AERT recovering from July fire, planning to launch capstock product

By Catherine Kavanaugh
Staff Reporter

Published: November 8, 2013 3:18 pm ET
Updated: November 8, 2013 3:20 pm ET

Related to this story

Topics Sustainability, Construction, Deck & railing, Extrusion, Pipe/Profile/Tubing, Recycling
Companies & Associations Advanced Environmental Recycling Technologies Inc.

Advanced Environmental Recycling Technologies, Inc. will be out with its first capstock products early next year as the Springdale, Ark.-based company rebounds from a deadly fire that caused an estimated $7 million of damage.

The July 17 blaze at AERT’s Springdale facility killed one worker, injured two others, and took four of the five extrusion lines out of commission for the manufacturer of wood-plastic composite (WPC) building products.

Lost production contributed to a $3.1 million drop in quarterly sales compared to the same period a year ago, according to earnings results released Nov. 8. AERT reported sales of $14.7 million for the quarter that ended Sept. 30.

“What is not reflected in the financials is the impact on the individuals hurt in the incident, their friends and families, our neighbors and all of our associates. We keep all of the affected in our thoughts every day,” AERT CEO Tim Morrison told investors in a conference call.

Production at the plant was halted for about a month and all the lines still have not been restored to full capacity. Final adjustments and repairs continue.

AERT also has installed a new production line for capstock products, which have durable, lower-maintenance outer layers.

“We have undertaken research for the past few years to develop capstock technologies that we believe will be unique in the industry,” Morrison said.

The CEO said he believes it’s important the industry learn from its mistakes and not rush untested product to the market.

“In the past, competitors’ efforts to reduce the cost of WPCs left poor-quality boards, failed product and a poor reputation for WPC in general,” he said.

Although competitors have been abandoning their WPC offerings for capstock, Morrison said he believes both have a place in the market. AERT will continue to make WPC into the foreseeable future.

“It’s important to remember that a capstock will only be as good as the core WPC structure,” Morrison said.

AERT has been using recycled polyethylene and wood fiber waste to make outdoor decks, fences and door and window components since 1989. The company is the exclusive manufacturer of the colorful ChoiceDeck line of products sold by Lowe’s.

“We are excited to continue to partner with Lowes and believe that new approaches to that channel will facilitate growth in sales,” Morrison said, noting the home improvement retailer has 1,700 stores.

The CEO said he has a positive outlook for AERT as the company recovers physically, emotionally and fiscally from the July fire.

AERT’s insurer advanced the company $2.5 million in early October but a settlement has not been reached. The full financial impact of the fire is estimated to be $7 million.

Operating income fell $4 million in the quarter ending Sept. 30 — compared to the same period in 2012 —primarily due to lost production and sales. The insurance advance, which was recorded as other income, helped reduce the net loss to $1.1 million. AERT had posted net income of $500,000 in the third quarter of 2012.

Although the fire kept AERT from meeting its financial goals for the quarter, Morrison said, “Our business, however, is quite healthy and we anticipate getting back on the constant-improvement track in the fourth quarter.”


Comments

AERT recovering from July fire, planning to launch capstock product

By Catherine Kavanaugh
Staff Reporter

Published: November 8, 2013 3:18 pm ET
Updated: November 8, 2013 3:20 pm ET

Post Your Comments


Back to story


More stories

Image

Plastics help Volt hit new target

January 28, 2015 1:54 pm ET

The 2016 Volt, unveiled at the North American International Auto Show in Detroit in January, features a sportier exterior design — GM calls it...    More

Image

FPI joins curbside recycling group

January 28, 2015 11:47 am ET

Foodservice Packaging Institute is joining the board of the Curbside Value Partnership, a non-profit group that works to improve curbside recycling...    More

Image

Agricultural container recycling grows

January 28, 2015 11:42 am ET

Plastic pestitcide container recycling shot up by nearly 40 percent last year, according to new statistics from the Virginia Department of...    More

Image

PC used in academy roof retrofit

January 28, 2015 8:55 am ET

Polycarbonate sheet meets the demands of a “living roof” in a retrofit at the California Academy of Sciences in San Francisco.    More

Image

Linder showing HDPE recycling system

January 28, 2015 11:08 am ET

Lindner washTech GmbH will show its technology for washing and drying shredded post-consumer plastic, at its NPE 2015 Booth S26189.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events