WL Plastics opens HDPE pipe plant in S.D.

By Catherine Kavanaugh
Staff Reporter

Published: August 16, 2013 2:12 pm ET
Updated: August 16, 2013 2:18 pm ET

Related to this story

Topics Polyethylene, Pipe/Profile/Tubing

RAPID CITY, S.D. — WL Plastics Corp.'s new plant in Rapid City is cranking out HDPE pipes as the business continues to grow with the oil industry.

The Fort Worth, Texas-based company celebrated the opening of its 45,000-square-foot facility this week.

The plant began manufacturing operations on schedule following a hiring flurry to fill all 43 openings with the average starting pay of about $30,000.

"It's fantastic," plant manager Kenny Costello said. "We have state-of-the-art equipment — it's all touch screen and computerized — and a great workforce."

WL Plastics invested an estimated $12 million into the land, building and equipment, which is located on an 18-acre site in Rapid City. Resin arrives via a rail spur in Rapid City and is hauled by truck to the plant, where it is extruded into pipe ranging from less than an inch to 24 inches in diameter.

The plant is running 24 hours a day, every day of the week to supply its customers.

"They're mostly in the oil field up in the Bakken about four hours away," Costello said, referring to North Dakota's portion of the shale formation that has become the largest unconventional oil field in the United States.

In June, oil output in North Dakota increased to a record 756,980 barrels a day compared to 746,340 in May, according to Bloomberg.

WL Plastics decided to build its new plant in South Dakota to tap into a new labor force and take advantage of financial incentives offered by Raid City and the state, said David Fink, the firm's senior vice president of sales.

"If you're right on top of the oil field activity you're competing with all the energy companies in the area," Fink said. "This was a good opportunity to get a good employee base and the incentives put forward made the package attractive to us."

The Rapid City facility reportedly has the capacity to produce 60 million pounds of pipe every year and is expected to post revenue of $50 million to $60 million annually. Fink wouldn't confirm the capacity figure and he described the revenue projection as a rough ballpark number.

WL Plastics has corporate sales of $320 million, according to Plastics News's 2013 North America Pipe, Profile and Tubing Special Report.

With Rapid City in production mode, the company now has seven plants, including one that opened last year in Snyder, Texas, another major oil-producing region.

"The oil field business definitely is the majority of what we're doing from those two facilities but we're not exclusive to the oil and gas business," Fink said, pointing to product lines for municipal water and sewer systems, mining business and agricultural irrigation.

The company received a $500,000 package of incentives from Rapid City to build there and the state approved $10 million of revenue bonds through the South Dakota Economic Development Finance Authority.

South Dakota is stepping up efforts to find ways to create jobs by servicing the oil fields in North Dakota and Wyoming. In June, the state hired a business strategy firm to lead the way, marking a shift from attempts to expand employment in other sectors like bio-fuels and wind power.

WL Plastics has only been in production since June in Rapid City but company officials are talking about future plans.

"We're off to a good start," Fink said. "All of our lines are operational. We have a good customer base that we followed into that area that we're continuing to support and grow with and there is room for future growth. There's potential for an additional line and 8-10 people in the existing building. If we expanded the building, if that's ever warranted, there could be more growth."


Comments

WL Plastics opens HDPE pipe plant in S.D.

By Catherine Kavanaugh
Staff Reporter

Published: August 16, 2013 2:12 pm ET
Updated: August 16, 2013 2:18 pm ET

Post Your Comments


Back to story


More stories

Image

Pressure is on to replace aging gas pipes

July 30, 2014 2:47 pm ET

Polyethylene is the plastic replacement material of choice for modernizing the natural gas distribution system — so much so some are concerned...    More

Image

Vinyl siding's lead slips, but industry pushing back

July 29, 2014 2:04 pm ET

Vinyl siding continues to be the top cladding choice for home builders and remodelers but fiber cement is gaining ground — at an alarming rate...    More

A third generation is adding to the growth at American Vinyl Co.

July 28, 2014 4:32 pm ET

American Vinyl Co., a compounding and extrusion company that increased its workforce 20 percent this year, is looking to double its space for storing ...    More

Image

Who are the fastest growing pipe, profile and tubing extruders?

July 28, 2014 3:09 pm ET

Question: What's the word on this week's Plastics News annual ranking of the top Pipe, Profile and Tubing extruders in North America? Answer: Up....    More

Image

Australian trade group battles non-compliant PVC pipe fittings

July 28, 2014 2:19 pm ET

An Australian plastics industry association is battling against imported, non-conforming PVC pipe fittings, but is stymied by a convoluted web of regu...    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events