BASF boosts automotive market lineup

By Frank Esposito
Senior Staff Reporter

Published: October 18, 2013 1:51 pm ET
Updated: October 18, 2013 2:01 pm ET

Related to this story

Topics Nylon 6/6, Polystyrene, Polyurethane, Materials Suppliers, K 2013, Business News & Features
Companies & Associations BASF Corp., BASF SE

LUDWIGSHAFEN, GERMANY — BASF SE (Hall 5/C21) is bringing a reorganized plastics business and a host of new materials and applications from across the engineering resins spectrum to the K 2013 show.

The reorganization went into effect early this year and now includes four units: performance materials (including epoxy, nylon, polyurethane), monomers (including toluene di-isocyanate), intermediates (including amines) and petrochemicals (including other plastics).

The changes will help BASF grow in its strong automotive market, as well as in up-and-coming sectors such as wind power and bioplastics, board Vice Chairman Martin Brudermüller said at a pre-K press event at the firm's headquarters in Ludwigshafen.

"We always want to be 2 percent ahead of the market, and act accordingly when we find the right solutions," Brudermüller said.

Recent BASF growth initiatives highlighted by Brudermüller included increasing expanded polystyrene capacity in Ludwigshafen, as well as opening a new plant with almost 700 million pounds of capacity for PU feedstock TDI there in 2014.

New BASF materials can contribute to lightweighting in vehicles, which then creates fuel savings, performance materials President Raimar Jahn said high-performance composites increasingly are being used in auto body and chassis applications.

"Innovation can be great fun if you have a broad range of material to work with," Jahn said.

In plastic additives, BASF just opened a 35 million-pound-capacity plant making customer-specific blends in Bahrain. The unit also is making Joncryl-brand additives at a plant in McIntosh, Ala. That material can repair split polymer chains in PET recycling, officials said.

The lineup of new materials at K 2013 in Düsseldorf includes :

* Ultracom-brand composites, made from Ultramid-brand nylon and continuous fibers. The first high-volume auto components made from Ultracom will be on display at the show, engineering plastics lightweight team head Andreas Wollny said. The material already has been used in seats in Opel Astra vehicles.

* High-temperature-resistant grades of Ultramid for extrusion blow molding, allowing for the production of pipes from the material. The material offers better performance than polypropylene, according to automotive market development executive Martin Volker. The new grades now are available in sample amounts, but will be sold in commercial volumes after the show, he said.

* Flexible Ultramid grades for extruded pipe and tubing in automotive and gas applications. One grade is targeted at liquid conveying at high temperatures, while another is intended for vacuum and vent lines, according to automotive product development executive Matthias Scheibitz. The materials offer good stress cracking performance, low water absorption and good chemical resistance, Scheibitz added.

* A new grade of Ultradur-brand polybutylene terephthalate for fiberoptic cables, allowing for the handling of increased Internet traffic. The cables can contain up to 12 fibers and can protect against kinking and crush resistance, said universal business development executive Simon Kniesel.

* A new hydrolysis-resistant Ultradur PBT for auto electronics. The material can be used in plugs, connectors and housings, electrical/electronic business development executive Peter Eibeck said. Grades that are 15 and 30 percent glass-filled are available. They offer long service life under intense conditions, Eibeck added.

* New Elastostat-brand TPU compounds with anti-static properties to prevent failure of electronic components or ignition risk from gases and dust. The new grades are easy to process and can be used in intermediate bulk containers or large bags for combustible liquids or dusty goods, PU elastomers sales specialist Anja Oltmanns said. They also can be used in pipelines, hoses and conveyor belts.

BASF ranks as one of the world's largest makers of chemicals, specialty plastics and plastic additives. The firm employs more than 110,000 worldwide and posted sales of almost $94 billion in 2012.


Comments

BASF boosts automotive market lineup

By Frank Esposito
Senior Staff Reporter

Published: October 18, 2013 1:51 pm ET
Updated: October 18, 2013 2:01 pm ET

Post Your Comments


Back to story


More stories

Image

Americhem beats weather woes at start of 2014 for good fiscal year

November 26, 2014 9:45 am ET

Gains from the automotive and construction markets provided a strong fiscal 2014 for Americhem Inc.    More

Image

Dow reaches agreement with Third Point

November 21, 2014 9:11 am ET

Dow Chemical Co. has reached an agreement with the investment firm that has been trying to force the company to sell off some assets.More

Image

Ineos making its UK shale play

November 21, 2014 9:29 am ET

Chemical giant Ineos Group AG is planning to be the biggest player in the United Kingdom's shale gas industry.    More

Image

Total to buy majority stake in Polyblend

November 20, 2014 10:04 am ET

French oil and gas giant Total SA will buy a 68 percent stake in Germany's Polyblend GmbH, a subsidiary of Polymer-Chemie GmbH.    More

Chase Plastics building new Indiana distribution center

November 18, 2014 11:13 am ET

Resin distributor Chase Plastics will invest $5.4 million to build a new distribution center in South Bend, Ind.    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events