Polystyrene prices up, but PVC falls in May

By Frank Esposito
Senior Staff Reporter

Published: June 6, 2013 2:27 pm ET
Updated: June 6, 2013 2:29 pm ET

Related to this story

Topics Materials, Materials Suppliers, Resin Pricing

North American markets for solid polystyrene and suspension PVC resin in May reversed their directions from earlier in the year, with PS prices rising and PVC sliding.

The PS move saw prices rise 2 cents per pound in May after falling a total of 5 cents earlier in the year, including a 3-cent drop in April. Higher prices for benzene feedstock played a role in the PS increase, as benzene prices for May settled at $4.47 per gallon, up almost 3 percent vs. April.

The early-year price drops mean that regional PS prices remain down about 2 percent so far in 2013. Benzene prices — even after the May increase — are down about 13 percent from their January levels.

In the first four months of 2013, solid PS demand essentially was flat vs. the year-ago period, according to the American Chemistry Council in Washington. One area of strength for the market was in sales of solid PS into the electrical/electronic end market, where four-month sales were up 12 percent.

For PVC, regional prices fell an average of 2 cents per pound in May after being flat in April and up a total of 8 cents earlier in the year. Even with the 2-cent May drop, regional suspension PVC prices remain up about 6 percent so far in 2013.

Buyers cited lower demand as a reason for the price decline in May, as many PVC processors already have stocked up on resin needed for the construction season. Building and construction applications generate a majority of North American PVC demand.

Four-month PVC demand in the U.S, and Canada essentially was flat vs. the same quarter in 2012, according to ACC. An increase of more than 1 percent in domestic demand was negated by a drop of almost 4 percent in export sales.

Domestic sales into PVC’s market-leading rigid pipe and tubing sector grew almost 3 percent in the first four months of 2013. That category accounted for 45 percent of four-month domestic PVC demand. But sales of PVC to domestic resellers and compounders tumbled 13 percent during the period. That sector accounted for almost 10 percent of four-month domestic PVC demand.

Longer-term U.S. construction trends remain positive for the PVC market. Housing starts — including single-family and multi-family units — commenced at an annual pace of 853,000 in April, according to the National Association of Homebuilders. That was the lowest rate so far in 2013, but was still 9 percent above the full-year 2012 level. The four-month average rate of 935,000 housing starts would be almost 20 percent higher than 2012 if it continues for the rest of the year.


Comments

Polystyrene prices up, but PVC falls in May

By Frank Esposito
Senior Staff Reporter

Published: June 6, 2013 2:27 pm ET
Updated: June 6, 2013 2:29 pm ET

Post Your Comments


Back to story


More stories

Image

Material Insights: PP production issues, preparing for NPE

January 26, 2015 1:38 pm ET

Production problems in Texas add more complication for polypropylene, Entek has new equipment ready to show compounders at NPE and we take a look...    More

Image

J6 Polymers to buy Stepan unit

January 26, 2015 12:22 pm ET

NORTHFIELD, ILL. — Stepan Co. plans to sell its specialty polyurethanes systems business to J6 Polymers LLC in a cash deal.    More

Image

UK legislators debate fracking

January 26, 2015 12:19 pm ET

LONDON — An influential group of members of Parliament has called for a moratorium to be imposed on fracking for shale gas as politicians...    More

Image

Oxo-biodegradable lobby slams 'scaremongering'

January 26, 2015 12:16 pm ET

Single-use plastic carrier bags made from biodegradable material should be exempted from the government’s proposed 5p-a-bag levy in England,...    More

Image

2014 leaves some resin firms in the black while others struggle

January 23, 2015 2:37 pm ET

On the financial side, 2014 was good for Hexcel Corp., so-so for Celanese Corp. and it could have been better for Omnova Solutions.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events