Program gives fraternities discounts on Solo cups if they hit recycling goals

Kerri Jansen
WASTE & RECYCLING NEWS

Published: June 20, 2013 1:12 pm ET
Updated: June 20, 2013 1:14 pm ET

Related to this story

Topics Sustainability, Food service

Twenty-five men living in the same fraternity house can generate a lot of garbage, including the debris of social events heavy on bottles, cans and plastic cups that are often trashed instead of recycled.

At the University of Michigan, a student organization is working to introduce recycling into fraternities by offering financial incentives.

Fraternities are often disconnected from university sustainability movements, making them difficult to reach through traditional programs, said Kevin Kononenko, founder and president of U-M's Greek Life Sustainability Team (GLIST). Until recently, only one of the university's fraternities had any recycling program.

"What I had noticed on campus was that the sustainability community, or people interested in taking action on sustainable things, were very exclusive in the sense that people tended to work with people they already knew, or with people they knew would be allies as opposed to trying to engage the greater university community and expand the reach of people interested in sustainability," said Kononenko, a Program in the Environment major going into his senior year.

Kononenko founded GLIST to help expose the Greek community to ideas of sustainability. Its first program, Trust for Cups, offers fraternities discounts on single-use plastic cups, a party staple, in return for their hitting a 35 percent recycling rate. Since its launch, Trust for Cups has reached 40 percent of the 30 fraternities governed by U-M's Interfraternity Council.

Once a fraternity signs on to the program, they must institute a sustainability chair, one of their own members who will oversee recycling and other sustainability efforts in the fraternity. It typically takes about eight weeks for a fraternity to reach a 35 percent recycling rate by volume, Kononenko said.

Recyclables are collected by Recycle Ann Arbor, a non-profit organization that provides recycling services for the area.

GLIST worked with Dart Container, the single-use cup and container giant, to make discounted cups available to successful fraternities, something that can save them hundreds of dollars each year.

"At Dart Container, we are committed to supporting efforts to make recycling materials easier and accessible to residents across the country," Michael Westerfield, Dart Container's director of recycling, said in a statement. "We support recycling efforts in a number of ways, including the Trust for Cups program at the University of Michigan. It is exciting to see students making a difference to reduce waste in our landfills and believe it is an important step to a lifetime commitment to recycle, reuse and reduce waste."

Michael Lopatin is current sustainability chair at Delta Kappa Epsilon, a Trust for Cups pilot fraternity. After the brothers of Delta Kappa Epsilon voted to implement the recycling program, Lopatin placed three recycling bins he'd ordered online in common areas next to trash bins, and consistently reminded members to recycle, particularly during organized house clean-ups, he said.

"Once people kind of bought into that and it took a little reinforcing of, 'Hey, this is how we're getting those discounts that we enjoy, so we have to give back on our end,' people kind of got on board," Lopatin said. "The biggest thing is every now and then just we remind them about what we're getting back, which are these positive financial incentives."

Lopatin added two more bins near bedrooms on upper levels of the house after a survey he distributed revealed lower recycling rates there.

Some resistance comes from fraternity members who feel like they would be the only one recycling, Kononenko said. He speaks at meetings to encourage the idea that recycling is a group effort.

"You have to ignore the people that just blanket deny it. You expect that those few people that really are into it will help be leaders," Kononenko said. "What we want to do is exercise that middle ground of people that don't really care, to help them understand that recycling is super easy. And as long as you have some basic education, with the whole single-stream system, especially at times like party clean-up, you can literally just deposit all of it into the recycling bin."

In its first semester after signing on to Trust for Cups, Delta Kappa Epsilon saved a little more than $500 on party supplies, and has maintained its 35 percent recycling rate, Lopatin said. Ten out of 12 fraternities GLIST has worked with have successful programs. The group is next tackling energy efficiency, introducing basic energy-saving measures into fraternity houses.

"Sometimes, I think, the issue with recycling is that people don't see the direct impact on their life when they recycle. It's just putting it in the bin that gets picked up and goes somewhere else," Kononenko said. "So what I wanted to do on all these initiatives, this being the first one, is bring it down to a personal level and make it something that you can see that directly benefits you."


Comments

Program gives fraternities discounts on Solo cups if they hit recycling goals

Kerri Jansen
WASTE & RECYCLING NEWS

Published: June 20, 2013 1:12 pm ET
Updated: June 20, 2013 1:14 pm ET

Post Your Comments


Back to story


More stories

Image

Plastic particles showing up in Germany's Lake Constance

October 21, 2014 1:16 pm ET

While Fakuma 2014 exhibitors and visitors occupied themselves with topics like molding of micro-sized plastic parts during the show, the presence of...    More

Image

Bioplastics, design join forces for SOMA

October 21, 2014 11:33 am ET

A polylactic acid made by Germany's Fraunhofer UMSICHT is a key part of the Soma home water filtration system, which its developers call the...    More

Image

Corbion Purac collaboration taking bioplastics into even more uses

October 17, 2014 6:00 am ET

Corbion Purac NV's collaboration with Taiwan-headquartered compounder Supla Co. Ltd. and Taiwan electronics producer Kuender & Co. is paying...    More

Image

Metabolix closing Germany operations

October 16, 2014 2:28 pm ET

Bioplastics maker Metabolix Inc. will end business operations in Germany at the end of 2014, according to documents the company filed with the U.S....    More

Image

New Amcor, Method project taking sustainability to a platinum level

October 16, 2014 11:28 am ET

Amcor Rigid Plastics will have a bottle production operation within a factory which is aiming to be the world's first LEED platinum certified manufact...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events