Evildoers abound, in 3-D APET comics

By Frank Esposito
Senior Staff Reporter

Published: August 16, 2013 4:01 pm ET
Updated: August 16, 2013 4:10 pm ET

3-D APET comics

Image By: DC Entertainment image Supervillain Relic, having enchained Green Lantern, is ready to wreak havoc on the world.

Related to this story

Topics Consumer Products

BROOKFIELD, WIS. — Can the power of plastics stop the world's worst supervillains?

Comics fans will find out in September, when DC Comics releases 52 special issues featuring lenticular 3-D motion covers made of amorphous PET film. The issues are part of DC's Villain Month promotion, in which the bad guys take over the good guys' comics.

(The Joker takes over Batman, Bizarro is featured in Superman, Darkseid dominates the Justice League. … How will our heroes prevail?)

"We look for an opportunity every year in September to do something big that really redefines the line and invites anyone who hasn't been following comics to step right in," DC Entertainment co-publisher Jim Lee said in an interview with Buzzfeed.com.

The covers will be the first commercial products made using a 200-line lenticular lens designed by National Graphics Inc. of Brookfield. The covers will be printed in China before being sent to Canada to be placed around the comics, National Graphics spokeswoman Devonne O'Gorman said in a recent phone interview.

Despite the line using six to eight layers of images, the plastic covers won't be much thicker than typical cover stock, she explained. When viewed from different angles, the covers will give the appearance of depth and movement.

"We're really excited about the DC project," O'Gorman said. "This is a great way to launch our 200-line level of detail."

Typically, a lenticular item might have 100 lines of detail, although some previously went as high as 150. And while the DC covers max out at eight layers, as many as 12 can be used at once with the new technology.

The lenticular process often is used in advertisements or on cups or promotional items.

"The lenticular look grabs the attention of anyone who sees it," O'Gorman added.

DC Entertainment co-publisher Dan DiDio described the covers' appearance as "an incredible 3-D effect that shows depth of field."

"It's the full cover stock, so it's not anything that has been glued on," he said. "More importantly, it's actually pliable and soft to the touch. It's a brand-new technology and we're going to be the first ones debuting in this fashion."

"They're amazing covers," DC's Lee added. "Any time in the past that [a comics company] has done specialty covers, you would only get like a small, trading-card-size image on the cover that was a hologram or lenticular bit of technology."

"This is the whole cover and it's amazing," he added. "Let's say the Joker is taking over. It'll be the Batman title in the background, and you'll see the Joker title splattered on top of the Batman logo itself."

"It really sells the concept in a very visual way."

The first wave of issues with the amorphous PET covers will arrive in comic shops Sept. 4. Lenticular covers coming out that week include issues of Superman, Batman, Justice League, Flash, Green Lantern and Green Arrow. Other titles receiving the lenticular treatment by the end of the month include Aquaman, Teen Titans and Swamp Thing.

Some comics are receiving several lenticular covers. Multiple issues of Superman, Batman and a few other titles will be published in September.

National Graphics bills itself as the world leader in lenticular technology. The firm was founded in 1976 by Donald Krause to produce color separations for local printers in the Milwaukee area. In the mid-1990s, the firm's engineering and development team created its patented Extreme Vision software. National then made the move from color separations to lenticular production.

DC's Villain Month promotion also should benefit from the success of Man of Steel, the blockbuster Superman film that through July 22 had registered more than $635 million in global box office revenue.

But bad guys seem to have their own special kind of appeal.

"One of the strengths of the DC Universe has been the strength of the rogues' gallery," DiDio said. "Often times they're as famous — if not more infamous — than our heroes."


Comments

Evildoers abound, in 3-D APET comics

By Frank Esposito
Senior Staff Reporter

Published: August 16, 2013 4:01 pm ET
Updated: August 16, 2013 4:10 pm ET

Post Your Comments


Back to story


More stories

Image

New executives look to increase business at Little Tikes, Step2

August 26, 2014 12:46 pm ET

Northeastern Ohio toy rotational molders Step2 Co. LLC and Little Tikes Co. both have new top executives: Thomas Doherty at Step2 and Bill Cofield at ...    More

Image

Material Insights: Firm investing in new polymer technology

August 25, 2014 1:05 pm ET

Investment group wants to make Northeast Ohio the Silicon Valley of the plastics industry; shale gas revolution is headed overseas; and recycled HDPE ...    More

Image

Making the most of complexity

August 22, 2014 1:02 pm ET

In the global market for injection molded parts, custom molders have tried a million different ways to differentiate themselves from the pack. Make...    More

Image

Plastics News Now: Plastic execs take the ice bucket challenge

August 21, 2014 6:00 am ET

The North Face is using more recycled PET bottles, we check out advancements in prosthetic legs at the IDSA conference and watch those in the...    More

Image

Tree Armor: The buck stops here

August 20, 2014 12:17 pm ET

Pennsylvania farmer Jim Saunders pitched his idea for a vinyl wrap to protect tree trunks from deer to U.S. processors in five states but no one would...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events