Motorola and Flextronics bringing smartphone manufacturing to Texas

By Rhoda Miel
News Editor

Published: May 30, 2013 4:43 pm ET
Updated: May 30, 2013 4:45 pm ET

Related to this story

Topics Reshoring, Consumer Products, Electronics, Telecommunications, Injection Molding
Companies & Associations Flextronics International Ltd

Google Inc.’s Motorola Mobility group and Flextronics International Ltd. are bringing the first smartphone manufacturing to the United States, building the new Moto X at a Texas plant that was once home to cell phone manufacturing for Nokia.

Executives for Flextronics hint that the Fort Worth plant is the first ripple of a tide of new electronics production in the region that will include new wearable electronics.

“It’s not just about cell phones,” Flextronics CEO Mike McNamara said during a conference and webcast with analysts on May 30. “It’s about being part of an [manufacturing] eco-system. We don’t know everything it’ll entail, but we know we’ve been picked as [Motorola and Google’s] partner going forward.”

Motorola CEO Dennis Woodside teased some features of the Moto X during the All Things D technology conference, held May 29 in Rancho Palos Verdes, Calif.

In addition to the technology within the phone — which Dennis Woodside said will be able to anticipate a user’s needs — the phone with be a flagship product designed, engineered and assembled in the U.S., running on the software platform from Moto Mobility owner Google of Mountain View, Calif.

The new production site is a nearly 500,000 square foot plant within a free trade zone in Fort Worth that once employed 6,000 people making phones for Nokia. The site will eventually employ 2,000, with Flextronics as Motorola’s manufacturing partner.

Bringing production to Texas is more than good public relations, Woodside maintained. Regional manufacturing is a good business decision.

“[With distance] you lose the ability to innovate. You lose the ability to make fast changes,” he said.

Motorola, with designers in Illinois and California, will have far closer and easier contacts with production Texas.

The companies are not talking specifics about the type of manufacturing in Fort Worth. The Moto X will rely on a traditional supply chain, with processors made in Taiwan and organic LED screens from South Korea, Woodside said. But 70 percent of the assembly will occur in Texas.

Singapore-based Flextronics is looking to invest in its plastics and automation as part of its global long-term business plan, said Chief Strategy Officer David Mark. Automation, especially, will be key for an industry that is seeing rising labor costs in China — and growing interest in manufacturing in North America.

“What you’re looking at now is a shift not just from low cost but to where supply chains are making it possible to shift to a regional footprint,” said Tom Linton, Flextronics’ chief supply chain officer. “Labor arbitrage is no longer the defining element for supply chains of the future.”

Many of the biggest players in future technology do not even have their own manufacturing, Linton pointed out. They rely on companies like Flextronics to make the items that they design — companies like Apple Inc. and Google. Microsoft Corp. was a software company when it developed the Xbox gaming system, with Flextronics as its key manufacturer.

Linton pointed out that 250 Flextronics customers have no in-house manufacturing.

“Automation is the great equalizer,” said Mike Dennison, president of Flextronics’ High Velocity Solutions business group. “Automation allows us to take these products and move them to other places in the world — maybe places like Fort Worth, Texas.”

And while cell phones and smartphones and computer tablets have existing production and supply chains, the expected growth in wearable electronics opens all new product platforms, Dennison said.

Google has gotten plenty of press for its wearable glasses, but Flextronics has been involved in other products, such as Nike Inc.’s Fuelband, which helps its users track exercise and nutrition. The company created a special production line in Asia to make the Fuelband, which houses electronic sensors inside overmolded plastic components.

During the California technology conference, Motorola’s Woodside showed off an electronic identification system developed by MC10 Inc. of Cambridge, Mass., printed on a flexible film that can be applied to the skin. Technology like that, Dennison pointed out, simply cannot be made without automation.

“The human hand won’t be able to make the parts of the future,” he said. “We need technology to make those products in the way they’re being created.”

The deal to supply Google — which bought Motorola Mobility Holdings in 2011 — makes business sense in terms of pure dollars in sales, but it means even more for creating a new potential business future.

“If Motorola came to us alone last May and asked us to take over operations for its hand set [factories] in Brazil and China, we would have had zero interest in that,” McNamara said. “But Google has content, and it has software, and it has capability, and it has innovation. It has $100 billion and it has desire. We don’t know where that market is going, but there’s a whole infrastructure of things that are being created. Google is different than a standalone Motorola.

“That’s an ecosystem we need to be in. It can move into a lot of wearables, and we think a lot of that is going to happen in Silicon Valley. It’s a new product category that we need to be in.”


Comments

Motorola and Flextronics bringing smartphone manufacturing to Texas

By Rhoda Miel
News Editor

Published: May 30, 2013 4:43 pm ET
Updated: May 30, 2013 4:45 pm ET

Post Your Comments


Back to story


More stories

Spain's ITC Packaging acquires Coveris rigids plant

July 31, 2014 9:59 am ET

International packaging group Coveris Holdings has sold its Spanish business Coveris Rigid Spain, including an injection molding plant, to the...    More

PSB Industries acquires plastic closures specialist

July 31, 2014 3:47 pm ET

French packaging manufacturer PSB Industries has signed an agreement to acquire C+N Packaging Inc., which specializes in plastic closures for...    More

Buyer plans to sell former Hoover molding, assembly plants

July 31, 2014 2:06 pm ET

A former Hoover manufacturing plant with 150 injection machines in El Paso, Texas, and a nearby maquiladora plant in Juarez, Mexico, changed owners...    More

Image

Tessy investing $10 million in new plant, infrastructure

July 30, 2014 4:57 pm ET

Tessy Plastics Corp. continues to buy factory buildings in upstate New York — acquiring a 112,000-square-foot former Honeywell building in...    More

Image

One51 adding injection molder Straight to its bin molding portfolio

July 29, 2014 10:12 am ET

Dublin-based One51 plc has had its purchase of British trash bin maker Straight plc cleared by the United Kingdom's Competition and Markets Authority.    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events