Coffee roaster says OneCoffee cup is partially compostable

Published: July 25, 2013 3:15 pm ET
Updated: August 7, 2013 1:53 pm ET

Image By: Canterbury Coffee Corp. Canterbury Coffee Corp. says it has developed a biodegradable equivalent to Keurig Inc.'s K-Cup

Related to this story

Topics Sustainability, Packaging

A Canadian coffee company is working to make single-serve brewing better for the environment.

Canterbury Coffee Corp., a specialty coffee roaster based in Richmond, British Columbia, says it has developed a compostable and biodegradable equivalent product to Keurig Inc.'s K-Cup.

Canterbury's OneCoffee version of a K-cup is a "trifecta of sustainability," senior marketing manager Derek Perkins said in a phone interview.

The original K-Cup is a trademark of single-serve coffee giant Keurig Inc. of Reading, Mass.

Canterbury's single-serve cup is made with 40 percent less plastic — it doesn't have a hard shell like traditional K-Cups — and the hard plastic ring uses a support structure that will compost in an anaerobic environment.

Canterbury lauched the compostable, biodegradable cups as part of its new organic, single-serve coffee, branded OneCoffee. The coffee itself is fair trade and organic, and the entire product is packaged in a paperboard box with zero-carbon offsets, Perkins said.

There are "literally billions of these traditional K-Cups in landfills already," he said.

The OneCoffee cup, however, is made of PLA-based resin from DaniMer Scientific LLC. The resin itself meets ASTM degradability standards and is "OK-compost" certified by AIB-Vincotte International SA, according to Bainbridge, Ga,-based DaniMer.

The cups are assembled and filled in-house by Canterbury. Perkins would not disclose the company's suppliers.

According to Canterbury, the cup's entire structure is about 92 percent biodegradable. The only exception is the filter, made with a nylon weave to withstand the brewing process.

The company is hoping to make the filter mesh with a biodegradable nylon alternative, like polyethylene furanoate, in the near future, Perkins said.

The company is also searching for a biodegradable alternative to the plastic aromatic overwrap the cups are packaged in, he said.

In the next few years, the OneCoffee cup will be 98 percent biodegradable, he said.

"Look at how far things have come even in the last five years in bioplastics," he said. "There have been some amazing things that we didn't even think possible. I'm hopeful."

In the last year, single-cup brewers have exploded in popularity. About 13 percent of Americans drank coffee made in a single-cup brewer yesterday, up from 4 percent in 2010, according to data from the National Coffee Association. About 12 percent of Americans own a single-cup brewer, according to the same study.

Despite their growing popularity, K-Cups struggle with sustainability.

The cups, made from a combination of plastic, paper, metal and organic material (coffee or tea), aren't recyclable in a typical waste stream.

Keurig, a subsidiary of Green Mountain Coffee Roasters Inc., has been searching for a way to combat claims of unsustainability. In 2011, the company started a pilot-scale take-back program for corporate customers, where coffee grounds are sent to a compost facility and the rest of the materials incinerated in a waste-to-energy plant. The company also sells a refillable K-Cup filter.

But K-Cups are convenient, a feature Canterbury tried to harness when designing its OneCoffee brand.

"We wanted it to be really easy for people — just throw it in your garbage and not worry about it," Perkins said.

Consumers don't have to clean or disassemble the cups, just throw them away. The cups will break down in an industrial composter — the first step for most garbage collected in Canada's municipal waste streams — or in a regular landfill environment, Perkins said.

The cups degrade in an anaerobic environment; they don't need to be exposed to sunlight or air, just moisture, he added.

How long the cup will take to break down depends on how the product is treated. The longer it spends in an industrial compacter, the faster it will break down, Perkins said.

The cups are not certified as OK to compost at home — it wouldn't be a great idea to throw them in your garden or backyard composter, because the filter wouldn't biodegrade, Perkins said.

The OneCoffee launched in Canada earlier this month. Canterbury has been fielding lots of calls from companies looking to carry the product in their stories, he said. The product appeals to specialty grocery chains, such as Whole Foods Market Inc. and Trader Joe's, that are wary of the waste caused by traditional K-Cups, he added.

OneCoffee isn't currently available in the U.S., but the product does meet the stricter "Green Guide" requirements, Perkins said.

Green Guides, the U.S. Federal Trade Commission's Guides for the Use of Environmental Marketing Claims, regulates the types of environmental claims a company can make about its products. Marketers must clarify if a product cannot be composted at home. To claim a product is bio¬degradable, a firm must prove that it can break down and return to nature within a year. A product cannot make unqualified claims of degradability if it's destined for a landfill, incinerator or recycling center, according to FTC.

Because California has strict restrictions on products claiming biodegradability, the product might have to be advertised as compostable instead of biodegradable in that state, Perkins said.

Canterbury Coffee may have the first biodegradable single- serve cup, but other companies have also developed sustainable single-serve coffee.

Swiss Coffee Co. AG began selling single-serve coffee in a compostable plastic capsule for its Beanarella brewer in 2012. The injection molded capsules, available in Switzerland, are made with a certified biodegradable and compostable resin from BASF SE.

The single-serve brewing system — a coffee capsule and aroma-tight outer package — are made with BASF's Ecovio resin. The product "fulfills the demanding requirements for protecting the product and brewing coffee in high-pressure coffee machines, yet may still be composted," according to a BASF news release.

Sustainable single-serve coffee is an ongoing trend. You'll see more and more sustainable versions of the single-serve cup coming into the market, Perkins said.

People are concerned about the waste created by single-serve cups; waste is probably the biggest barrier and biggest obstacle to purchasing a compatible brewer, he said. Products like OneCoffee give consumers the opportunity for a nice indulgence without a detrimental impact, according to Perkins.

"I think at some point it's going to become the standard that there's an efficient or sustainable package as often as possible," he said.


Comments

Coffee roaster says OneCoffee cup is partially compostable

Published: July 25, 2013 3:15 pm ET
Updated: August 7, 2013 1:53 pm ET

Post Your Comments


Back to story


More stories

Image

SPI hopes to build on EPS recycling

November 26, 2014 6:00 am ET

Successfully recycling expanded polystyrene can be a challenge, there's no doubt about that. EPS, however, has value, is in demand and deserves to be ...    More

Image

Pan-European plastics recycling show scheduled for 2015

November 26, 2014 6:00 am ET

Europe is to get its first pan-European exhibition and conference aimed at the region's plastics recycling industry next year.    More

Image

Plastics News Now: Recycling machine dispenses food for stray dogs, cats

November 26, 2014 6:00 am ET

A PET bottle recycling vending machine is providing food and water for stray dogs and cats, a plastic tire is looking to replace rubber pneumatic...    More

Image

Irish packaging group Smurfit Kappa opens film plant in Spain

November 26, 2014 6:00 am ET

Global packaging group Smurfit Kappa Group plc has responded to growing demand for its bag-in-box liquid container/dispensers by opening a new plant...    More

Image

Globalization brings sizable growth, primarily in Asia

November 25, 2014 1:40 pm ET

In 1990, the year after Plastics News published our first issue, there were 33,000 injection molding machines sold worldwide. Fast forward to 2013, an...    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events