Hong Kong recycler sees pyrolysis as hedge against China's 'green fence'

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: July 11, 2013 1:42 pm ET
Updated: July 11, 2013 1:46 pm ET

Related to this story

Topics Sustainability, Public Policy, Recycling

While China's "green fence" crackdown on recycled material imports has caused some painful adjustments for recyclers, one Hong Kong company is suggesting some relief could come from building a pyrolysis factory to convert plastic waste to fuel oil.

Hong Kong Telford Envirotech Group Ltd., which has three plastics recycling plants in Hong Kong and two in neighboring Guangdong province in China, is proposing to build the pyrolysis plant, which would have an initial capacity of processing 7,200 metric tons of waste plastic annually.

It would start operations in 2015 in Hong Kong's Tuen Mun section, according to an application Telford filed with local government officials.

The company sees it partly as a hedge against recent restrictions on waste material imports into China — including the so-called "green fence" crackdown that began in February, said Joanne Lee, project manager for Telford, in a July 11 interview with Plastics News.

Those February restrictions, which are in many ways the toughest yet in China, have had an impact broadly on Hong Kong's plastics recyclers.

One Hong Kong recycling industry trade group said earlier this month that an estimated 10,000 metric tons of waste plastic that in the past would have been sent to China for recycling has instead been landfilled in Hong Kong.

Officials with the Federation of Hong Kong Recycle told the South China Morning Post newspaper that Hong Kong plastic recycling companies are losing on average HK$200,000 (US$25,800) to HK$300,000 (US$38,700) per month because of the new policy.

Hong Kong, a semi-autonomous Chinese territory of 7 million people, lacks enough of its own capacity to process the materials, the group said.

Lee said Telford believes its pyrolysis plant can make Hong Kong less dependent on mainland China and other markets for its waste plastics.

Lee said even before the "green fence" restrictions, mainland Chinese government officials would once or twice a year implement new policies that would make it more difficult to bring in waste materials, even for companies like Telford that have proper licenses.

She said the company would likely send lower-value materials like low density polyethylene bags or PVC to the waste-to-fuel plant, but continue to recycle higher-value materials like PET bottles.

She said the material that's now being thrown away in Hong Kong is probably lower-quality plastic: "If the 10,000 tons is PET bottles, it would not be thrown into the landfill."

Telford could eventually triple the capacity of the pyrolysis plant, Lee said. Initially, the operation would produce up to 4,300 metric tons of fuel oil a year.

The company is proposing building the facility at an industrial park for environmentally oriented businesses in Tuen Mun, where the company already has an existing plastics recycling operation.

The project is currently undergoing an environmental assessment, Lee said.

Beyond the new restrictions from mainland China, Hong Kong also faces home grown pressures on waste issues. The territory's environmental protection department says that its three landfills will run out of space in the next six years.

In Telford's initial proposal to the Hong Kong government in January, it said the plant could also help Hong Kong more broadly meet its waste reduction goals, including further developing its local recycling industry.


Comments

Hong Kong recycler sees pyrolysis as hedge against China's 'green fence'

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: July 11, 2013 1:42 pm ET
Updated: July 11, 2013 1:46 pm ET

Post Your Comments


Back to story


More stories

Image

FTC warns bag makers to take care before making biodegradeability claims

October 23, 2014 12:30 pm ET

Makers of oxodegradable or oxo-biodegradable plastic bags should consider themselves on notice, according to the U.S. Federal Trade Commission.    More

Image

Packaging specialist Amcor hits sustainability goals ahead of schedule

October 23, 2014 11:15 am ET

Global packaging company Amcor Ltd. has achieved its waste reduction goals two years ahead of schedule, according to the company's new sustainability ...    More

Image

Simple lightweighting in packaging, caps not so simple anymore

October 22, 2014 4:16 pm ET

The days of finding simple ways to remove additional weight — and costs — from plastic bottles are over, according to one expert.    More

Image

Unilever uses foaming in new bottle

October 22, 2014 1:35 pm ET

Foaming is a good alternative to thin-walling for reducing plastic use in consumer goods packaging, according to a Unilever plastics expert.    More

Image

Bioplastics, design join forces for SOMA

October 21, 2014 11:33 am ET

A polylactic acid made by Germany's Fraunhofer UMSICHT is a key part of the Soma home water filtration system, which its developers call the “fi...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events