Avantium and Alpla working together on bio-based PET bottles

Published: June 3, 2013 11:49 am ET
Updated: June 14, 2013 1:40 pm ET

Related to this story

Topics Packaging, Sustainability, Blow Molding, Materials Suppliers

Renewable chemicals firm Avantium is teaming up with packaging major Alpla Werke Alwin Lehner GmbH to develop bottles made from polyethylene furanoate, a bio-based alternative to PET.

The joint development agreement will help to accelerate the commercial rollout and industrialization of PEF, according to a May 30 news release.

Alpla will develop PEF bottles for personal- and home-care applications like cosmetics and detergents. The blow molder will also make bottles for food applications such as sauces, dressings, baby foods and edible oils.

The two companies will also work on developing PEF bottles for beer and alcoholic beverages.

Beer in PET bottles is big in Eastern Europe, but hasn't caught on in Western Europe or in the U.S.; PEF can change that, said Nathan Kemeling, Avantium's director of business development for YXY.

PEF has better barrier properties than PET — 10 percent better for oxygen and 4 percent better for carbon dioxide, as well as an improved water barrier, he said.

There's always some hesitation when switching a product from glass bottles to plastic bottles, but because PEF is bio-based and recyclable, it could make plastic beer bottles a new trend, he added.

Alpla, based in Hard, Austria, produces bottles, preforms and caps at more than 149 plants in 39 countries.

This is Avantium's third notable partnership; the Amsterdam-based firm is also collaborating with the Coca-Cola Co. and Groupe Danone on producing bio-based bottles, including Coke's iconic PlantBottle.

The goal of these collaborations is to bring 100 percent bio-based PEF bottles to market by 2016.

The company is on track to meet that goal, Kemeling said.

Avantium's PEF recently won the company an Innovation in Bioplastics Award from the Washington-based Society of the Plastics Industry Inc.'s Bioplastics Council.

Avantium is the first recipient of SPI's newly established award, which recognizes "outstanding innovation in unique and creative application of bioplastics materials, products or processes by a company," according to an SPI news release.

Avantium currently supplies its partners with PEF produced at its pilot plant in Geleen, Netherlands. The firm is planning to open a 50,000-ton commercial plant in 2016 to enable a full commercial launch and bring PEF bottles to consumers.

PEF is a 100 percent bio-based and recyclable polyester, developed to replace conventional materials like PET. The material is made with Avantium's YXY technology — a catalytic technology that converts carbohydrates from plants into chemical building blocks for bioplastics, including a bio-based alternative to terephthalic acid.

Along with superior barrier properties, PEF has other performance benefits, like a higher gloss transition temperature that allows hot-fill opportunities, Kemeling said.

The material also offers environmental benefits; life-cycle analysis has shown a 70 percent reduction in non-renewable energy usage and carbon footprint, compared to PET, he said.

When PEF is produced on an industrial scale, it will also be cost-competitive with PET, he said.

"You can have new applications, be bio-based, have performance benefits, but at the end, it's the price that counts," he said.

While most of its focus has been on bottles, Avantium is also exploring new applications for PEF. It's working with various partners on fiber developments and searching for similar partners to work with on developing thin films, Kemeling said.


Comments

Avantium and Alpla working together on bio-based PET bottles

Published: June 3, 2013 11:49 am ET
Updated: June 14, 2013 1:40 pm ET

Post Your Comments


Back to story


More stories

PSB Industries acquires plastic closures specialist

July 31, 2014 3:47 pm ET

French packaging manufacturer PSB Industries has signed an agreement to acquire C+N Packaging Inc., which specializes in plastic closures for...    More

PE suppliers go after oxo-biodegradable technology in Mexico

July 31, 2014 1:12 pm ET

Mexican industry defends itself, calling claims 'misleading'    More

Bioplastic created using rice starch

July 31, 2014 10:40 am ET

The new transparent, biodegradable material has a high degree of mechanical strength and good thermal resistance.    More

Image

New technology molds plastic with consumable liquid

July 31, 2014 9:40 am ET

A new blow molding and filling technology called LiquiForm has been announced that uses pressurized consumable liquid instead of compressed air to...    More

Image

DC banning PS foam containers

July 30, 2014 2:34 pm ET

Washington D.C. Mayor Vincent Gray signed into law on July 29 a bill that will ban polystyrene foam food and drink containers from the District.    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events