Survey: Fuel efficiency a top concern of automotive engineers

By Rhoda Miel
News Editor

Published: August 7, 2013 9:30 am ET
Updated: August 7, 2013 4:52 pm ET

Related to this story

Topics Automotive, Industry Trends
Companies & Associations DuPont Co.

TRAVERSE CITY, MICH. — The last time the auto industry took on fuel economy, it was because of an oil embargo that prompted lines at gasoline stations, higher prices and the first Corporate Average Fuel Economy requirements in the U.S.

That was in the 1970s.

Now, there is no immediate sign that oil prices are going to surge anytime soon, but government regulations across the globe are ensuring the industry will take fuel economy very seriously — and almost no one expects those regulations will ease up.

In its annual survey of auto industry insiders, DuPont Co. and WardsAuto found that only 8 percent of the respondents expected regulations would relax, compared to nearly half — 47 percent — anticipating requirements would strengthen further.

The survey, released Aug. 7 during the Center for Automotive Research's Management Briefing Seminars in Traverse City, was conducted by Paramount Research for DuPont and WardsAuto, with 1,300 responses. About half of those people participating are in engineering or research and development.

In the U.S., automakers are working toward a CAFE standard of 54.5 miles per gallon by 2025, while the European Union is looking at more stringent carbon dioxide standards for 2020 — although the EU recently delayed a vote to adopt those standards.

Those regulations will be the biggest driver in fuel performance and clean technology demands over the coming decades, noted Kevin Layden, director of electrified powertrain engineering for Ford Motor Co. of Dearborn, Mich.

"You must reduce your [emissions] output," added Bob Lee, vice president and head of the engine, powertrain and electrified propulsion systems engineering for Chrysler Group LLC of Auburn Hills, Mich. "It doesn't matter if you're in Europe, in China, in the U.S. or South America."

More than 60 percent of survey participants said that lighter weight has gained value in automotive business discussions since 2011, while plastics is gaining potential as a future alternative material to meet lighter weight goals.

In past surveys, aluminum led the list of materials expected to help meet fuel economy standards. For 2013, aluminum tied with engineering plastics.

On a five-point scale asking which materials would be more useful in meeting fuel economy requirements, both aluminum and engineering plastics scored 4.2, with advanced composites just behind at 4.1.

"Development activity with automakers is intensifying, especially related to new composite and multi-material solutions that deliver the strength and stiffness needed for performance and safety," said Mike Day, DuPont automotive Performance Polymers development director in North America.


Comments

Survey: Fuel efficiency a top concern of automotive engineers

By Rhoda Miel
News Editor

Published: August 7, 2013 9:30 am ET
Updated: August 7, 2013 4:52 pm ET

Post Your Comments


Back to story


More stories

Image

Cooper-Standard JV to focus on Asia

August 20, 2014 10:17 am ET

Cooper Standard Automotive Inc. is forming Cooper Standard Inoac Pte. Ltd. — a joint venture with Inoac Corp. of Japan — to expand the...    More

Image

Ohio molder sold to private equity firm

August 19, 2014 5:23 pm ET

Private equity firm TVV Capital of Nashville has acquired injection molder Design Molded Plastics Inc. for an undisclosed price.    More

Image

Germany's Bolta building $50 million plating plant in Alabama

August 19, 2014 2:21 pm ET

A German company is setting up a plastics chrome plating plant in Tuscaloosa, Ala.    More

Image

Soaring business leads to growth for Composites Horizons

August 19, 2014 1:56 pm ET

Composites Horizons LLC is investing $12 million in new equipment and processes, in part for ceramic matrix composite production in its fourth...    More

Image

RTP expands very long fiber thermoplastic production to Mexico

August 19, 2014 9:47 am ET

RTP Co. has introduced very long fiber reinforced compounds at its Monterrey, Mexico, facility.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events