Infinity Compounding launches antimicrobial concentrates

By Gayle S. Putrich
Staff Reporter

Published: June 20, 2013 4:23 pm ET
Updated: June 20, 2013 4:24 pm ET

Related to this story

Topics Medical, Materials, Materials Suppliers

PHILADELPHIA — Infinity Compounding Corp. launched is new line of antimicrobial concentrates and compounds at the MD&M East medical device trade show, held June 18-20 in Philadelphia June 18-20.

Dubbed Inhibit, the new additive can be included in any structural, lubricated electrically active or colored custom compound, said Infinity Vice President Tim Carroll. The antimicrobial additives, based on silver functionalized clay, prevent bacteria, fungus and other microorganisms from growing on the surfaces of medical devices large and small for “several years.”

Though Inhibit is not intended to replace gamma or ethylene oxide (EtO) sterilization, Carroll said, current testing shows the silver additive is effective at killing Staphylococcus aureus (MRSA) at loads as low as 1 percent, without effecting the color or surface appearance of the plastic.

“You still have to clean the instrument but when you walk away and someone touches it, you didn’t lose the effect of cleaning it 5 minutes later,” he said. “They keep taking stronger bases and stronger solvents to clean these instruments and machines and they’re staring to now attack the plastics instead of the bugs. This combination of antimicrobial additives plus being able to put them into more chemically resistant, higher temperature resins I think is going to be a growing market for us.”

So far, most interest in the antimicrobial additives have been from molders using ABS, polypropylene and polycarbonate, Carroll said, “not really anything high-temperature yet, but hopefully soon.” In addition to medical applications, Carroll said he also sees a future for Inhibit in other areas, particularly sports and recreation equipment.

“Wouldn’t that be great to be able to go to the gym and wipe down the equipment and not have to worry about what the last sweaty guy left on there that you can’t see?” he said.

At the close of 2012, Swedesboro, N.J.-based Infinity was acquired by color and additive concentrates Americhem Inc. of Cuyahoga Falls, Ohio. Carroll said Infinity will operate as a wholly owned subsidiary with its existing management team, including Carroll, who founded the company in 2005 with President Carlos Carreno, who is also staying put.

One of the advantages in the deal is Americhem’s existing operations in China, which will include some of Infinity’s catalogue, including Inhibit before the end of the year, Carroll said.


Comments

Infinity Compounding launches antimicrobial concentrates

By Gayle S. Putrich
Staff Reporter

Published: June 20, 2013 4:23 pm ET
Updated: June 20, 2013 4:24 pm ET

Post Your Comments


Back to story


More stories

Image

Houston Plastic continues to grow with new press, controlled production area

October 1, 2014 11:32 am ET

Custom injection molder Houston Plastic Products Corp. has extended its clamp tonnage range and added an environmentally controlled molding area.    More

Image

Global Plastics Summit puts PE prices in the spotlight

October 1, 2014 3:17 pm ET

Product manufacturers may start to shift away from polyethylene because of high prices, according to two major plastics processors.    More

Image

Nucleation offers solution to shrinkage in HDPE closures

October 1, 2014 1:57 pm ET

For caps producers, nucleation can provide a practical solution to eliminate shrinkage variations in high density polyethylene beverage closures....    More

Image

Dow loses appeal in price fixing case

October 1, 2014 11:10 am ET

The Reuters press agency reports that a federal appeals court in Denver has rejected Dow Chemical Co.'s attempt to overturn a $1.06 billion fine...    More

Image

New Hexcel plant will supply carbon fiber for Airbus A350 XWB

September 30, 2014 2:43 pm ET

Hexcel Corp. is investing $250 million on a new carbon fiber plant in France, with part of the production going into the future Airbus SAS A350 XWB.    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events