Sepro to show 23 robots at K 2013

By Bill Bregar
Senior Staff Reporter

Published: July 17, 2013 3:13 pm ET
Updated: July 17, 2013 3:14 pm ET

Related to this story

Topics Product News, K 2013

French robot maker Sepro Robotique’s K 2013 stand will be jam-packed with 23 robots, with another six on booths of partner companies.

The display will be the largest every for Sepro. Sepro’s K show motto is “Your Free Choice in Robots,” which refers top Sepro’s global reach and combination of Cartesian beam robots and articulating-arm robots, developed together with Stäubli Robotics.

Here is a sampling:

  • Two six-axis articulating-arm robots will operate together with three five-axis Cartesian robots. The five-axis 5X line is based on Sepro three-axis beam robots and a two-axis Stäubli servo wrist. The 6X Visual line of robots combines a Stäubli six-axis articulating robot with an eaty-to-use Sepro Visual 3 controller.
  • Sepro Multi-Inject 20 robot, shown for the first time at K, will operate on a multi-material, in-mold labeling application with a Sumitomo press with 210 metric tons of clamping force, molding ice scrapers with a soft-touch grip.
  • An s5-15 axial robot will run insert molding on a 60-tonne Arburg press. The robot, to be set up so the horizontal beam runs parallel to the injection unit, will produce a toy car with wheels and metal axles.
  • Also, four Sepro robots will run on the Sumitomo Demag stand. The Haitian Plastics Machinery exhibit will run three more Sepro robots. The company’s automation also wioll be shown at Romi Sandretto, Billion and JSW Windsor.

Sepro CEO Jean-Machel Renaudeau said the company’s product line is almost entirely new since the 2010 K show. Much of the new lineup was introduced within the last 13 months.

Sepro is based in La Roche-sur-Yon, France. Sepro America LLC is in Pittsburgh.

Tel. 412-459-0452, email jhealy@seproamerica.com.


Comments

Sepro to show 23 robots at K 2013

By Bill Bregar
Senior Staff Reporter

Published: July 17, 2013 3:13 pm ET
Updated: July 17, 2013 3:14 pm ET

Post Your Comments


Back to story


More stories

Image

Five-axis flexibility paying off for Sepro and its customers

October 29, 2014 1:47 pm ET

French robot maker Sepro Robotique expects to generate 78 million euros ($99 million) in 2014 sales — 17 percent more than 2013 — as...    More

Image

Biodegradable flame retardant shows promise

October 22, 2014 9:15 am ET

Deflamo AB reports successful test results in vinyl wall coverings for a biodegradable flame retardant.    More

Image

Materials companies introduce a range of new products at Fakuma

October 22, 2014 11:29 am ET

DuPont Co. led a parade of materials firms with new products at Fakuma 2014.    More

Negri Bossi shows energy saving systems

October 22, 2014 11:21 am ET

Negri Bossi SpA showed two 210T injection molding machines at Fakuma in Friedrichshafen, Germany, with the SmartEnergy device for energy saving. Both ...    More

Priamus promises extended life for in-mold sensor

October 22, 2014 11:11 am ET

Priamus System Technologies AG has developed an in-mold sensor made of an extremely hard and chemically resistant material, extending the life of the ...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events