Recaro seat goes to Delta

By Catherine Kavanaugh
Staff Reporter

Published: October 4, 2013 2:44 pm ET
Updated: October 4, 2013 2:50 pm ET

Recaro seat goes to Delta

Image By: Plastics News photo by Catherine Kavanaugh Recaro President John Riedl, left and Delta CEO Barry Kempa

Related to this story

Topics Consumer Products, Automotive parts

AUBURN HILLS, MICH. — Recaro Child Safety LLC President John Riedl didn't have to look far to find an injection molder to make the largest component for an infant car seat that will be assembled at its facility 35 miles north of Detroit.

The polypropylene shell of the Guardia — Recaro's next product — and 13 other smaller, mostly nylon and acetal parts will be made two doors away in Auburn Hills at Delta Engineered Plastics LLC.

Recaro awarded a multiyear parts production contract to Delta, which supplies injection molded parts to a variety of transportation and industrial customers. The deal could be worth about $5 million to Delta if infant car sear sales hit 200,000 units as expected.

"Recaro could have sourced this business to any company in the world but they chose Michigan," said Barry Kempa, Delta's chief operating officer. "This certainly is a testimonial to the renaissance occurring in American manufacturing and it's great to be part of that renaissance."

Recaro is taking more than baby steps to bring back business from overseas; it is making great strides in reaching out to U.S. suppliers, particularly those in hard-hit Michigan, which is still shrugging off the Great Recession.

"A year ago we bought 60 percent of our plastic and metal components from overseas. By the end of 2014 that will be about 70 percent U.S.," Riedl said, adding that domestic trim and fabric remains cost prohibitive because of Recaro's volume.

Riedl and Kempa gathered Oct. 3 with their staffs at Recaro for a luncheon sourcing celebration. Their workforces will grow before the Guardia hits national stores and online outlets in the spring for about $250. Delta will add 10-15 more employees to the 225 it has and Recaro at least 20.

Riedl is a big believer that supplier proximity will pay off in the long run for Recaro, which reshored production of half the plastic parts for its child booster seat back to the United States in 2013 and plans to source the other half in a year.

While Asia offers cheaper labor, Riedl sees plenty of other advantages for dealing domestically. The company will save on travel time and expenses, get products to market sooner, and communicate more in person or by phone than email.

"It makes sense if I don't have to send five engineers to China four times a year, if I know the quality is good every time because I can drive and measure the wall thickness. And if there's a problem, I find out about it that day and not after we shipped product," Riedl said. "And if I can release a new product nine months earlier because we can do it faster here, that's nine months of sales and profits that I would have lost if I made it in China.

"I have a philosophy that the end-to-end cost is actually less expensive here for our business bottom line even though the unit cost is slightly higher."

Recaro has seen its sales triple in two years to $13 million, Riedl said. Sales are projected to grow to $20 million in 2014, he added.

The Guardia fills a niche in the product line of the company that got its start making car seats for Porsche. With the introduction of an infant seat that can be used to carry a baby home from the hospital, Recaro will offer safety seats for all ages and stages of childhood.

Riedl said the infant seat will bring a couple new features to the market, including a padded harness system that won't twist, making it easier to buckle in babies, and an adjustable base for secure fits in any kind of vehicle. Delta is making the base.

"It doesn't inspire confidence when you pay all this money for technology and have to put a towel under the seat," Riedl said. "We developed a double-adjust base. You gain 11 degrees of adjustability."

Delta will use 170-ton to 1,450-ton machines to manufacture 14 parts that range in weight from an ounce to 2½ pounds. The company's molding process also will allow it to make changes and improvements for other features that are on the drawing board for the second-generation Guardia.

Kempa likes Recaro's forward thinking.

"We're looking for good companies, well-managed companies, focused companies that are going to be leaders and grow their business," he said.

Recaro plans to promote its domestic partnerships with Guardia and other products.

"We can't say 'made in the USA' because the trim cover is part of it, but we will tell people over 70 percent of the content is U.S. content," Riedl said. "I think the American consumer will say they're making a significant effort to keep manufacturing here as best they can."


Comments

Recaro seat goes to Delta

By Catherine Kavanaugh
Staff Reporter

Published: October 4, 2013 2:44 pm ET
Updated: October 4, 2013 2:50 pm ET

Post Your Comments


Back to story


More stories

Image

Producers urge booming Brazilian housing market to use EPS

April 18, 2014 1:08 pm ET

Leaders in Brazil's plastics industry are asking lawmakers to mandate the use of expandable polystyrene (the raw material for expanded EPS) in new...    More

Image

Navigating the rough seas of selling your company

April 17, 2014 2:47 pm ET

For family owned plastics firms who survived the Great Recession, many wonder: Is it time to sell, retire and sip cocktails on the beach? Or, maybe...    More

Image

Envision begins production of compostable, bio-based tablecloths

April 17, 2014 12:17 pm ET

A line of eco-friendly party supplies and tableware now will include compostable tablecloths made by a Wichita, Kan.-based nonprofit that provides...    More

Image

Adding flavor to capture sales

April 16, 2014 4:03 pm ET

Water bottles increasingly are designed and molded with filters and infusers to hold fruit, vegetables or herbs to give water a different taste.    More

Image

Polyair rebuilds from Sandy with help from Process Control

April 16, 2014 4:11 pm ET

Hurricane Sandy gutted Polyair Inter Pack Inc.'s Carlstadt, N.J., plant more than a year ago, and Brian Clawson won't soon forget the devastation.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events