Collaborative robots offer advances in automation

By Frank Antosiewicz
Correspondent

Published: July 22, 2013 3:06 pm ET
Updated: July 22, 2013 3:18 pm ET

Image By: Frank Antosiewicz Rethink Robotics' Baxter being trained in a pickup task by Gibson Engineering's Harley Green, a project specialist

Related to this story

Topics Machinery

WEST SPRINGFIELD, MASS. — The collaborative robot — a robot able to work freely around humans — is touted by its supporters as an attractive automation option for small manufacturers.

Two quite different machines, but both part of the collaborative class, were on display at the recent Eastec trade show, sponsored by the Society of Manufacturing Engineers in Springfield.

Learning to train Baxter

At the Gibson Engineering Co. Inc. booth, the Baxter robot was lifting circular plastic parts off a conveyor and placing them in a box.

What was intriguing was that programming was done by grabbing Baxter's arm and showing "him" the task to be performed.

"Instead of programming it, you grab and teach it how," said Robert MacDonald, director of sales and marketing for Gibson Engineering of Norwood, Mass., a Rethink distributor for New England, northern New Jersey and metro New York.

Baxter uses a camera to track a product on a conveyor, then picks it up and places it in a box. He said that it works with a piece that is 5 pounds or less, and that it takes about a half hour for setup and instruction of its use.

"A lot of times when we bring Baxter to a customer. It is not programming, but it is really teaching and we get the operators to do it," said MacDonald.

Harley Green, Gibson project specialist for Baxter, works each day with the robot, and notes that it is a continuing process. Each update allows it to do more. He said that Baxter draws interest in many different sectors, ranging from manufacturing to handling money for investment companies and banks.

Baxter was developed by Rethink Robotics Inc. Mitch Rosenberg, the company's vice president of marketing and product management, said a number of plastic manufacturers and medical equipment companies have purchased a Baxter.

Universal Robots' arm does repetitive tasks

Axis New England of Danvers, Mass., was showcasing a sorting and testing setup with the Universal Robots' arm placing wooden blocks in boxes. It also did not need an enclosure and is able to work alongside an operator.

Ed Mullen, national sales manager, said the robotic arm, which is made in Denmark, has generated a lot of interest.

He said its low cost allows for small- and medium-sized manufacturers to use more automation.

He said the Danish facility is turning out about 100 machines a month and that growth has tripled every year in the last four years.

Mullen said that a big difference from traditional robots is the cost of training and programming. This flexible unit can be programmed quickly and reprogrammed again when the product use changes. It is all done through a graphical user interface.

In injection molding, it can be used for packaging tasks as well as to trim flashing off finished products.


Comments

Collaborative robots offer advances in automation

By Frank Antosiewicz
Correspondent

Published: July 22, 2013 3:06 pm ET
Updated: July 22, 2013 3:18 pm ET

Post Your Comments


Back to story


More stories

Image

Sales, orders climbing for Wittmann Battenfeld

October 22, 2014 4:04 pm ET

Equipment maker Wittmann Battenfeld GmbH expects sales this year to increase 7 percent, to 295 million euros, as it said some key markets, including...    More

Image

Asia continues driving sales for Engel

October 21, 2014 2:42 pm ET

The number seven seems to be special for European plastics machinery makers at the moment — injection press giant Engel Holding GmbH said Oct....    More

Image

Trexel charges patent infringement against Taiwan company

October 20, 2014 3:25 pm ET

Trexel Inc., the supplier of the MuCell microcellular foaming technology, is accusing a Taiwanese company, Chuan Lih Fa Machinery Works, of violating ...    More

Image

Humanoid robot provides inspection service with a smile

October 17, 2014 6:00 am ET

Everyone knows robots can improve production and quality. But no one says they can't show a little personality while they're working.    More

Image

Arburg starts taking orders for Freeformer

October 15, 2014 12:52 pm ET

FRIEDRICHSHAFEN, GERMANY — For fans of 3-D printing, Fakuma 2014 marks an important date: Arburg is taking German orders for the Freeformer.    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events