Feedstock competition may drive Japan's chemical industry to niche products

By Gurdip Singh
Correspondent

Published: September 13, 2013 5:07 pm ET
Updated: September 13, 2013 5:26 pm ET

Related to this story

Topics Materials Suppliers, Asia

SINGAPORE — Japan's chemical industry faces a tough feedstock competition and will have to intensify its focus on specialty and niche products, both for the domestic and export markets, say industry official at an industry conference in Singapore.

U.S. shale gas and oil, an eventual feedstock source for American petrochemicals, are a major threat to the Japanese chemicals industry, said Yasushi Nawa, managing director and CEO at Mitsui Chemicals Asia Pacific Ltd. in Singapore.

Methane hydrates — solid methane-rich compounds found under sediment in the deep ocean floor, are a "feedstock substitute hope" for the globally-challenged Japanese chemical industries. But experts say methane hydrate feedstocks may take decades to develop, and the eventual cost is still unpredictable.

Industry observers commended the premium quality of Japanese specialty chemical products, saying these were well respected in the developed Western markets. But there was a legitimate fear of being challenged by similar products produced by the revived American petrochemicals sector and the emergence of ambitious Chinese producers backed by Western technology.

The U.S. shale oil and gas resources are good for another 100 years of supplies. Their development has initiated the rebirth of the U.S. petrochemicals sector, said Balaji Singh, president of Houston-based CMR Inc. and organizer of the Singapore conference, "Global Polyolefins in Transition," held Sept. 11-13.

The Japanese know that the Chinese have much more shale gas and oil resources that the United States, and the Chinese's renowned ambition of mass production, using cheap resources, would re-write all market economics for specialty chemicals.

But Mitsui's Nawa still felt the Japanese were confident of working their way out through niche-product diversifications and research and development on new products. He added that opportunities still exist in the health care, sanitary care and food safety care segments.

He highlighted Mitsui's US$2 billion investments in semi-finished and finished product plants in Southeast Asia and China since 2000. Nawa said Mitsui is set to commercialize its latest investment of US$200 million in Singapore, including a 772 million-pounds-per-year polyethylene plant at Singapore's petrochemical hub on Jurong island, which will start production in January 2015.

Also, Mitsui is a 20 percent partner in a 661million-pound-per-year metallocene polymer plant on Jurong island. The plant, in partnership with Japan's Prime Polymer Co. Ltd., is scheduled to start production in the second quarter of 2015.

Mitsui, he said, was not taking any high-risk of investing in upstream facilities, such as naphtha plant. The company is comfortable to be aligned with third-party sourcing for feedstocks.


Comments

Feedstock competition may drive Japan's chemical industry to niche products

By Gurdip Singh
Correspondent

Published: September 13, 2013 5:07 pm ET
Updated: September 13, 2013 5:26 pm ET

Post Your Comments


Back to story


More stories

Image

Material Insights: PP production issues, preparing for NPE

January 26, 2015 1:38 pm ET

Production problems in Texas add more complication for polypropylene, Entek has new equipment ready to show compounders at NPE and we take a look...    More

Image

J6 Polymers to buy Stepan unit

January 26, 2015 12:22 pm ET

NORTHFIELD, ILL. — Stepan Co. plans to sell its specialty polyurethanes systems business to J6 Polymers LLC in a cash deal.    More

Image

UK legislators debate fracking

January 26, 2015 12:19 pm ET

LONDON — An influential group of members of Parliament has called for a moratorium to be imposed on fracking for shale gas as politicians...    More

Image

Oxo-biodegradable lobby slams 'scaremongering'

January 26, 2015 12:16 pm ET

Single-use plastic carrier bags made from biodegradable material should be exempted from the government’s proposed 5p-a-bag levy in England,...    More

Image

2014 leaves some resin firms in the black while others struggle

January 23, 2015 2:37 pm ET

On the financial side, 2014 was good for Hexcel Corp., so-so for Celanese Corp. and it could have been better for Omnova Solutions.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events