Safety syringe maker wins $113 million judgment

By Jeremy Carroll
Assistant Managing Editor

Published: September 25, 2013 4:08 pm ET
Updated: September 25, 2013 4:09 pm ET

Related to this story

Topics Medical, Legal

A jury awarded Retractable Technologies Inc. more than $113 million after it determined a competitor attempted to obtain a monopoly in the plastic safety syringe market.

Retractable Technologies sued Becton, Dickinson and Co. (BD) in 2007, saying the manufacturer of medical devices had violated the company’s patents for a retractable syringe, created a monopoly on the market and used anticompetitive tactics to push out competition.

A jury dismissed most of the counts, including claims that BD had established a monopoly on the market, but agreed that the company did engage in anticompetitive conduct with the intent to acquire and maintain a monopoly in regards to safety syringes.

The jury also said BD engaged in false advertising under the Lanham Act. The judge in the case will rule on if those specific items deserve a financial payment as well.

“The company is very pleased with the verdict, and believes that it is a step toward opening the market to its innovative products,” said Retractable Technologies attorney Roy Hardin.

BD vowed to appeal the ruling.

“We’re disappointed with the portion of the verdict that favored [Retractable Technologies], and we believe this aspect of the verdict was erroneous,” said Jeffrey Sherman, senior vice president and general counsel, in a statement. “We will file an appeal at the earliest opportunity.”

BD told investors it would record a pretax charge of approximately $340 million (approximately $211 million after taxes and an estimated $1.06 per diluted share) in its 2013 fiscal fourth quarter results, because of the verdict.

In its original complaint, Retractable Technologies called BD the “nation’s dominate maker and seller of disposal syringes.”

Retractable Technologies said it invented a syringe that automatically retracted the needle after the injection is given and before it is withdrawn from the patient, eliminating concerns of health care workers accidently sticking themselves with the needle.

The VanishPoint syringe system is made of plastic and is spring-loaded.

Several years after that product was on the market, BD introduced the Integra syringe, which operated in a similar fashion as the VanishPoint syringe, Retractable Technologies alleged.

Retractable Technologies said BD employed various forms of exclusionary contracts with health care facilities in order to dominate the market. Under the contracts, facilities would be required to maintain a certain level of purchases through bundling of items, so they would not able to stray from one product, even if they could get it cheaper elsewhere, the complaint alleged.

Retractable Technologies also claimed BD caused or induced trade shows to bar and exclude Retractable’s sales staff from entering and demonstrating their products.

“For example, Retractable has been barred from one or more trade shows, even though the purpose of the shows was to demonstrate available safety technology to medical staff,” the complaint alleged. “Hospital and trade show personnel have explained the exclusion of Retractable’s sales personnel by saying their facility is under contract with BD, exclusive to BD, or standardized with BD.”

Retractable Technologies alleged that BD labeled several of their needle products as “safety” or “safe” even though they were no safer than traditional needles. That point is important because health care facilities are often willing to pay a higher price for “safety” products, which are sold in a separate sub-market of products.

The case is expected to be back in Texas District Court on Dec. 12.


Comments

Safety syringe maker wins $113 million judgment

By Jeremy Carroll
Assistant Managing Editor

Published: September 25, 2013 4:08 pm ET
Updated: September 25, 2013 4:09 pm ET

Post Your Comments


Back to story


More stories

Image

Global giant Foxconn to make, sell molding machines

September 26, 2014 2:48 pm ET

For years, Taiwan's Foxconn Technology Group has been the world's largest contract manufacturer for electronics, with more than 1 million employees...    More

Image

Nypro Healthcare continues to grow following Jabil acquisition

September 26, 2014 1:59 pm ET

Nypro Healthcare's newest medical device manufacturing facility offers 200,000 square feet of carefully configured Class 8 clean room molding and...    More

Image

England's Essentra buying Abric Berhad

September 26, 2014 11:31 am ET

Packaging firm Essentra plc has announced the planned acquisition of Abric Berhad, a Kuala Lumpur-based manufacturer of security sealing products.    More

Image

New medical firm buys Clairson Plastics

September 19, 2014 4:33 pm ET

Custom injection molder Clairson Plastics is being sold to a new start-up that plans to dive into the medical market with a new dialyzer, a key...    More

Image

Foster building medical polymers plant

September 19, 2014 1:39 pm ET

Foster Delivery Science is investing $8 million in a new plant in Putnam, Conn., for production of medical polymer blends, as well as rods, film or fi...    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events