Jeco molds thermoformed door liner for the International Space Station

By Jennifer Kalish
Editorial Intern

Published: August 28, 2013 3:49 pm ET
Updated: August 28, 2013 3:58 pm ET

Image By: Jeco Plastic Products The door liner may look simple, but it can remain strong and durable at temperatures approaching -392 F.

Related to this story

Topics Thermoforming Aerospace
Companies & Associations

Plastic pallet and container maker Jeco Plastic Products LLC recently completed production of a thermoformed door liner for a cryogenic container that will be used by NASA on the International Space Station.

NASA approached the Plainfield, Ind., company around June 2012 to develop a door liner that could withstand extremely low temperatures.

Jeco completed the project around June 2013 and is now waiting for the finished product to be sent to the space station. While a completed door liner looks similar to a typical plastic tray, the manufacturing process was very tedious and difficult to perfect, said Jeco CEO Craig Carson.

"This is not a simple product; appearances are very deceptive in this regard," he said. "This was an extremely difficult product to make, and no one else had been able to successfully do it."

The door liners were made using polypropylene sheets with continuous internal polypropylene fibers oriented 90 degrees from one another to produce structures that remain strong and durable at temperatures approaching -392° F.

"We're dealing with materials and products that are not used in your normal sort of everyday ambient conditions," said Carson. "Very high temperatures; very low temperatures; extreme loading conditions; you know things like that."

Along with their rotomolded products, Jeco specializes in the manufacturing with unusual resins, primarily those with internal reinforcements for high-tolerance applications.

"That's our little niche of this market," he said. "It's not particularly big, and it's primarily stuff that is used in aerospace or things like that; you know, oddball things."

Because the door liners are only one component of NASA's cryogenic containers, it is unclear when exactly the finished products will be used on the space station.

"Everything is completed on the whole thing but the [container] assembly work," Carson said. "The completed assembly is due to be taken up to the International Space Station sometime in the near future."


Comments

Jeco molds thermoformed door liner for the International Space Station

By Jennifer Kalish
Editorial Intern

Published: August 28, 2013 3:49 pm ET
Updated: August 28, 2013 3:58 pm ET

Post Your Comments


Back to story


More stories

Image

Light shines on plastics innovation

March 30, 2015 10:57 am ET

The Society of Plastics Engineers shone a light on the benefits of plastic at NPE with its Plastics for Life competition, with the Grand Prize going...    More

Image

Fabri-Kal to expand its sustainable packaging with new Idaho plant

March 20, 2015 2:03 pm ET

Thermoformed packaging company Fabri-Kal Corp. plans to tap into Idaho's farming community to expand its sustainable packaging program.    More

Image

Thermoformer Plastic Ingenuity adding food packaging lines in Arkansas

March 18, 2015 3:46 pm ET

Plastic Ingenuity Inc., which calls itself one of the largest custom thermoformers in North America, is getting even bigger.    More

Image

Kumar left Wall Street to run thermoforming companies

March 18, 2015 6:00 am ET

Jay Kumar was working on Wall Street before he decided to invest in manufacturing, buying Universal Plastics Co. in 2012.    More

Market Reports

Flexible Packaging Trends in North America

North America represents about 30 percent of the global consumption of flexible packaging. Annual growth in this region is forecast at 4 percent during the next 5 years.

For more insight on growth opportunities, drivers of growth and the outlook for 2015, download this report.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events