Coffee makers wrestle with recyclability of single-serve pods

Jennifer Kalish

Published: June 3, 2013 11:24 am ET
Updated: June 3, 2013 11:30 am ET

Image By: Green Mountain Coffee Roasters Inc. Consumers are becoming more aware of issues related to recycling one-cup coffee pods.

Related to this story

Topics Packaging, Sustainability

As America's culture of convenience continues to flourish, single-cup coffee makers have become increasingly popular among coffee drinkers. But beneath those expedient one-cup coffee pods lies a growing environmental problem.

"These things aren't readily recyclable, if recyclable at all," said Darby Hoover, senior resources specialist for the Natural Resources Defense Council. "Anytime you've got this kind of small, single-use packaging option, especially when there are clearly alternatives, it just leads me to question why you would promote that system over another that works just as well for many applications."

Approximately 13 percent of the U.S. adult population drinks a coffee made in a single-cup brewer every day, according to a 2013 study from the National Coffee Association. That's up from only 4 percent in 2010, said Joe DeRupo, director of communications for the NCA.

But as consumers become more and more aware of the recyclability issue, single-serve coffee manufacturers are looking for more sustainable solutions.

Green Mountain Coffee Roasters Inc., which acquired Keurig in 2006 and has since become the largest manufacturer of single-use coffee brewers in the country, has been struggling with the recyclability of Keurig's K-Cups from the beginning.

"The system has a lot of pretty demanding technical requirements in terms of being able to withstand certain amount of temperature and to have a certain kind of rigidity, and provide the right kinds of moisture barriers and oxygen barriers and the like," said Mike Dupee, vice president of sustainability for Green Mountain. "So it isn't the simplest challenge."

Like most single-cup coffee pods, K-Cups consist of a combination of plastic, aluminum, organic material (coffee grounds) and a paper filter. While all said items can be easily recycled separately, the K-Cup as a whole cannot be recycled on a municipal level.

"It's that hybrid packaging that makes it very hard for traditional recycling companies," said Albe Zakes, global vice president of public relations at the recycling company TerraCycle. "If you think of something as simple as a chip bag for example, a chip bag is fully recyclable. The challenge is that it's both plastic and aluminum, a hybrid packaging, which is very common, especially in food and beverage."

Since 2009, TerraCycle has partnered with various single-serve coffee manufacturers to provide recycling solutions for spent coffee pods. By teaming up with Tassimo, Mars Drinks, Nespresso and more recently Illy, TerraCycle has developed a customized take back program for each company that has helped divert millions of coffee pods from landfills across the country.

"Over the last couple years, TerraCycle has already collected I believe 25 million coffee capsules of the various applications through all these programs," said Zakes. "As we expand with more companies, bringing Illy into the fold, we've really ended up in a place where we work with basically everyone except for the K-Cup."

Despite reaching out to the company multiple times, TerraCycle has not been able to develop a relationship with Green Mountain, Zakes said.

However, that doesn't mean the company isn't working toward a solution on its own. In recent years Green Mountain has been looking for ways to use design to combat the issue of recyclability, Dupee said.

"With the VUE [brewing system] we're now in a polypropylene cup that you're able to use the tab and peel out the filter, coffee and lid and recycle the cup. So that's a great example I think of using design to try and improve; it's certainly not the end game by any means, but it is a demonstrable step forward," he said.

All materials recovery facilities have different size limits for items they can accept, and whether or not the VUE cups are recyclable, they may not be recycled down the line, said Hilary Gans, facility operations contract manager with the South Bayside (Calif.) Waste Management Authority.

"Because the items are so small, they typically wind up either as residue mixed in with broken glass in the glass stream, or they might wind up in mixed paper," he said.

Green Mountain is experimenting with various materials for a new, recyclable K-Cup, though nothing is in production yet.

"We tried a paper-based tea portion pack probably two years ago, and it didn't perform so we took it down," Dupee said.

In addition, the company has a pilot take-back program for its workplace customers where the coffee grounds are sent to a compost facility and the rest of the materials are sent to a Covanta Energy Corp. waste-to-energy facility. Green Mountain recovered more than 7.5 million portion packs since the program began in July 2011, Dupee said.

Incineration, of course, doesn't sit well with many environmentalists who often fight against new and old WTE facilities.

"I know and I appreciate that Green Mountain has been trying to wrestle with ways to make its pods more environmentally sustainable pretty much the whole time that they've been offering them," said Hoover, the senior resources specialist for the NRDC. "But incinerating them instead of recycling them doesn't reduce the need to rely on virgin source materials to make oodles more of these disposable pods."

Dupee said the end-of-life portion of K-Cups' lifecycle has the least overall impact

The question remains whether the convenience of single-serve coffee systems is worth the overall environmental impact.

"The trade-off that we need to consider is, for shaving a few seconds off the amount of time it takes me to make my coffee in the morning, what is it costing in terms of what's going to the landfill, what kinds of non-renewable source materials like fossil fuel-derived plastics are being used, and what other environmental costs are associated with that."


Coffee makers wrestle with recyclability of single-serve pods

Jennifer Kalish

Published: June 3, 2013 11:24 am ET
Updated: June 3, 2013 11:30 am ET

Post Your Comments

Back to story

More stories


Tighter resin prices leading to price hike for PE film

August 29, 2014 11:13 am ET

One of North America's largest film makers is pushing through a polyethylene price increase due, in part, to the tight resin market.    More


Green trend boosts plastic building materials business in China

August 29, 2014 9:42 am ET

The greening of China's domestic building materials market is giving the plastics industry a boost.    More


Pregis, Sealed Air settle film-foam patent dispute out of court

August 28, 2014 1:01 pm ET

A couple of packaging companies are settling their patent fight over film-foam underlayment.    More


Truce? ACC, US Green Building Council agree to work together on LEED

August 28, 2014 12:08 pm ET

The American Chemistry Council (ACC) and the U.S. Green Building Council (USGBC) announced Aug. 27 that they will be working together on a new...    More


Bag usage drops 71% in Northern Ireland

August 28, 2014 10:41 am ET

A shopping bag fee in Northern Ireland has resulted in a 71.8 percent reduction in bag numbers in its first year of operation.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report


In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events