Reifenhäuser to unveil new machine at K 2013

Hamish Champ
PLASTICS & RUBBER WEEKLY

Published: July 4, 2013 11:23 am ET
Updated: July 4, 2013 11:25 am ET

Related to this story

Topics Machinery, K 2013
Companies & Associations Reifenhauser Inc.

DÜSSELDORF, GERMANY – Reifenhäuser GmbH & Co. KG Maschinenfabrik, the German extrusion machinery manufacturer, is to unveil a new machine at this year's K show which it claims will herald a new concept in extruding.

The machine, developed by the group's extrusion technology division, is to remain under wraps until the trade event kicks off in Düsseldorf in October.

However Ulrich Reifenhäuser, the company's managing director, told a press conference at a pre-K show event in the German city this week that the new kit will offer customers better performance and energy savings.

Lower melt temperatures would mean increased output through the new machine, Reifenhäuser said, while a new gear concept would result in lower energy being used.

Other Reifenhäuser developments announced at the pre-K gathering included new technology that allows flattening of blown film "in a more effective and energy-efficient manner than all other systems available on the market".

Reifenhäuser Kiefel Extrusion's 'Evolution Ultra Flat' system sees the flattening unit positioned upstream, between the haul-off nip assembly and turner bar system.

The Troisdorf, Germany-based company said that flattening via stretching was "significantly improved since the melt is still not fully crystallized at this point".

Reifenhäuser said it was also planning to invest 20 million euros in its research and development facility in Troisdorf in time for the K show, a development which will increase its R&D capacity "by about 30 percent."

Speaking about these and other developments which the family-owned firm had been working on and planned to show at the K show later this year, Bernd Reifenhäuser, the firm's chief executive, said the company had "reassessed the art of technology and had the passion and the courage to re-think" what it did.

Part of this process had seen the re-branding of the company's corporate image, a process which had taken four months to bring to the market.

On trading over the past 12 months Bernd Reifenhäuser said the year had been "mixed", with the group unlikely to match the 450 million euro figure which it made in 2011/12.

However the group's on-going operational performance was "positive" and "we are on track", he added.


Comments

Reifenhäuser to unveil new machine at K 2013

Hamish Champ
PLASTICS & RUBBER WEEKLY

Published: July 4, 2013 11:23 am ET
Updated: July 4, 2013 11:25 am ET

Post Your Comments


Back to story


More stories

Image

Sales, orders climbing for Wittmann Battenfeld

October 22, 2014 4:04 pm ET

Equipment maker Wittmann Battenfeld GmbH expects sales this year to increase 7 percent, to 295 million euros, as it said some key markets, including...    More

Image

Asia continues driving sales for Engel

October 21, 2014 2:42 pm ET

The number seven seems to be special for European plastics machinery makers at the moment — injection press giant Engel Holding GmbH said Oct....    More

Image

Trexel charges patent infringement against Taiwan company

October 20, 2014 3:25 pm ET

Trexel Inc., the supplier of the MuCell microcellular foaming technology, is accusing a Taiwanese company, Chuan Lih Fa Machinery Works, of violating ...    More

Image

Humanoid robot provides inspection service with a smile

October 17, 2014 6:00 am ET

Everyone knows robots can improve production and quality. But no one says they can't show a little personality while they're working.    More

Image

Arburg starts taking orders for Freeformer

October 15, 2014 12:52 pm ET

FRIEDRICHSHAFEN, GERMANY — For fans of 3-D printing, Fakuma 2014 marks an important date: Arburg is taking German orders for the Freeformer.    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events