Brazil's PVC imports to increase steadily; North American producers may benefit

Bob Moser
PLASTICS NEWS CORRESPONDENT

Published: September 13, 2013 5:24 pm ET
Updated: September 13, 2013 5:33 pm ET

Related to this story

Topics Materials Suppliers, South America

SÃO PAULO — Slow but steady GDP growth, demand for new public-private housing construction and investments for both infrastructure and sanitation through at least 2016 will keep PVC imports on the rise for Brazil.

Analysts with IHS Inc. project that Brazil's PVC needs will approach 2.2 billion pounds by the end of this year, with steady annual growth topping 2.84 billion pounds by 2020. That demand will increasingly be met by imports, with no prospect of a PVC player investing in a new Brazilian plant or expansion of installed capacity, said João Cataldo, an IHS Brazilian specialist in PVC and chlorine.

"Brazil's economy will only continue to grow, despite low prospects for [gross domestic product]. All that development requires PVC and the majority must be imported, so it's a good market to focus on," Cataldo told Plastics News during the IHS Latin American Petrochemicals & Polymers Conference, held Sept. 4-5 in São Paulo.

Brazil currently boasts almost 2 billion pounds of installed capacity for PVC among three domestic Braskem SA plants, and one under Belgian producer Solvay SA. The domestic market produced 1.4 billion pounds in 2012, up 40 million pounds from the previous year, while operating at 72 percent capacity.

Brazil's PVC imports topped 680 million pounds in 2012 and are expected to reach 900 million pounds this year, with imports for January through July having totaled 520 million pounds. Those imports face a general tax of 14 percent, in addition to antidumping tariffs against specific countries that vary from 2-22 percent.

Braskem confirmed Sept. 3 it is bidding to buy the PVC assets of Solvay's Indupa business in Argentina and Brazil's São Paulo state, which produce PVC and caustic soda. Mexico's Mexichem and Braskem are seen as the most likely buyers. Solvay had announced in February a desire to sell the Indupa assets, which have a PVC production capacity of more than 1 billion pounds.

Cost challenges

Electricity dominates Brazilian PVC production costs to the tune of 59 percent, and the high cost of that energy puts Brazilian producers at a global disadvantage from the get-go.

Electricity in Brazil costs $75/MWh, compared with $13 in the Middle East, $27 in the United States, $46 in Asia and $68 in Europe. Only China, at $87/MWh, faces a greater challenge, according to IHS data.

The cost of natural gas in the U.S. is $4-$5/MMBtu, compared with $12-$14 in Brazil. IHS estimates a cost for U.S. shale gas of $260-$280/ton for ethane input, while producers in Brazil face $900-$950/ton for naphtha.

Producers in Brazil also face an industrial tax rate of more than 50 percent, while in the United States it is 35 percent, and in Europe 33 percent. These factors and more make Brazil an ideal export target for North American producers of chlorine derivatives, as shale gas helps drive down production costs there, IHS analysts said.

Cost challenges aside, Brazil's infrastructure deficiencies lock it in for PVC demand over the next decade, said Mauricio Harger, CEO of Mexichem Brasil.

"The infrastructure growth potential is great for housing, agribusiness and irrigation," said Harger, citing focal areas for Mexichem Brasil. Brazil currently has just 48 percent of its national waste sanitation network outfitted with contemporary piping, he added.


Comments

Brazil's PVC imports to increase steadily; North American producers may benefit

Bob Moser
PLASTICS NEWS CORRESPONDENT

Published: September 13, 2013 5:24 pm ET
Updated: September 13, 2013 5:33 pm ET

Post Your Comments


Back to story


More stories

Image

Dow loses appeal in price fixing case

October 1, 2014 11:10 am ET

The Reuters press agency reports that a federal appeals court in Denver has rejected Dow Chemical Co.'s attempt to overturn a $1.06 billion fine...    More

Image

New Hexcel plant will supply carbon fiber for Airbus A350 XWB

September 30, 2014 2:43 pm ET

Hexcel Corp. is investing $250 million on a new carbon fiber plant in France, with part of the production going into the future Airbus SAS A350 XWB.    More

Image

LyondellBasell CEO Gallogly to retire

September 30, 2014 3:00 pm ET

James Gallogly, CEO of Houston-based polyolefins producer LyondellBasell Industries NV, on Sept. 29 announced plans to retire in 2015.    More

Image

Asahi Kasei breaks ground on Alabama compounding plant

September 29, 2014 5:39 pm ET

Asahi Kasei Plastics North America will be able to solve two problems at once with a new compounding plant in Athens, Ala.    More

Image

DuPont shifting Teflon production in China

September 29, 2014 2:35 pm ET

DuPont Co. will spend more than $15 million to improve its fluoropolymer product offerings in China.    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events