Sussex IM buys cosmetic-compact business

By Jim Johnson
Senior Staff Reporter

Published: September 5, 2013 4:12 pm ET
Updated: September 5, 2013 4:16 pm ET

Related to this story

Topics Packaging, Consumer Products, Mergers & Acquisitions, Injection Molding, Injection molds
Companies & Associations Rexam PLC

Sussex IM’s buyout of Albea Group’s North American cosmetic-compact business is nothing short of a rebirth, the company’s president and founder says.

And Keith Everson expects to see a pretty substantial growth spurt now that the injection molder is in full control of that line of business.

The Sussex, Wis.-based company has been acting as a contract manufacturer, first for Rexam plc, and later for Albea Group, making millions of compacts each year since 2009.

But when Rexam sold that business to Albea at the end of last year, the deal triggered a contractual clause that allowed the two sides to re-examine the relationship.

Sussex made it clear it wanted to stand independently and worked for months to finalize a deal with Albea to acquire the compact business, Everson said.

“We made the decision that we wanted to go out on our own. And that’s where the offer to buy came up and we were able to close the deal,” he said. “Now we’re going to be able to work directly with the cosmetic firms again because everything else was filtered through Rexam or Albea.

“We’re one of the premier compact manufacturers left in the United States. A lot of that business has gone overseas or companies just went out of business. I’ve been calling on the cosmetic industry for 33 years. And when I started off in this area, there were probably 12 compact makers in the United States. Today there are two or three,” he said.

“How we have been able to stay in this business is the automation. We build our own automation, take the labor out of the formula and then we’re competitive globally,” Everson said.

The company’s customers include such well-known names as Elizabeth Arden, L’Oreal, Mary Kay, Neutrogena and Revlon.

About 15 percent of the company’s $70 million-per-year business currently comes from cosmetic compacts, but Everson sees that percentage doubling. The company employs 400 workers and the president does not see the deal affecting staffing levels.

“We’re going to be a lot more nimble and quick to respond. We don’t have as many hoops to jump through as other companies, bigger organizations, do,” Everson said.

Former Sussex IM owner Rexam approached Everson with the idea of a management buyout amid a downturn in the global economy in 2009. As part of that deal, the two sides agreed to a five-year supply arrangement.

When Albea acquired Rexam’s cosmetics, toiletries and household-care business, that opened the window to reexamine the business relationship, Everson said. Terms of the deal were not disclosed by the privately held company.

“Everybody’s excited here. We’re hearing from customers, they’re excited that they are dealing with us direct again, so it’s kind of like a new birth. It’s a rebirth,” the company president said.

Sussex IM also reacquired its innovation center, which had been located in Wisconsin but was moved to the Chicago area by Rexam in 2009 as a result of the management buyout.

That facility, at least for the cosmetics industry, sat idle for four years, Everson said.

“It’s a really neat area. It’s a place in our facility that’s designed for innovation, very flexible, very open,” he said. “And we’re now getting that back up and running and bringing in customers and showing them new, creative ideas.”


Comments

Sussex IM buys cosmetic-compact business

By Jim Johnson
Senior Staff Reporter

Published: September 5, 2013 4:12 pm ET
Updated: September 5, 2013 4:16 pm ET

Post Your Comments


Back to story


More stories

Image

Report: Brands are falling short on packaging sustainability

January 29, 2015 5:19 pm ET

Packaging in general, and plastic packaging in particular, has a long way to go in terms of recycling, according to a pair of environmental groups.    More

Image

Lund adds to aftermarket auto products portfolio with buy of Bushwacker

January 29, 2015 2:49 pm ET

Lund International Inc. has expanded its portfolio of plastic aftermarket vehicle accessories by acquiring Bushwacker Inc.    More

Image

Profit dips at Bemis Co. Inc.

January 29, 2015 2:04 pm ET

Profit dipped for Bemis Co. Inc. for all of 2014, but were up during the fourth quarter in what the company's leader called a “pivotal year....    More

Image

Chemtrusion, Mytex Indiana compounding plant set for expansion

January 29, 2015 1:35 pm ET

Japanese and American partners in a compounding plant in Indiana plan to expand the facility.    More

Image

Falcon Plastics expands in South Dakota

January 29, 2015 11:45 am ET

Falcon Plastics Inc. is putting the final touches on a 60,000 square foot addition that will nearly double the size of its Brookings, S.D., manufactur...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events