TI Automotive: Plastic fuel tanks promise to take the hybrid heat

Dustin Walsh
CRAIN'S DETROIT BUSINESS

Published: October 28, 2013 9:27 am ET
Updated: October 28, 2013 9:31 am ET

Image By: TI Automotive TAPT opens the mold during the cycle to robotically insert fuel system components inside the tank, then closes it again to complete the molding and seal the tank.

Related to this story

Topics Automotive Blow Molding
Companies & Associations

AUBURN HILLS, MICH. — All roads lead to California — at least when it comes to the creation of a complex plastic fuel tank system called the Tank Advanced Process Technology.

In the 1990s, the Golden State's regulations on greenhouse gas emissions spurred a flurry of engineering advancements in North America and Europe to prevent vehicle emissions. Among the areas of innovation: fuel tanks.

Auburn Hills-based TI Automotive Inc. recently launched its newest innovation, the Tank Advanced Process Technology, at its plant in Rastatt, Germany, to supply the Daimler AG S class, including the Mercedes-Benz S-500 plug-in hybrid.

The use of a plastic fuel tank in a hybrid is a differentiator for TI, since most hybrids use steel tanks because of the intense heat from lithium-ion battery packs, said Al Deane, chief technology officer for TI Automotive.

TI Automotive's TAPT opens the mold during the cycle to robotically insert fuel system components inside the tank, then closes it again to complete the molding and seal the tank. Other fuel tank makers use similar in-mold placement of components during blow molding.

The process provides TI a threefold benefit, Deane said.

The stiff, pressurized tanks are heat-resistant, allowing the tanks to be used on hybrids and electric vehicles for the first time. Also, because the tanks are sealed while still hot and use no external sealing hardware, vapor points are eliminated — good for the environment and emissions standards.

Another benefit, Deane said, is the process can be done on existing blow-molding machines, cutting costs for TI Automotive.

"The shape of cars keeps changing due to the different powertrains (standard, hybrid, electric, etc.)," Deane said. "The complexity of tanks has become much higher, and it's expensive to make many different tanks on many different machines."

Because TI Automotive can create fuel tanks of multiple shapes, sizes and complexities all on one machine, it's prepared to offer the process on customers' global platforms, Deane said.

"Today, a plastic diesel tank would be made from one supplier and a steel tank with a different supplier; now that doesn't need to happen," he said. "TAPT lets us produce multiple types of fuel tanks for the different powertrains from one blow molder."

TI Automotive holds 20 patents around the world for the technology, which has been in development since 2008, Deane said.

TI Automotive's Rastatt plant will produce 300,000 units in the first year, but more contracts are on the way.

The technology was developed for the European market in Germany, but engineers from Auburn Hills are developing tanks for the North American market standards. The supplier has development contracts on the technology with a U.S. and a Japanese automaker, Deane said.


Comments

TI Automotive: Plastic fuel tanks promise to take the hybrid heat

Dustin Walsh
CRAIN'S DETROIT BUSINESS

Published: October 28, 2013 9:27 am ET
Updated: October 28, 2013 9:31 am ET

Post Your Comments


Back to story


More stories

Image

Improvements to Radici's nylon line takes it into more applications

March 27, 2015 9:00 am ET

Radici Group, the Italian-headquartered materials firm, outlined the benefits of its Radilon and Radistrong nylon products at NPE 2015.    More

Image

DuPont exec: Still lots of lightweighting needed in the auto industry

March 23, 2015 6:00 am ET

In that role, Jeffrey Sternberg is responsible for bringing the breadth of DuPont advanced materials — as well as renewably sourced materials...    More

Image

How Faurecia made over a relic

March 23, 2015 6:00 am ET

Everything about Faurecia SA's interior trim plant in Saline, Mich., is big.    More

Image

Magna investing $135 million for new exteriors plant in Mexico

March 18, 2015 5:04 pm ET

Magna International Inc has started construction of a $135 million automotive exteriors manufacturing facility in Querétaro, in central Mexico.    More

Image

Auto supplier Visteon seeking new CEO

March 17, 2015 10:04 am ET

Visteon Corp. said Monday CEO Tim Leuliette will step down by the end of the year.    More

Market Reports

Flexible Packaging Trends in North America

North America represents about 30 percent of the global consumption of flexible packaging. Annual growth in this region is forecast at 4 percent during the next 5 years.

For more insight on growth opportunities, drivers of growth and the outlook for 2015, download this report.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events