China's Jinming looks at German R&D base

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: October 25, 2013 1:37 pm ET
Updated: October 25, 2013 1:41 pm ET

Image By: Steve Toloken Kelvin Wang

Related to this story

Topics Machinery, K 2013, Business News & Features
Companies & Associations Davis-Standard LLC

Chinese extruder maker Guangdong Jinming Machinery Corp. is considering starting a German research and development center to internationalize its product development, two months after announcing a sales partnership with U.S.-based Davis Standard LLC.

Jinming also earlier this year doubled its manufacturing capacity to about 300 extrusion lines a year by opening a new $50 million facility at its Shantou, Guangdong province, headquarters, according to Kelvin Wang, vice general manager and board member, in an interview at the K fair in Germany.

The company wants to globalize its business, and sees a new research and development base as an important step, Wang said.

Jinming plans to build the new research facility in either Germany or China, but it recognizes that it could be more difficult to bring engineers and researchers from other countries to live in China, he said. It wants to have the new R&D center up and running by the end of 2014, he said.

Jinming has watched how a German base has helped China's largest plastics machinery maker, Haitian International Holdings Ltd.

"We also consider like Haitian to establish a partnership outside of China," Wang said. "Jinming is known as a very successful Chinese manufacturer of blown film. The next step is to bring more technology and value to the machine while maintaining the lower cost."

Wang said the company wants to build up its reputation in world markets.

"You have to be known," he said. "If you are a question mark, no one will buy from you. As a blown film maker, we are relatively young."

The public company was established in 1987, and has sales of about $45 million a year, Wang said. About 70 percent of its business is in China, with its major export markets being the Middle East, Southeast Asia and recently, Japan, he said.

At its booth at the K fair, held Oct. 16-23 in Düsseldorf, Germany, it was showing a five-layer polyethylene blown film extrusion line, with a maximum roller width of 1700 millimeters.

"We are not saying we have the best technology for blown film in the world, but we believe we have cost advantages," he said.

The company sees opportunities to sell its machinery through the partnership with Davis-Standard and that company's global sales force, Wang said.

The two companies signed an agreement in August to represent each other's machinery in their markets, with Davis-Standard becoming the exclusive distributor of Jinming's blown film lines in Europe, Africa, Australia/New Zealand, and the Americas.

Wang said the companies are not integrating their technologies but the agreement could be expanded beyond sales in the future.

In an interview in the Jinming booth at the show, an executive with Pawcatuck, Conn.-based Davis-Standard declined to comment on what might be the next steps, if any, in the partnership, noting that it was only finalized two months ago.

Thomas Kennedy, vice president and general manager of blown film at Davis-Standard, said there were opportunities to sell Jinming equipment in "mid-range" markets.

Jinming said it has sold 1,000 extrusion lines in the last 25 years. Earlier this year it bought majority control of another extrusion equipment maker in Shantou, to expand into the equipment market for biaxially-oriented polypropylene, Wang said.


Comments

China's Jinming looks at German R&D base

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: October 25, 2013 1:37 pm ET
Updated: October 25, 2013 1:41 pm ET

Post Your Comments


Back to story


More stories

Image

ATS goes global with acquisition of M+W Process Automation

September 10, 2014 2:49 pm ET

ATS Automation Tooling Systems Inc., a maker of factory automation systems in Cambridge, Ontario, has agreed to buy a German company M+W Process...    More

Image

Orenda says new pulverizer improves efficiency through cooling

September 10, 2014 1:41 pm ET

Orenda Automation Technologies Inc. will unveil a new pulverizer with new cooling technology at the Rotoplas conference for rotational molders, Oct....    More

Image

Material handing systems maker expanding Kentucky operations

September 9, 2014 1:47 pm ET

Intelligrated Inc., which makes material conveying and palletizing equipment for warehousing and distribution, and manufacturing, is expanding its...    More

Image

W. Amsler Equipment adds CNC capability

September 8, 2014 1:40 pm ET

RICHMOND HILL, ONTARIO — W. Amsler Equipment Inc. has added its first computer numerically controlled milling machine — a key investment...    More

Image

Auxiliary maker Piovan to start assembly operation in India

September 8, 2014 2:24 pm ET

MUMBAI — Italian auxiliary equipment manufacturer Piovan SpA is eying the growing auxiliary market in India, and now plans to start assembling s...    More

Market Reports

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events