Solar, composite plane pilot: Risks beget innovation

Hamish Champ
PRW

Published: October 17, 2013 5:04 pm ET
Updated: October 17, 2013 5:14 pm ET

Bertrand Piccard, pilot of the Solar Impulse aircraft, speaks Thursday of aeronautics and innovation during the K show in Düsseldorf, Germany.

Image By: Plastics News, Catherine Seidel Bertrand Piccard, pilot of the Solar Impulse aircraft, speaks Thursday of aeronautics and innovation during the K show in Düsseldorf, Germany.

Related to this story

Topics Sustainability, Materials, Europe, Composites, K 2013, Business News & Features

DÜSSELDORF, GERMANY — Flight pioneer Bertrand Piccard, one of two pilots set to fly around the world in a solar-powered airplane in two years' time, told a K show audience the innovation surrounding the project could help solve many of the world's environmental ills.

Piccard, together with his flying partner André Borschberg, will in 2015 pilot a Solar Impulse aircraft made with the latest composite materials and energy-saving technologies around the globe in 25 days over a period of four months, with each pilot taking the controls for up to four days and nights before taking a break.

As well as its aeronautical achievements, Piccard told an audience at a Plastics Europe presentation that he hopes the project will illustrate what can be achieved when partners from different fields come together for a common cause.

However, despite having successfully flown around the world nonstop in a balloon, Piccard found that the world's aeronautical industry did not believe a solar-powered plane could make the same journey.

Solar-powered planes have already flown, Piccard said, but those planes were small, remote-controlled craft, featuring wing-spans of little more than 4 meters and a payload of a 50g camera to record the flight.

Solar Impulse will have a 64-meter wingspan, weigh the same as a small car and would be flown by a human being.

"The aero industry told us it was impossible. So when we declared some 10 years ago that we would make this attempt we were obliged to continue. We had burned our bridges, so to speak, and we brought on board partners like Bayer MaterialScience AG who were from outside [the aeronautical industry] and would bring with them new solutions untainted by prejudice. They would think out[side of] the box," he said.

To illustrate his point, Piccard said that the company that came on board to build the plane's ultra-light body was not from the aero industry but was a boat builder that had constructed a yacht that had competed in the 2003 Americas Cup. "They knew how to handle composites," he said.

"So we produced a plane that, not including the batteries and solar panels, was 10 times lighter than the best glider in the world championships. But we still had to fly the plane day and night.

"We brought all these elements together: composites, energy-saving technology, lightweight materials and our experience, and they all had to work together, or else the plane would crash. And that was symbolic of the state of Planet Earth," he said.

"The plane is a symbol of our world and the need not only for innovation but for implementation of that innovation as well."

Piccard said the success of a number of test flights, including one from San Francisco to New York, raised the profile of what the team was trying to achieve, particularly in the eyes of national and regional governments.

"The European Parliament used Solar Impulse to illustrate how its energy and environmental policies could work. What went into the plane is available to everyone, now."

The project is an indicator of what could be achieved through collaborative effort, Piccard said, pointing by way of an example to work Solvay Engineering Plastics (Hall 6/C61) had done with BMS (Hall 6/A75-1,A75-3) on the plane's batteries.

Despite the Solar Impulse's obvious environmental credentials, Piccard does not see the project as some sort of an evangelical journey designed with the sole aim of convincing people to live in a certain way.

"We're not telling people what to do, we are trying to get them to think about things. We're not about being green, we're about being clean. We want to highlight the need to reduce the impact of modern life on the world around us," he said.

"We want to use Solar Impulse to get the message across that in order to get a better quality of life risks need to be taken, established certainties need to be questioned and to reject commonly held assumptions and dogmas. The mind has to be open to innovation."


Comments

Solar, composite plane pilot: Risks beget innovation

Hamish Champ
PRW

Published: October 17, 2013 5:04 pm ET
Updated: October 17, 2013 5:14 pm ET

Post Your Comments


Back to story


More stories

Image

Optical disc molder OEM getting into micromolding with acquisition of CDA

August 29, 2014 11:24 am ET

Optical disc replicator and molder Optical Experts Manufacturing Inc. of Charlotte, N.C., has expanded its core business and entered new high...    More

Image

EPA fines RI polymer company

August 29, 2014 1:20 pm ET

A Rhode Island polymer manufacturer has reached a $60,000 settlement with the U.S. Environmental Protection Agency (EPA) for violating federal clean...    More

Image

Chinese compounders seek market shares, often at the expense of margins

August 29, 2014 10:02 am ET

China's largest compounder, Kingfa Sci. & Tech. Co. Ltd., as well as its more automotive-focused counterparts Shanghai Pret Composites Co. Ltd. and...    More

Image

Green trend boosts plastic building materials business in China

August 29, 2014 9:42 am ET

The greening of China's domestic building materials market is giving the plastics industry a boost.    More

Polish injection molder Teknorubber up for sale

August 29, 2014 9:14 am ET

Polish plastic parts maker Teknorubber has been put up for sale following its insolvency filing in March 2014. The company is to be auctioned through ...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events