Haitian to introduce Venus II and Jupiter II machines

By Bill Bregar
Senior Staff Reporter

Published: July 17, 2013 3:20 pm ET
Updated: July 23, 2013 12:33 pm ET

Related to this story

Topics Product News, K 2013

The Chinese injection giant Haitian International Holdings Ltd. once again will have the solar system covered at K 2013.

Haitian will roll out a bunch of machinery news: the Venus II series, now available in four new clamping forces up to 550 metric tons and the Jupiter II series of two-platen machines, with the world premier of the 550-tonne size.

All together, Haitian will mold parts on four live exhibits.

A high-speed version of the Venus II will mold coffee stir sticks on a 24-cavity mold at a cycle time of 2.9 seconds.

The Jupiter II will turn out engine covers on a two-cavity mold every 43 seconds. The drive system has a direct connection between the servo motor and the gear pump, to precisely regulate rotational speed and extremely fast response times. Haitian plans to introduce other smaller-tonnage Jupiters in 2014. The company shipped more than 100 Jupiter II presses to customers in China after the first few months of 2014.

The Ningbo-based company also will show a Zhafir Mercury press running cable ties on an eight-cavity mold. The side plates turn into tie bars to achieve 70 percent mold surface. The machine design is about 30 percent slimmer.’

Finally, the Mars II eco series, sporting a servo-hydraulic drive, will mold a transparent case on a 24-second cycle.

Haitian’s North American operation, Absolute Haitian Corp. is in Worcester, Mass.

Tel. 508-459-5372, email gfrohring@absolutehaitian.com.


Comments

Haitian to introduce Venus II and Jupiter II machines

By Bill Bregar
Senior Staff Reporter

Published: July 17, 2013 3:20 pm ET
Updated: July 23, 2013 12:33 pm ET

Post Your Comments


Back to story


More stories

Image

Materials companies introduce a range of new products at Fakuma

October 22, 2014 11:29 am ET

DuPont Co. led a parade of materials firms with new products at Fakuma 2014.    More

Negri Bossi shows energy saving systems

October 22, 2014 11:21 am ET

Negri Bossi SpA showed two 210T injection molding machines at Fakuma in Friedrichshafen, Germany, with the SmartEnergy device for energy saving. Both ...    More

Priamus promises extended life for in-mold sensor

October 22, 2014 11:11 am ET

Priamus System Technologies AG has developed an in-mold sensor made of an extremely hard and chemically resistant material, extending the life of the ...    More

Erema in-house recycling event Oct. 29 in Austria

October 22, 2014 11:08 am ET

Erema Engineering Recycling Maschinen und Anlagen GmbH will hold an in-house recycling event, Discovery Day 2014, at its headquarters in Ansfelden,...    More

NGR system designed to recycle bulky or thick-walled plastic parts

October 22, 2014 11:04 am ET

NGR Next Generation Recyclingmaschinen GmbH demonstrated its A:GRAN-series systems to recycle bulky or thick-walled plastic parts at Fakuma in Friedr...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events