Bemis sells Clysar shrink film division

Published: May 30, 2013 1:17 pm ET
Updated: June 3, 2013 3:14 pm ET

Image By: Clysar LLC Clysar LLC's shrink film manufacturing plant in Clinton, Iowa

Related to this story

Topics Mergers & Acquisitions, Financial, Packaging, Extrusion, Film & Sheet

Bemis Co. Inc. has sold its shrink film division Clysar to Cove Point Holdings LLC, a privately held investment firm based in New York.

Renamed Clysar LLC, Clysar will operate as a stand-alone, independent company. Its headquarters will move from Oshkosh, Wis., to Clinton, Iowa, the site of the company’s extrusion and converting campus and its original hometown. The Oshkosh location did not have manufacturing operations and will close.

Clysar officials would not disclose terms of the deal.

Clysar says it is one of the largest manufacturers of high-performance polyolefin shrink films for packaging applications. Its films are sold through two-step distribution and used strictly in non-barrier applications.

The company has about 300 employees. Employees at the Oshkosh office can transfer to the new Clinton headquarters.

The move will put all of the company’s primary functions, and it’s leadership, in one location, and ensure that everyone is firing on the same cylinder, said Vicki Larson, Clysar’s director of sales and marketing, by phone.

Clysar plans to add 8 to 10 news job in Clinton over the next month or two.

Operating as a private company will allow Clysar to focus on specific growth strategies. The company is currently number two in the shrink film market, behind Sealed Air Corp, Larson said. New technologies and innovations in areas like downgauged film will let Clysar not just compete in the marketplace, but move past the competition, she said.

Clysar will also have a chance to revitalize its research and development work and focus on new innovations, like opening up new markets for shrink films, she said.

As a stand-alone, the company also has more of an entrepreneurial spirit, she said. Cove Point and Clysar are willing to take more risk in developing a new opportunity, something that isn’t possible in a larger company.

“[We can] kind of take the blinders off a little,” she said.

Clysar was started 50 years ago by DuPont Co. and purchased by Bemis in 2002.

Clysar was one of Bemis’ smallest subsidiaries — it didn’t have a global reach as large as other businesses — and was the only business that sold into a distribution network rather than through direct sales. “We really weren’t a fit,” Larson said.

She noted that Clysar doesn’t make barrier films, like Bemis’ large Curwood division, or offer the same services as the firm’s new performance packaging business segment.

Bemis has been reorganizing since its purchase of the Food Americas operations of Alcan Packaging in 2010. When the company completes its facility consolidation plan later this year, it will have closed nine plants and moved production to other facilities.

“Now was just a good time for us to re-execute our vision and Bemis to execute theirs,” Larson said.

Bemis, based in Neenah, Wis., is one of the country’s largest packaging firms and is North America’s largest film and sheet manufacturer with annual sales of $5.3 billion, according to the most recent Plastics News ranking.

Bemis did not return calls seeking comment.

Cove Point is wholly owned by its chairman, William C. Morris. The firm said it aims to own, operate and grow manufacturing businesses in the United States.


Comments

Bemis sells Clysar shrink film division

Published: May 30, 2013 1:17 pm ET
Updated: June 3, 2013 3:14 pm ET

Post Your Comments


Back to story


More stories

Image

French investment firm buys Alabama-based CSP Technologies

January 30, 2015 1:10 pm ET

A French investment firm has finalized a deal to buy CSP Technologies Inc., an Auburn, Ala., company that makes specialty plastics packaging.    More

Image

Lubrizol buys Brazil-based coatings technology manufacturer

January 30, 2015 11:50 am ET

Specialty chemicals company Lubrizol Corp. of Wickliffe, Ohio, said it has acquired a Brazilian company that makes coatings technology for products...    More

Image

LG Hausys pulls out of Russian PVC profile market

January 30, 2015 11:17 am ET

LG Hausys Ltd., the building and decorative materials offshoot of South Korean giant LG Chemical Ltd., is pulling out of PVC window profile...    More

Image

Report: Brands are falling short on packaging sustainability

January 29, 2015 5:19 pm ET

Packaging in general, and plastic packaging in particular, has a long way to go in terms of recycling, according to a pair of environmental groups.    More

Image

Lund adds to aftermarket auto products portfolio with buy of Bushwacker

January 29, 2015 2:49 pm ET

Lund International Inc. has expanded its portfolio of plastic aftermarket vehicle accessories by acquiring Bushwacker Inc.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events