Trexel, 3M team up to cut part weight

By Rhoda Miel
News Editor

Published: October 18, 2013 1:41 pm ET
Updated: October 18, 2013 1:59 pm ET

Related to this story

Topics Automotive, Nylon 6/6, Polypropylene, K 2013, Business News & Features
Companies & Associations 3M Co.

DÜSSELDORF, GERMANY — Both Trexel Inc. (Hall 13/B46), with its MuCell microcellular foaming technology, and 3M (Hall 5/B10), with its glass beads, have proved they can reduce weight for plastic parts.

Now the two companies are working together to combine both systems and reduce the weight of injection molded parts by as much as 20 percent.

"It's as if for every five parts, one of them is free," said Charles Buehler, a General Motors Co. materials specialist who has experimented with using the combination of processes.

GM has been testing the potential for both glass beads and MuCell, using glass-filled poly¬propylene and glass-filled nylon. The nylon tests have used recycled nylon and virgin material. Engineers for the Detroit-based automaker have been testing parts in prototyping facilities at Proper Group International Inc. in Warren, Mich. The sites are set up to allow molders and their customers to test Trexel's processing.

Automakers including GM have approved parts for the past few years to reduce weight on their cars, which improves fuel performance. They are also now designing for MuCell from the start, rather than bringing the process in just before the start of production.

"We were looking at beads and we were looking at MuCell when we said, 'Let's put these babies together and see what happens,' " Buehler said.

On one part, the engineers could see an 8 percent reduction in weight by using MuCell alone, but up to double that with glass beads.

"Used alone, 3M glass bubbles or Trexel's MuCell can realize from 8-10 percent reduction in weight while maintaining mechanical and physical properties," said Doug Rowen, global business director for 3M glass bubbles. "Combined, the technologies complement each other, resulting in significantly increased weight reduction, cycle time reductions and improved dimensional stability of finished parts."

During testing, the systems together make it possible to improve part properties. Glass beads give the part strength, Buehler said, while MuCell helps the part retain impact performance.

Warp and sink is significantly reduced, while cycle time improves, reducing both scrap rates and production costs, he said. Molders can also use smaller presses with reduced clamping force requirements.

"It's challenging to take weight out of plastic parts without sacrificing strength, durability or function," said Steve Braig, president and CEO of Trexel.

"Through this innovative approach, customers can speed up the process and significantly reduce weight while maintaining the part integrity."

GM's testing looked at a variety of interior, exterior and functional parts, including an engine beauty cover, according to Buehler.

The carmaker has not established any material specifications at this time, but instead will be judging the potential for use in production parts through the ability to meet performance requirements.

"Typically everybody asks for the specs going forward, but we're going to be looking at the properties," he said.


Comments

Trexel, 3M team up to cut part weight

By Rhoda Miel
News Editor

Published: October 18, 2013 1:41 pm ET
Updated: October 18, 2013 1:59 pm ET

Post Your Comments


Back to story


More stories

Image

Lund adds to aftermarket auto products portfolio with buy of Bushwacker

January 29, 2015 2:49 pm ET

Lund International Inc. has expanded its portfolio of plastic aftermarket vehicle accessories by acquiring Bushwacker Inc.    More

Image

Plastics News Now: Losing weight with style, plastics in the Dragons' Den

January 29, 2015 6:00 am ET

A 19-year-old entrepreneur brings business to a U.K. injection molder after winning support on TV's Dragons' Den, auto suppliers combine...    More

Image

Plastics help Volt hit new target

January 28, 2015 1:54 pm ET

The 2016 Volt, unveiled at the North American International Auto Show in Detroit in January, features a sportier exterior design — GM calls it...    More

Image

Bain buying TI Automotive

January 27, 2015 8:49 am ET

After months of speculation, Auburn Hills, Mich.-based TI Automotive Ltd. entered into an agreement Tuesday to be acquired by private equity firm...    More

Image

Auto industry on the hunt for new lightweight materials

January 26, 2015 4:03 pm ET

The auto industry is focusing on lightweighting, and this is igniting a race to find new materials that can meet ever-changing performance needs of th...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events