Haitian to introduce Venus II and Jupiter II machines

By Bill Bregar
Senior Staff Reporter

Published: July 17, 2013 3:20 pm ET
Updated: July 23, 2013 12:33 pm ET

Related to this story

Topics Product News, K 2013

The Chinese injection giant Haitian International Holdings Ltd. once again will have the solar system covered at K 2013.

Haitian will roll out a bunch of machinery news: the Venus II series, now available in four new clamping forces up to 550 metric tons and the Jupiter II series of two-platen machines, with the world premier of the 550-tonne size.

All together, Haitian will mold parts on four live exhibits.

A high-speed version of the Venus II will mold coffee stir sticks on a 24-cavity mold at a cycle time of 2.9 seconds.

The Jupiter II will turn out engine covers on a two-cavity mold every 43 seconds. The drive system has a direct connection between the servo motor and the gear pump, to precisely regulate rotational speed and extremely fast response times. Haitian plans to introduce other smaller-tonnage Jupiters in 2014. The company shipped more than 100 Jupiter II presses to customers in China after the first few months of 2014.

The Ningbo-based company also will show a Zhafir Mercury press running cable ties on an eight-cavity mold. The side plates turn into tie bars to achieve 70 percent mold surface. The machine design is about 30 percent slimmer.’

Finally, the Mars II eco series, sporting a servo-hydraulic drive, will mold a transparent case on a 24-second cycle.

Haitian’s North American operation, Absolute Haitian Corp. is in Worcester, Mass.

Tel. 508-459-5372, email gfrohring@absolutehaitian.com.


Comments

Haitian to introduce Venus II and Jupiter II machines

By Bill Bregar
Senior Staff Reporter

Published: July 17, 2013 3:20 pm ET
Updated: July 23, 2013 12:33 pm ET

Post Your Comments


Back to story


More stories

Extruder maker touts advantages of modular design

April 9, 2014 11:46 am ET

KraussMaffei Berstorff extends its line of compounding extruders with the cost-effective ModulPlus variety.    More

Profile extrusion system saves material and energy

April 9, 2014 11:39 am ET

Profile extrusion technology supplier Greiner Extrusion of Nussbach, Austria, has a new innovation: Its flow.control pro using GESS.tronic, which...    More

Structural foam retrofit includes sequential valve gating

April 9, 2014 11:21 am ET

Cincinnati Process Technologies did a controls retrofit project for a structural foam molding machine for Buckhorn Inc.’s factory in Bluffton,...    More

Software helps Schnipke speed up mold trials

April 9, 2014 11:20 am ET

Schnipke Engraving Co. of Ottoville, Ohio, has seen a major improvement in speed in its design-to-part process by using the Sigmasoft thermoplastic...    More

Mold with five-piece collapsing core makes cosmetic jars

April 9, 2014 11:18 am ET

StackTeck Systems Ltd. of Brampton, Ontario, has announced a new application for its five-piece collapsing core for high-volume jars: with a mold sold...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events