Phillips 66 limiting polypropylene deliveries

By Frank Esposito
Senior Staff Reporter

Published: July 2, 2013 3:08 pm ET
Updated: July 2, 2013 4:37 pm ET

Related to this story

Topics Materials, Materials Suppliers, Resin Pricing

An already-tight North American polypropylene market has taken one step forward, but two steps back.

Just as Formosa Plastics Corp. USA has exited force majeure conditions for PP at its plant in Point Comfort, Texas, PP maker Pinnacle Polymers has reported production problems at its PP plant in Garyville, La., and Phillips 66 is having problems sourcing propylene feedstock for its PP plant in Linden, N.J.

Livingston, N.J.-based Formosa had been operating under force majeure for less than a month. In a June 11 letter to customers, polyolefins vice president and general manager Ken Mounger said that the firm’s PP units in Point Comfort “have experienced unplanned outages” and was declaring force majeure as a result. No details were provided as to the reasons for the outages.

Garyville-based Pinnacle declared force majeure in late June. Declaring force majeure “will impact our ability to fulfill orders,” Pinnacle President Mark Knorr said in a June 24 letter to customers.

The situation “is the result of an interruption in the normal supply of [propylene] monomer to our plant from multiple sources,” he added. “We are unable to calculate the impact of this interruption at this time.” Pinnacle operates about 800 million pounds of annual PP capacity at its plant.

In Linden, the fatal explosion that closed Williams Cos.’ olefins plant in Geismar, La., now has led Phillips 66 to limit deliveries of polypropylene resin from its PP plant.

In a July 1 letter to customers, Phillips 66 PP and marketing director Greg Osterholt said that his Houston-based firm “is compelled to reduce deliveries of [PP] product at this time.” The firm also will “apportion the material we have available to our customers in a fair and reasonable manner” in order to build inventory in advance of a planned maintenance turnaround. The 45-day turnaround was set to begin on Oct. 1.

Two workers were killed and 76 injured in the June 13 explosion at the Geismar plant operated by Tulsa, Okla.-based Williams. The plant remains closed, and no cause of the explosion has been identified. The plant’s main product was ethylene, with annual capacity of almost 1.4 billion pounds. But it also had annual capacity of 90 million pounds of propylene.

In a June 24 news release, Williams officials said that the explosion originated in the propylene fractionator area of the plant. Several pieces of equipment in the area just adjacent to the propylene fractionator have been seriously damaged and will likely need to be replaced, they added.

Officials also said that “significant amounts” of the electrical power cable and control wiring in the plant will need to be replaced.

The plant was “the principal additional source of [propylene] feedstock for Phillips 66’s Linden site, which is known as the Bayway plant. The plant has annual capacity of about 800 million pounds of PP.

The silver lining to the current PP outages — although PP makers might not agree — is the fact that PP demand in the U.S. and Canada has been soft in early 2013. Through April, demand was down more than 5 percent vs. the same period in 2012, according to the American Chemistry Council in Washington. Stronger demand would have worsened the effects of the outages seen by Formosa, Pinnacle and Phillips 66.


Comments

Phillips 66 limiting polypropylene deliveries

By Frank Esposito
Senior Staff Reporter

Published: July 2, 2013 3:08 pm ET
Updated: July 2, 2013 4:37 pm ET

Post Your Comments


Back to story


More stories

Image

Nova expanding PE research center

August 26, 2014 1:36 pm ET

Nova Chemicals Corp. has broken ground on an expansion of its polyethylene research center in Calgary, Alberta.    More

Image

Sinopec licenses PP technology to USA, posts half-year results

August 26, 2014 11:46 am ET

China's state-owned petrochemical giant Sinopec Corp. said it is licensing polypropylene polymerization technology to a U.S. plant for the first time ...    More

Image

Japan's DIC planning PPS compounding plant in China

August 25, 2014 1:28 pm ET

Japanese materials firm DIC Corp. plans to open its first polyphenylene sulfide (PPS) compounding plant in China by the end of 2015.    More

Image

China's PVC exports face challenges

August 22, 2014 2:14 pm ET

Despite robust growth in the first half of the year, China's PVC exports now faces new challenges, due to trade barriers and new capacity ramping up...    More

Image

Recycled HDPE prices climbing

August 22, 2014 11:26 am ET

North American selling prices for recycled grades of high density polyethylene resin have increased in recent months because of tight supplies of the ...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events