Firms push use of fiberglass lineals

By Michael Lauzon
Correspondent

Published: August 1, 2013 1:39 pm ET
Updated: August 1, 2013 1:42 pm ET

Image By: Diversified Lineal Systems Diversified Lineal Systems' pultruded fiberglass profiles

Related to this story

Topics Construction, Windows & doors, Pultrusion

Diversified Lineal Systems is making it easy for window and door assemblers to adopt pultruded fiberglass profiles as the supporting material.

Diversified Lineal is qualified as a supplier of fiberglass lineals by the American Architectural Manufacturers Association of Schaumburg, Ill. This means window and door firms can expect their products to meet building standards when they source fiberglass profiles from Diversified Lineal, Mark Back, the firm's director of operations, said in a telephone interview.

Since 1936, AAMA has been an advocacy agency for the fenestration industry and offers product certification, training and other services. Diversified Lineal's fiberglass profiles also are rated by the National Fenestration Rating Council of Greenbelt, Md.

Back said his company in Erlanger, Ky., provides technical support, training and marketing assistance to companies wanting to used fiberglass lineals in their products.

"Companies can go to us to get the whole system," Back explained. "We design production using tested and certified lineals."

Back said it is costly for an entrant in the fiberglass fenestration market to pay for product development, pultrusion dies and tests for certification.

One of the first companies to sign up with Diversified Lineal's turnkey package is Gilkey Window Co.

Gilkey Window is ramping up fiberglass window production and expects to have a good idea of market acceptance in September. In the early going it seems "to be working pretty good," owner Mike Gilkey said in a telephone interview.

"Basically fiberglass is a great fenestration material and this helps us with both the product's design and its performance," Gilkey said.

"The big advantages are strength and stability," he said.

Strength means the window frame can be slimmer, letting in more daylight. The slim look also mimics the originally installed windows.

"This is very important in a residential replacement window installation, where the homeowner may not want to advertise that he has 'replacement' windows," Gilkey said.

Stability is important because the more a material expands and contracts, the more the sealants will crack and leak, he added.

"We will strategically use fiberglass, where people will pay for a better-looking window," Gilkey said.

The extra retail price, about $700 for a fiberglass window vs. about $600 for vinyl, might not suit everyone's budget. Gilkey Window also offers vinyl, aluminum and wood windows.

With Diversified's support, Gilkey Window can be certified by AAMA. Gilkey Window pays Diversified Lineal a fee to have the test results put in its name.

Back said his company is investing multimillion dollars in expansion for its push in fiberglass window and door lineals.

"We have added more pultrusion machines for this [fenestration] market," Back said.

The expansion also involved adding a new paint line.

Diversified Lineal publicly announced its new turnkey service at the International Bulders' Show, held Jan. 22-24 in Las Vegas. The company began talks with Gilkey Window about a month earlier, Back recalled.

Diversified Lineal is a division of Diversified Structural Composites Inc. The parent company has been providing fiberglass lineals for years but the launch of the new division is a strategic move into the fenestration market.

Back said the window and door production market is highly fragmented. Large companies such as Andersen Corp. of Bayport, Minn., and Marwin Windows and Doors of Warroad, Minn., only hold 20-25 percent of the U.S. market, he estimated.

Such fragmentation makes it hard for a fenestration producer to get into a new raw material like fiberglass and Diversified Lineal saw an opportunity to meet market needs.

Diversified Structural's predecessor company, Diversified Fabricators, was established in 1978. In early days it focused on technical carbon/epoxy products. The firm still works with carbon- fiber-reinforced resins and other systems in pultrusion and other processes. It can choose other specialty reinforcements — aramid, quartz, S-glass — for unusual applications. It has the capability to selectively place reinforcement in the pultrusion, as it does with braided reinforcements.

Diversified Structural works with polyester thermosets, vinyl ester, epoxy, urethanes and other resin systems. It can make rods as thin as 0.011 inch and panels of up to 250 pounds. Its value-added services include machining, thermoplastic coating, assembly and painting.

Mainstay jobs include spars, ski poles and hobby components. New from Diversified Structural is a sound wall for highways that allows longer spans with lower weight, high strength, corrosion resistance and a lower per-job cost.

Back said pultruded fiberglass has advantages in windows and doors, combining desirable properties of vinyl and aluminum. It has structural strength approaches aluminum and it can take dark colors like metal. Its thermal properties are close to vinyl and its coefficient of expansion is equal to that of glass, a boon to structural integrity.

Back said Diversified Lineal will launch a product line in September targeting production of a full fiberglass sliding patio door system. The company plans to exhibit at the GlassBuild America trade show, scheduled for Sept. 10-12 in Atlanta.

Fiberglass windows are a small part of the market but are gaining traction. They once held about 2 percent of the U.S. window market but have grown to a 3.2 percent share recently, according to a study by AAMA and the Window and Door Manufacturers Association of Washington.

One observer feels commercial buildings could be a good growth area for fiberglass windows because the material's insulative ability, like vinyl, surpasses aluminum.

"Energy efficiency is more important in the commercial market, where engineers look to every part of a building for savings," according to Steve Van Kouteren, business director of reports for research firm Principia Partners LLC of New York.

Fiberglass windows might gain wider acceptance with the entry into the U.S. market by international building materials conglomerate James Hardie Industries plc. In April 2012 James Hardie bought the profile pultrusion business of Teel Plastics Inc. James Hardie renamed the pultrusion business in Baraboo, Wis., Razor Composites LLC. James Hardie, big in cement/fiber building materials made the move to diversify. James Hardie is based in Dublin and has management offices in Sydney. Its North American base is in Mission Viejo, Calif.

Diversified Structural is a subsidiary of Japanese conglomerate Teijiin Ltd. of Tokyo. Overall Diversified Structural runs more than 20 pultrusion lines.


Comments

Firms push use of fiberglass lineals

By Michael Lauzon
Correspondent

Published: August 1, 2013 1:39 pm ET
Updated: August 1, 2013 1:42 pm ET

Post Your Comments


Back to story


More stories

Image

Berry's rebranded Blue Clover expands packaging design reach

January 23, 2015 1:59 pm ET

As design director of Berry Plastics Corp.'s rebranded packaging design studio, Scott Fisher believes the new name of Blue Clover Studios cuts the...    More

Image

Plastics News Now: Plastic helps create smart surfaces in cars

January 22, 2015 6:00 am ET

We check out how plastic is helping lead innovation inside vehicles, a packaging maker is investing in equipment and the "New American Home" features ...    More

Image

Hart takes hands-on approach

January 21, 2015 11:06 am ET

When Melanie Hart walks the floor of one of her plants, she solves problems.    More

Image

New Vinyl Building Council leader out to build on grassroots efforts

January 20, 2015 12:54 pm ET

As the new executive director of the Vinyl Building Council, Kevin Koonce will oversee advocacy for the most-used plastic in building and...    More

Image

Housing forecast predicts strong growth, demand for decks, doors, windows

January 20, 2015 4:59 pm ET

Demand for new single-family homes is projected to increase by as much as 26 percent in 2015, and if it does, building material makers will be supplyi...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events