Plastics Europe urges Asian leaders to be proactive on health and litter issues

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: September 30, 2013 1:39 pm ET
Updated: September 30, 2013 1:44 pm ET

Image By: Steve Toloken, Plastics News Wilfried Haensel, executive director of Brussels-based PlasticsEurope, speaking at the Asia Plastics Forum

Related to this story

Topics Materials, Sustainability, Asia

TAIZHOU, CHINA — Asia's plastics industry may not yet be facing the kind of pressure governments are putting on European industry to address human health and marine litter problems, but the region needs to pay attention early or risk more bans and other restrictions, the head of Europe's leading plastics association told a meeting of Asian leaders.

Wilfried Haensel, executive director of Brussels-based PlasticsEurope, said those issues are creating strong pressure in the West for banning or deselecting plastics in favor of other materials. He warned a meeting of the Asia Plastics Forum, an umbrella group of 12 national trade associations stretching from India to China and Japan, not to be complacent.

"You in some countries may not sense at the moment the heat on marine litter but in other places it is there," he said. "We have to be aware in Europe and I would say in the U.S., the pressure on de-selection and bans is definitely increasing. We see a ramp-up and I am afraid more will come."

At the APF meeting, held Sept. 25-26 in Taizhou, the Asian associations named Callum Chen, a Malaysian industry executive and secretary general of APF, as the region's top representative to a global industry steering committee on marine litter. He joins Haensel and Steve Russell, the vice president of plastics for the Washington-based American Chemistry Council.

In his presentation, Haensel said globally the industry will have 140 marine litter related projects this year, up from 100 in 2011.

He said Asian countries did 25 percent of the projects, while Europe, the Middle East and Africa were responsible for 40 percent and North and South America 35 percent.

He encouraged the Asian associations to engage in more programs, and he noted that PlasticsEurope and ACC were contributing $430,000 over four years to a United Nations scientific advisory body, the Group of Experts on the Scientific Aspects of Marine Environmental Pollution.

"I would hope that next time I come we would see that Asia has a share of 33 percent of the total" projects, he said. "I would like to encourage you to participate in it. This is one of the very few examples where we have managed to establish a global cooperation in the plastics industry."

In general, he and other speakers at the forum said that Asian governments are mostly pressuring their industries on waste management and litter.

But in his two hours of presentations at the APF, Haensel also sought to pivot attention toward sustainability and chemical health, arguing that those are becoming bigger issues in Europe and North America and will come to Asia.

"We may think this is a little bit down the road in some countries but it is a globalized world," he said. "That means any issue that is happening in this world is picked up by others. Also your export markets are facing this problem more than you may be facing it here."

He said the chemical health issues will require industry to communicate more thoroughly, and he suggested they could pose a more important longer-term challenge for the industry than solid waste.

"The other more important aspect that I think we have to take more seriously… is the story about chemicals and plastics and the poisoning suspicions by consumers about using plastics," he said. "That is something where we are playing with emotions. That is something that is extremely difficult to address."

In a follow-up interview after his speech, he also linked in concerns about potential human health risks from nano-materials, and said if health concerns, whether from endocrine disrupting chemicals, nano-technology or other issues, are not addressed, they could hurt the industry's long-term economic growth.

"If you don't take action in Europe, serious action, you will lose more from bans and de-selection of plastics than you will gain in new applications coming from innovation — we have to be very careful," he said.

"In particular when you talking about innovation you are talking about nano-materials, you are talking about highly sensitive applications in medical, name it," said Haensel. "All these are of a dimension where people are normally getting scared. They are scared about the personal health aspects."

If the public concerns are not addressed, Haensel believes that it could harm the plastics industry's development prospects.

"We have to take action in two regards — we have to address the concerns of the people seriously, and accept that there are concerns and not try to talk this away," he said. "The second is we have to build trust for the new innovation."

"If we are missing out on nano, we will have a tremendous problem to realize innovative applications that are key in the future not only for social development, but also for our industry," he said.

He said European government officials have told him the industry has three basic challenges with public issues.

"In plastics you can boil it down to three simple areas where we are having problems," Haensel said. "That is what a high-ranking policy maker from the EU Commission told me: 'You are killing people because they believe you have toxic substances in your material. You are using up scarce resources, depletion of oil, and you are ruining the environment by littering.'"


Comments

Plastics Europe urges Asian leaders to be proactive on health and litter issues

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: September 30, 2013 1:39 pm ET
Updated: September 30, 2013 1:44 pm ET

Post Your Comments


Back to story


More stories

Image

DC banning PS foam containers

July 30, 2014 2:34 pm ET

Washington D.C. Mayor Vincent Gra signed into law on July 29 a bill that will ban polystyrene foam food and drink containers from the District.    More

Image

Sainsbury, Schoeller Allibert to recycle food handling crates

July 30, 2014 1:37 pm ET

British retail group Sainsbury's has contracted Dutch recycler Schoeller Allibert BV to reprocess all of its old food crates back into food-grade...    More

Image

Styrolution will open new production late 2014

July 30, 2014 12:54 pm ET

Germany-based styrenic materials group, Styrolution, has announced it is expanding its facility in Ludwigshafen, Germany.    More

Image

Vinyl siding's lead slips, but industry pushing back

July 29, 2014 2:04 pm ET

Vinyl siding continues to be the top cladding choice for home builders and remodelers but fiber cement is gaining ground — at an alarming rate...    More

Unipex Group buys Ferguson Chemical Innovation

July 29, 2014 1:57 pm ET

Chemical distributor Unipex Group Inc. announced July 29 that it had purchased Ferguson Chemical Innovation, a Brampton, Ontario-based supplier of che...    More

Market Reports

Plastics Recyclers Data Report & Directory

This exclusive MS Excel database contains all the companies from Plastics News' ranking of top North American Recyclers and Brokers by reprocessed volume and also includes a directory with materials processes, services offered and company contact information. Data is based on primary research by PN editorial staff.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events