Akron Polymer installs film casting line

By Bill Bregar
Senior Staff Reporter

Published: October 9, 2013 5:20 pm ET
Updated: October 9, 2013 5:26 pm ET

Akron Polymer feature

Image By: Plastics News photo by Bill Bregar Akron Polymer Systems President and CEO Frank Harris in his firm's clean room, home to its new film casting line

Related to this story

Topics Automotive, Medical, Film & Sheet, Aerospace

AKRON, OHIO — Akron Polymer Systems Inc. has installed a solvent film casting in a new 800-square-foot clean room at the specialty polymer development company.

The machine from Frontier Industrial Technology Inc., which can make cast film up to 18 inches wide, will go into production in October. APS is installing a new laminator on the line.

Before starting up the clean room and film line, Akron Polymer Systems had to outsource that production to toll film makers, according to President and CEO Frank Harris.

The cast film floats on a blanket of air during the process, he said.

Frontier Industrial Technology of Towanda, Pa., custom-made the film line, which is made of stainless steel for clean room use.

Akron Polymer Systems also is building a smaller clean room for small-scale, hand-casting of film.

Film is a key part of several Akron Polymer Systems projects, including substrates for flat panel displays and polymers for membranes used in gas separation, water purification and fuel cells.

But Akron Polymer Systems is involved in other product developments as well, such as biodegradable, high-strength polymers, nanotechnology, thermally stable composite resins for missile nose cones, and biomedical innovations such as a plastic implant that enhances bone growth in cancer patients. APS is making the polymer used in research at Methodist Research Hospital in Houston.

Akron Polymer Systems is housed in a 16,000-square-foot building full of reactors, compounding lines and laboratory equipment and the new cast film line. Beyond the equipment, the firm has some intellectual polymer-science firepower, as nine of the 12 employees have PhDs.

The company makes batch sizes of the new polymers, working on joint product and process development, does custom synthesis of new polymers and monomers for large corporations, and imports high-performance polymers and additives.

Harris said film and coatings played an important role from the beginning of Akron Polymer Systems, to develop second-generation film for liquid-crystal displays.

In the late 1990s, University of Akron researchers developed the first generation of the film. By the early 2000s, the university had licensed technology to a maker of jet cockpit displays.

Another licensing deal followed with a Japanese maker of large-screen TVs.

Akron Polymer Systems also worked on technology called in-plane switching films, winning a grant from Ohio's Third Frontier program. Film made by in-plane switching lines up the liquid crystals to give a vivid, clear picture, improving off-angle viewability, such as looking at the screen from a side angle. Harris credits a grant from Third Frontier for helping Akron Polymer Systems in its early days — and keeping the high-level jobs in Akron.

"The Third Frontier was very important in starting our business," he said.

APS uses polymer science to manipulate polymers to produce high-performance materials, sometimes for harsh operating conditions. For example, the membranes for fuel cells must withstand very high temperatures.

Harris and Stephen Chen, both polymer science professors at the University of Akron, founded Akron Polymer Systems in 2002. Chen now is the dean of UA's College of Polymer Science and Polymer Engineering. Harris, who retired from the university in 2005, is emeritus distinguished professor of polymer science and biomedical engineering.

Akron Polymer Systems uses a long list of advanced materials, including polyimides, polysulfone, composites and biodegradable polymers for medical.

The company's income sources are royalty payments on research and development, government funding, custom synthesis of pilot-plant quantities, sales of imported specialty chemicals and consulting services.


Comments

Akron Polymer installs film casting line

By Bill Bregar
Senior Staff Reporter

Published: October 9, 2013 5:20 pm ET
Updated: October 9, 2013 5:26 pm ET

Post Your Comments


Back to story


More stories

Image

Plastic products win Best of IBS awards

January 30, 2015 1:36 pm ET

LAS VEGAS — A year ago, inventor Jeremy Smith of Utah took his idea for an electrical outlet cover plate with LED lights on the bottom edge to...    More

Image

Lund adds to aftermarket auto products portfolio with buy of Bushwacker

January 29, 2015 2:49 pm ET

Lund International Inc. has expanded its portfolio of plastic aftermarket vehicle accessories by acquiring Bushwacker Inc.    More

Image

Profit dips at Bemis Co. Inc.

January 29, 2015 2:04 pm ET

Profit dipped for Bemis Co. Inc. for all of 2014, but were up during the fourth quarter in what the company's leader called a “pivotal year....    More

Image

Plastics News Now: Losing weight with style, plastics in the Dragons' Den

January 29, 2015 6:00 am ET

A 19-year-old entrepreneur brings business to a U.K. injection molder after winning support on TV's Dragons' Den, auto suppliers combine...    More

Image

Plastics help Volt hit new target

January 28, 2015 1:54 pm ET

The 2016 Volt, unveiled at the North American International Auto Show in Detroit in January, features a sportier exterior design — GM calls it &...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events