Arburg Technology Days highlight production efficiency

James Snodgrass
EUROPEAN PLASTICS NEWS

Published: June 6, 2013 12:57 pm ET
Updated: June 10, 2013 10:59 am ET

Image By: Arburg Arburg demonstrated 40 Allrounder presses at its technology center

Related to this story

Topics Machinery, K 2013
Companies & Associations Arburg GmbH + Co. KG

LOSSBURG, GERMANY — Around 5,000 industry professionals descended upon the small Black Forest town of Lossburg in March for Arburg GmbH + Co. AG’s Technology Days 2013.

Arburg has been traditionally known as a maker of smaller machines. In the Lossburg factory’s heritage center, the reason for this is clear. The company was founded in the 19th century and originally produced surgical instruments. In the 1950s it began to build camera flash units for amateur photographers. Finding that the units were sensitive to variations in temperature and humidity — they were reported to go off without warning in hot, humid climates — the company realized the units needed plastic shrouds to encapsulate the delicate wiring. Unable to find an injection molding machine small enough to make the part, the company developed its own: a simple, hand-operated unit that looked somewhat like an elaborate espresso machine.

From 1952 its future direction was clear: as a maker of injection molding machines.

But now Arburg wants to shake off the “small” tag, eager to demonstrate larger machines, such as the hybrid Allrounder 670H with a clamping force of 2,500 metric tons, and injection unit sizes up to 2100.

At the opening news conference, the company announced its financial performance for 2012, revealing an anticipated consolidated turnover at 488 million euros — an increase of around 4 percent compared with 2011.

Managing partner Michael Hehl anticipates future growth in Asia and South America, with most growth coming from the Far East.

Asked if the economic crisis in southern Europe would affect Arburg’s business, Helmut Heinson, managing director of sales, contended: “Well of course, but not to the extent you might expect. In Spain we are keeping sales on previous years. France is fine, the [United Kingdom] is fine.”

Heinson identified the United States as Arburg’s biggest foreign market. But he also considered the Far East as having the best potential for growth despite Arburg’s machinery being relatively expensive compared with locally-sourced machinery.

The theme of the Technology Days was “production efficiency” with a dedicated exhibition — the “Efficiency Arena” — highlighting efficiency in all the stages in the process, including design, molds, machine technology, peripherals, configuration, process integration, process control and production planning

The Product Design station illustrated the importance of optimizing components from the outset. Working with CAD/CAM partner Men at Work, Arburg demonstrated how computer-based design and production, used in conjunction with injection molding simulation programs and computer tomography, could offer potential savings.

On to Mold Technology, mold-making partner Männer showed how precision, large production volumes and rapid cycles could be combined in a single concept. This was demonstrated with an electric Allrounder 470 A using a 64-cavity mold with near-contour cooling and hot runner needle shut-off system. Part geometry had been optimized for fast, reliable injection. The companies claim the system could make up to 450 million parts per year with a cycle time of 2.2 seconds.

At the Machine Technology stand, Arburg produced a PC valve housing on an Allrounder Golden Edition which it claims can produce 282,000 more components per year than a comparable older hydraulic machine, while consuming 14,200 kWh less energy.

To illustrate Peripheral Technology, partner firm HB Therm showed how increases in efficiency can be achieved by using appropriately dimensioned temperature control devices.

Arburg used the Configuration stand to demonstrate how important it is to make the right choice of injection unit and screw diameter — because the highest energy consumption occurs during plasticizing.

Process Integration was demonstrated by partner firm Zahoransky, using a vertical Allrounder 275 V with a robotic system to overmold injection needles for disposable cannulas for medical use.

Process Control was demonstrated with the production of a business card box in a system monitored with a central Selogica control system. Individually adjusted process parameters and integrated quality monitoring helps reduce cycle time by about 0.5 seconds and daily downtime by 10 minutes in this example.

The Production Planning stand was an opportunity for Arburg to demonstrate its host computer system, ALS. Arburg’s experts explained how ALS-organized production compared with manual production. They demonstrated how computer aided-production reduced bottlenecks, improved machine availability (by reducing setup times by six minutes per order) and reducing downtime by three minutes per day.

In the company’s Customer Center, Arburg showed over 40 Allrounder exhibits. Highlights included an Allrounder 470 C Golden Edition molding cups from a 100 percent bio-derived PET. Technical managing director Herbert Kraibühler, said that with the bio PET, “we are getting closer to traditional materials, except with a lower melt temperature.”

Also on a bio-materials theme, an Allrounder 370S was making boxes using PLA with a timber fiber content of nearly 60 percent. Kraibühler invited visitors to sniff the boxes — which smelt distinctively wood-like — but noted that there was further development to come as the boxes were too brittle for practical use.

Packaging has been identified as a growth market for the company. To demonstrate this, it showed off an Allrounder 570 H packaging version producing IML food containers in 4.5 seconds, with a material throughput of over 22 kg. per hour. To prove that the hybrid machine was precise in its movements, Kraibühler pointed to the floor and said: “Look! No labels have dropped on the floor!”

The exhibit featured a 2-cavity mold from ATS and used the IML process to produce the thin-walled food containers. The labels and the finished molded parts are handled by an IML system from Sepro.

Media attendees were given guided tours of the labyrinthine Lossburg plant, taking in every stage of the Arburg machines’ production and the impressive warehousing facilities and inter-plant logistics systems. There is a high degree of automation. Machine cabinets are cut, folded and stacked on pallets ready for final assembly by co-operating robots. Arburg prides itself on producing the vast majority of its machines’ components, including printed circuit boards, in-house. The tour terminated in the delivery hall where machines are tested in situ by the customers to optimize their performance before delivery.

Arburg also used its Technology Days to host their sixth annual Energy Efficiency Award. The 2013 prize was given to AMK, the Kirchheim, Germany-based maker of drive and control technology. Joining previous winners including Tyco and Lego, AMK was given the prize for its use of energy-optimized Allrounders in its own injection molding plant, which is used to make components for its drive technology which, in turn, is used in Arburg’s electric-powered machines.


Comments

Arburg Technology Days highlight production efficiency

James Snodgrass
EUROPEAN PLASTICS NEWS

Published: June 6, 2013 12:57 pm ET
Updated: June 10, 2013 10:59 am ET

Post Your Comments


Back to story


More stories

Image

Report: Global machinery sales to India continue to fall

January 21, 2015 9:53 am ET

Difficulties in India's manufacturing sector are continuing to hit German plastics and rubber machinery exports, with sales to India down 15 percent...    More

Image

Gerd Liebig returns to Demag business

January 19, 2015 8:33 am ET

UPDATED — Gerd Liebig, the former head marketing manager of Engel Holding GmbH, has been appointed managing director-chief sales officer at...    More

Image

Expect to see Baxter's 'face' in more plants this year

January 16, 2015 12:32 pm ET

Expect many more Baxters working on the manufacturing floor this year.    More

Image

Romi drops the Sandretto badge

January 16, 2015 12:26 pm ET

Brazilian injection molding machinery group Indústrias Romi SA is dropping the Sandretto badge from the beginning of this year.    More

Image

Reifenhauser Kiefel Extrusion changes its name to Reifenhauser Blown Film

January 15, 2015 9:40 am ET

Reifenhauser Kiefel Extrusion has been renamed Reifenhauser Blown Film, and parent company Reifenhauser GmbH is investing more than 2 million euros ($...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events