Thermoforming IML pioneer Tech II adds line, and now extrudes its own sheet

By Bill Bregar
Senior Staff Reporter

Published: June 11, 2013 12:21 pm ET
Updated: June 11, 2013 12:24 pm ET

Related to this story

Topics Extrusion, Film & Sheet, Thermoforming

Tech II Inc., which has pioneered in-mold labeling for thermoforming in North America, has bought a second TSL thermoforming machine. The company also is now extruding its own polypropylene sheet.

Tech II President Eric Shiffer said the packaging company had been purchasing its sheet from outside suppliers. “Self-manufacturing our own sheet came from a desire for greater vertical integration — to control quality and costs — but even more importantly, to experiment and innovate on a confidential basis, accelerating the innovation cycle,” Shiffer said. “This allows us to experiment with products in a proprietary way, without giving away any secrets we develop.”

Used for years in injection molding, in-mold labeling gives high-level graphics for packaging. Thermoforming has faster cycles and makes thinner parts.

About a year ago, the Springfield, Ohio-based maker of food packaging started production on its first IML thermoformer, an FT3500 thermoformer from Thermoforming Systems LLC of Union Gap, Wash. The mold and automation for that first line came from Hekuma GmbH in Eching, Germany. Shiffer said the first whole production line has the capability to form on a 14-cavity mold. It is making a new packaging product.

In February of this year, Tech II started extruding sheet on a Welex line that that can produce two-layer or three-layer sheet, with film lamination capability. Welex, which announced the news June 4, said the line can be expanded into full barrier sheet production. It can handle up to five additional extruders, including additional rolls for additional sheet cooling. The Welex DB-W feedblock has a modular design so feedblock sections and extruders can be added.

That will allow Tech II to produce high barrier sheet containing EVOH (ethylene vinyl alcohol) and adhesives or two-color sheet with a core layer of recycled plastic. Right now, Tech II is laminating to get the barrier layer.

Welex President and CEO David Schroeder called IML thermoforming “cutting-edge innovation.” Welex is based in Blue Bell, Pa.

Shiffer said the company is extruding the sheet onto rolls, which are moved into position for the two thermoforming machines. Both Thermoforming Systems machines feature TSL’s Tilt Technology, where the bottom platen rotates to allow automation to insert the labels and remove finished parts.

Shiffer said that a few weeks ago, Tech II began running parts on the second TSL thermoformer, an FT4K, a larger machine and complete production line that can mold up to 21 cavities. The FT4K is paired with an automation system from Ilsemann Automation of Bremen, Germany, and a mold from Mould & Matic Solutions GmbH of Micheldorf, Austria.

The second IML thermoformer is making a packaging product that will hit the market Aug. 1, Shiffer said.

He declined to give details about either of the thermoformed ILM products.

The core business of the family-owned Tech II is injection molding food containers, lids, bowls and cups. Tech II runs 50 injection molding machines, turning out 15 million pieces a day.

Tech II executives wanted to diversity into thermoforming — with IML, the first time the technology has been used in North America — to set the company apart.


Comments

Thermoforming IML pioneer Tech II adds line, and now extrudes its own sheet

By Bill Bregar
Senior Staff Reporter

Published: June 11, 2013 12:21 pm ET
Updated: June 11, 2013 12:24 pm ET

Post Your Comments


Back to story


More stories

Image

LG Hausys pulls out of Russian PVC profile market

January 30, 2015 11:17 am ET

LG Hausys Ltd., the building and decorative materials offshoot of South Korean giant LG Chemical Ltd., is pulling out of PVC window profile...    More

Image

Lund adds to aftermarket auto products portfolio with buy of Bushwacker

January 29, 2015 2:49 pm ET

Lund International Inc. has expanded its portfolio of plastic aftermarket vehicle accessories by acquiring Bushwacker Inc.    More

Image

Profit dips at Bemis Co. Inc.

January 29, 2015 2:04 pm ET

Profit dipped for Bemis Co. Inc. for all of 2014, but were up during the fourth quarter in what the company's leader called a “pivotal year....    More

Image

Falcon Plastics expands in South Dakota

January 29, 2015 11:45 am ET

Falcon Plastics Inc. is putting the final touches on a 60,000 square foot addition that will nearly double the size of its Brookings, S.D.,...    More

Image

MonoSol optimistic it can reach new markets with water soluble films

January 26, 2015 4:46 pm ET

MonoSol LLC — riding a wave of growth spurred on by the rapid adoption of water soluble detergent packets in recent years — is looking to ...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events