Kautex reach expanding, targeting consumer packaging

By David Eldridge
EUROPEAN PLASTICS NEWS

Published: October 16, 2013 3:00 pm ET
Updated: October 16, 2013 9:09 pm ET

Kautex Maschinenbau

Image By: Plastics News, Caroline Seidel Kautex Maschinenbau GmbH (Hall 14/A16, A18) executives Olaf Weiland, left, and Andreas Lichtenauer with the firm's new KBB extrusion blow molding machine

Related to this story

Topics Packaging, K 2013, Business News & Features

DÜSSELDORF, GERMANY — Bonn, Germany-based Kautex Maschinenbau GmbH (Hall 14/A16, A18) has a well-established position in the automotive segment of the blow molding machinery market. With the launch of the KBB series of fast-cycling extrusion blow molding machines at K 2013, it hopes to expand its position in consumer packaging applications.

The KBB series is Kautex's first move into all-electric processing technology and to mark the occasion, a KBB60 machine was unveiled on the company's stand Oct. 16 by Olaf Weiland, chairman and CEO, and Andreas Lichtenauer, managing partner.

At the K 2007 show, Kautex highlighted a hydraulic machine for consumer packaging, and at K 2010 it showed a machine as part of an integrated production line.

"With the unveiling of the KBB, we are taking the next step," Weiland said of its K 2013 exhibit.

Speaking afterwards, Weiland discussed the company's strategy.

"We will put a lot of energy into improving our visibility in the packaging market. Our visibility in the automotive market is at a high level. It keeps the company running at quite a pace because the ever-growing demand technologically and economically from the automotive industry is driving us and we don't foresee any change in our strategy with regard to that.

"It's not a change, but a continuation in what we have done over the last six years to improve our footprint in the packaging market. This [the KBB machine series launch] is a symbol of that."

Weiland said that at K 2010 Kautex showed its understanding of the packaging market when it demonstrated a full production line, including traceability of bottles, integrated automation and other features.

He contrasted the more fragmented nature of the extrusion blow molding market against the injection blow molding market for PET packaging.

"In PET, everyone is working in an integrated fashion, especially in the beverage industry. But in extrusion blow molding, it has not yet come so far. If you go round the booths of extrusion blow molding machine manufacturers, everyone seems pretty much focused on their own piece of the cake.

"But I think we have to work in partnerships and offer complete solutions to our customers," Weiland said.

Kautex's sales have grown by 75 percent in the past six years. Weiland said one reason for this success is "a very good culture" in the company.

Since February, a group of 45 Kautex managers, including Weiland and Lichtenauer, have owned a majority — 50.1 percent — share in the equity of the company.

That resulted from a deal in which Berlin-based investment company Capiton AG purchased Steadfast Capital Markets Group's stake in the company.

Looking further back, Munich-based Adcuram Industriekapital bought Kautex Maschinenbau from SIG Group in 2004. When Steadfast bought out Adcuram's share in 2007, five of Kautex's managers owned 23 percent of the equity.

Now that ownership has broadened out to 45 managers, including ones working in the United States and China, which benefits the company, Weiland said.

"You have to make it clear to people again and again that what counts is the overall development of the company. I think owning a share of the company makes it very clear that it is the total development that counts," he said.

The new KBB all-electric series is available in feed strokes from 400-1,000 millimeters and closing forces from 10-40 metric tons.

The company claims a 25 percent reduction in the dry cycling time. That is achieved by accelerating transport movements in the machine as well as the opening and closing movement of the mold.

The traversing time for 770mm from the head to the calibration position is 0.6 seconds, according to Kautex.

The KBB machine series has other advantages, the firm said: reduced energy consumption; energy recovery; minimized stop periods, including a 15-minute mold changeover time involving two people; extended maintenance intervals; a new-generation control system; and a reduced footprint.

Speaking about Kautex's move into the all-electric field, Weiland said: "Some Italian competitors have been very active in this field for a number of years. Our company was, for several reasons, somewhat hesitant.

"At first sight, you could say we are somewhat late in presenting an all-electric machine in the market. But if you look at the history, we did something like this 12 years ago [when Kautex was part of SIG Group], but it did not mature. We learned a lot from that and we learned also from the experiences customers have had with competitive products," Weiland said.

Other new products on the Kautex stand include: BC Connect, which allows operators to monitor machines remotely using a personal computer, tablet or smartphone; and "virtual machines," which enable training through simulation software where the control and operating interfaces correspond to the real machine.


Comments

Kautex reach expanding, targeting consumer packaging

By David Eldridge
EUROPEAN PLASTICS NEWS

Published: October 16, 2013 3:00 pm ET
Updated: October 16, 2013 9:09 pm ET

Post Your Comments


Back to story


More stories

PSB Industries acquires plastic closures specialist

July 31, 2014 3:47 pm ET

French packaging manufacturer PSB Industries has signed an agreement to acquire C+N Packaging Inc., which specializes in plastic closures for...    More

Image

New technology molds plastic with consumable liquid

July 31, 2014 9:40 am ET

A new blow molding and filling technology called LiquiForm has been announced that uses pressurized consumable liquid instead of compressed air to...    More

Image

Plastics News Now: PVC pipe used to help repel sharks from beaches

July 31, 2014 6:00 am ET

Also, we visit Nicolet Plastics which is using a unique employee structure, and Washington D.C. bans polystyrene.    More

Image

Pressure is on to replace aging gas pipes

July 30, 2014 2:47 pm ET

Polyethylene is the plastic replacement material of choice for modernizing the natural gas distribution system — so much so some are concerned...    More

Image

Sainsbury, Schoeller Allibert to recycle food handling crates

July 30, 2014 1:37 pm ET

British retail group Sainsbury's has contracted Dutch recycler Schoeller Allibert BV to reprocess all of its old food crates back into food-grade cont...    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events