PN launches series by Gaylon White

By Robert Grace
Associate Publisher & Business Development Director

Published: August 19, 2013 10:39 am ET
Updated: August 19, 2013 11:31 am ET

Image By: Rich Williams

Related to this story

Topics Design
Companies & Associations Industrial Designers Society of America

I'm delighted this week to introduce a feature I have long wanted to include in Plastics News. Gaylon White and I first crossed paths some 30 years ago, though we didn't even know it until about two decades later.

In the mid-1980s I was in London editing European Rubber Journal. I invited Goodyear Tire & Rubber Co. CEO Bob Mercer to submit a column to discuss and defend Goodyear's involvement in a South Africa still racially divided by apartheid. He accepted and submitted an eloquent column that we published.

Years later, at an Industrial Designers Society of America reception in California, I got to speaking with Gaylon, who then was director of design programs with Eastman Chemical Co. It was that evening I learned that Gaylon — a former newspaperman and sportswriter — had been Mercer's speechwriter back in the mid-80s and had, in fact, written the column in question. Small world, as they say.

In March 2004, under Gaylon's leadership, Eastman launched the award-winning Eastman Innovation Lab website (www.EastmanInnovationLab.com) for designers and brand owners. In fall 2009, the lab introduced a highly acclaimed "Design Insights" video series, further burnishing Eastman's strong reputation within the design community.

Gaylon announced he would retire from Eastman early in 2012. So in September 2011 in New Orleans, after hosting what all knew would be his last annual Eastman breakfast seminar at IDSA's big international conference, it was truly remarkable to see a ballroom of several hundred designers and educators give Gaylon a lengthy standing ovation. Few non-designers command such respect in that community.

Gaylon is many things, but foremost he is a writer and a storyteller. So I have pestered him since he retired to become a regular contributor to Plastics News. First, he had to step back, take some time off and focus entirely on completing his project of passion — a non-fiction book about a 1956 minor-league baseball team — which he had started but never completed. The book, called The Bilko Athletic Club, is now done and about to be published. And Gaylon is ready to re-engage with his larger family, the plastics and design community.

The first of his planned series of monthly PN columns, to be

called Design Stories, is a truly special one. Gaylon interviewed the legendary Bill Moggridge, the British co-founder (in 1991) of the world-renowned IDEO design studio, in IDEO's Palo Alto, Calif., headquarters Sept. 13, 2007 — about a month before the 2,000-person Connecting '07 design conference Moggridge chaired in San Francisco.

Moggridge, who designed the first laptop computer, died last September at age 69.

Gaylon regretted that he had never gotten around to publishing that interview. But, for the purposes of this week's first Design Stories column, he dug out the old Moggridge tapes and put together the highlights for our readers.

Also, at www.plasticsnews.com/moggridge-audio, we are featuring about 23 select minutes of the audio interview, culled from their informal, 90-minute session.

Of his personal relationship with Moggridge, Gaylon noted: "He was a true gentleman — and a scholar. Most of all, he was a friend and mentor who helped guide my first steps in the design world and eventually spread the gospel of design in a company as risk-averse as a grandma who stashes money under her bed mattress."

And so, let the Design Stories begin. Told by master storyteller, Gaylon White.

Grace is PN editorial director and associate publisher.


Comments

PN launches series by Gaylon White

By Robert Grace
Associate Publisher & Business Development Director

Published: August 19, 2013 10:39 am ET
Updated: August 19, 2013 11:31 am ET

Post Your Comments


Back to story


More stories

Image

Prosthetic arm concept wins in student thermoforming competition

August 22, 2014 1:56 pm ET

Pressure forming company Freetech Plastics Inc. has returned with its annual Student Thermoformed Part Competition, intended to expand the exposure...    More

Image

Wal-Mart's 'Made in the USA' campaign is a great opportunity for reshoring effort

August 21, 2014 6:12 pm ET

Wal-Mart Stores Inc. has attracted a lot of attention with its latest “Made in the USA” push, and that's been by design. TV ads that...    More

Image

Ford demonstrates Magna's seamless rear window on new F-150

August 14, 2014 11:34 am ET

DETROIT — Ford Motor Co. today demonstrated its “seamless sliding rear window” feature developed by Canadian supplier Magna...    More

Image

Spotlight on new talent in the industry

August 13, 2014 11:15 am ET

This week's issue includes 20 profiles of some young high achievers — our first-ever batch of Plastics News Rising Stars. And I have an...    More

Image

MAPP's plant tours: Fun with a purpose

August 11, 2014 1:52 pm ET

Networking is one of the most underrated activities in the business world.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events