Asia-focused DSM highlights diverse applications

By Robert Grace
Associate Publisher & Business Development Director

Published: June 13, 2013 12:02 pm ET
Updated: June 13, 2013 12:04 pm ET

Related to this story

Topics Materials, Materials Suppliers, CHINAPLAS
Companies & Associations DSM NV

GUANGZHOU, CHINA — Officials of DSM Engineering Plastics talked about their Asian investments and detailed several diverse materials applications during a media briefing in Guangzhou on May 20 at Chinaplas.

Michael Koch, the unit’s Asia Pacific president, said Netherlands-based parent Royal DSM NV reported sales in China last year of $1.7 billion and aims to boost that to $3 billion by 2015. The group, which began trading with China in 1963, currently employs about 3,500 in the country, has 40 affiliates and operates 26 manufacturing sites there. Koch estimated that DSM will invest $1 billion in research and development in China between 2011 and 2015.

As for current projects, Koch provided capacity numbers for the first time for its previously reported expansion of the firm’s polymerization and compounding plants in Jiangyin. Due online next year, the project will double capacity to 400,000 metric tons, or about 882 million pounds. The firm also is currently doubling capacity at its caprolactam facilities in Nanjing, and Koch said DSM “is looking to partner with firms so we can increase our captive use of caprolactam.”

In addition, the company recently opened its first application development center for engineering plastics in Japan (in Yokohama), and said that by next year it will add a technical services center in Pune, India, alongside its manufacturing plant there. And it is planning to open a technical center in Nanjing in 2014.

DSM Engineering Plastics last year moved its global headquarters to Singapore, emphasizing the unit’s emphasis on Asia. Koch also said his group is still in “intensive discussions” with Chengdu-based polyphenylene sulfide resin maker China Lumena New Materials Corp. about jointly marketing some engineering plastics and jointly developing alloys of PPS and nylon 4/6. But, said Koch, there is nothing to announce yet.

Officials also highlighted recent electrical/electronics, automotive, flexible food packaging and consumer goods applications. Among them:

  •  Zhenjiang, China-based Jiangsu Phono Electric Co. Ltd. is the first company to select DSM’s engineering plastics to replace thermosets in a molded-case circuit breaker with an open-arc chamber. MCCBs are heavy-duty circuit breakers typically used in industrial and commercial applications, and they operate at far higher electrical ratings than comparable residential products. DSM said its resins offer both performance and aesthetic advantages over the bulk molding compounds traditionally used in this demanding application. It estimates that system cost savings of 10-15 percent are feasible. The materials used include Stanyl-brand nylon 4/6 and halogen-free, fire-resistant grades of Akulon nylon 6 and 66.
  •  German automaker Mercedes-Benz has chosen a high-performance nylon made largely from renewable resources for the engine beauty cover on the turbo-powered, gasoline-engine versions of its new A-Class cars. DSM said about 70 percent of the raw materials used to make the nylon 410 in its EcoPaXX Q-HGM24 reinforced compound come from the castor plant. Operating temperatures can reach 200° C, or 392° F, and the cover must be lightweight and yet still able to resist high dynamic loads from engine vibrations. This application marks the first time that EcoPaXX grade has been used for high-volume mass production. BPP Kunststoffwerk Marbach Baier GmbH built the production tooling and supplies the molded engine cover to Mercedes.
  •  ETM Engineering Technologie Marketing GmbH of Saalburg-Ebersdorf, Germany, became the first company to deliver extrusion-blow-molded serial air ducts made from DSM’s Stanyl Diablo OCD 2305 BM, a special heat-stabilized grade of Stanyl nylon 4.6. It produced the hot-charge air ducts for Volkswagen, and claims a significant cost benefit compared to polyphenylene sulfide due to the nylon’s lower weight and scrap rate. DSM claims a part weight reduction of 7 percent vs. PPS.
  •  Special grades of DSM’s Akulon nylon 6 are finding use in fuel tanks for vehicles and appliances with small engines, such as recreational vehicles, small tractors and lawn and garden equipment. The tanks, molded in Akulon Fuel Lock, conform to the toughest evaporative-emission standards in the world, the resin maker said. “Fuel tanks in Akulon Fuel Lock are already being produced in China for Kohler engines used on lawn mowers supplied to the U.S. market,” according to Noble Zhang, general manager for Kohler China.


Comments

Asia-focused DSM highlights diverse applications

By Robert Grace
Associate Publisher & Business Development Director

Published: June 13, 2013 12:02 pm ET
Updated: June 13, 2013 12:04 pm ET

Post Your Comments


Back to story


More stories

Image

'Thermoforming has nearly limitless possibilities'

April 18, 2014 12:54 pm ET

Julie McAlindon of PolyOne Corp. speaks about the future of thermoforming and the integration of Spartech Corp.    More

Image

Ascend targets nylon for auto applications, opening propylene monomer unit in Texas

April 18, 2014 10:57 am ET

Materials firm Ascend Performance Materials Inc. is in full operation at its new nylon 6/6 compounding line in Florida and will break ground by the...    More

Dutch company launching $100 million PP, PE recycling plant

April 18, 2014 10:42 am ET

Quality Circular Polymers is building a new plastics recycling operation in Geleen, the Netherlands' Chemelot industrial chemical site, with a...    More

Lumena suspends trading, delays report amid claims of 'misrepresenting' financials

April 18, 2014 10:19 am ET

China Lumena New Materials Corp., which says it has the world's largest manufacturing capacity for polyphenylene sulfide resin, has suspended its...    More

PolyQuest spins off FiberQuest unit

April 18, 2014 10:14 am ET

PolyQuest Inc. has spun off its FiberQuest unit — which distributes polyester staple fibers and cotton — as a separate company.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events