Solvay rolls out resins for mobile devices

By Robert Grace
Associate Publisher & Business Development Director

Published: October 18, 2013 2:13 pm ET
Updated: October 18, 2013 2:25 pm ET

Related to this story

Topics Materials Suppliers, K 2013, Business News & Features
Companies & Associations Solvay SA

DÜSSELDORF, GERMANY – The boom in smart mobile devices is driving materials development at Solvay Specialty Polymers USA LLC.

The Alpharetta, Ga.-based unit of Belgium's Solvay Group (Hall 6/C61) rolled out some new and revamped series of resins targeting different segments of that growing market at K 2013.

The Kalix 3000 high-performance polyamide (HPPA) series is based on an entirely new molecule, according to Tom Wood, senior vice president and head of crystalline polymers for the firm. It is Solvay SP's first line of bio-based, amorphous polyphthalamides (PPA). One of the key raw materials for the series is a renewably sourced material from sister company Solvay Novecare.

Wood referred to the new resin as "homegrown," noting it was developed in India, scaled up at the company's research and development site in Alpharetta, and is being compounded in Changshu, China. The 3000 base material is to be made in Augusta, Ga. The new line was born out of one the monomers that came to Solvay as part of its 2012 acquisition of France's Rhodia SA, he said.

"The launch of the industry's first bio-based amorphous PPA is a major breakthrough," Wood said, "because it extends the performance profile of bio-based polyamides."

The two new grades — Kalix 3850 and Kalix 3950 — are said to provide less warp, reduced shrinkage and low to no flash. This improved processability results in tighter dimensional tolerances and more cost-effective manufacturing due to fewer secondary operations such as deflashing.

The Kalix 2000 series is a family of bio-sourced, semi-crystalline grades that is based on existing polyamide 6.10 technology, but which offers improved impact resistance. The new grades of Kalix 2855 and Kalix 2955 provide strong mechanical properties, high impact, exceptional surface finish, and low moisture absorption, according to Solvay SP. These two compounded grades consist of 27 percent renewable content.

Meanwhile, the company also introduced the halogen-free, flame-retardant Kalix HPPA 5000 series. The first grade — Kalix 5950 HFFR — extends Solvay's HFFR nylon portfolio. The new material is said to be particularly suited for injection molding larger structural components used in laptops and tablets that require strength, rigidity and exceptional dimensional stability.

Simply put, Wood said in an Oct. 16 interview on his firm's K stand, the mobile electronics industry's goals for its resins are "stiff and pretty."

"In the past five years," Wood said, "there has been a bit of renaissance in the larger polyamide world," with Solvay and other firms developing new nylon materials to meet this high-growth sector of telecommunications and personal electronics. However, he noted, "more materials are created than are commercialized."

Additionally, just in the past few years, the smart-device makers are starting to demand renewable content for the high-visibility consumer products.

When asked about pricing, Wood said the new grades would likely cost between 8 and 15 euros per kilo.

"These are specialty polymers," he said; "we are not competing in the midrange."


Comments

Solvay rolls out resins for mobile devices

By Robert Grace
Associate Publisher & Business Development Director

Published: October 18, 2013 2:13 pm ET
Updated: October 18, 2013 2:25 pm ET

Post Your Comments


Back to story


More stories

Image

'Thermoforming has nearly limitless possibilities'

April 18, 2014 12:54 pm ET

Julie McAlindon of PolyOne Corp. speaks about the future of thermoforming and the integration of Spartech Corp.    More

Image

Ascend targets nylon for auto applications, opening propylene monomer unit in Texas

April 18, 2014 10:57 am ET

Materials firm Ascend Performance Materials Inc. is in full operation at its new nylon 6/6 compounding line in Florida and will break ground by the...    More

Dutch company launching $100 million PP, PE recycling plant

April 18, 2014 10:42 am ET

Quality Circular Polymers is building a new plastics recycling operation in Geleen, the Netherlands' Chemelot industrial chemical site, with a...    More

Lumena suspends trading, delays report amid claims of 'misrepresenting' financials

April 18, 2014 10:19 am ET

China Lumena New Materials Corp., which says it has the world's largest manufacturing capacity for polyphenylene sulfide resin, has suspended its...    More

PolyQuest spins off FiberQuest unit

April 18, 2014 10:14 am ET

PolyQuest Inc. has spun off its FiberQuest unit — which distributes polyester staple fibers and cotton — as a separate company.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events