Japan's injection press sales see rebound

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: November 15, 2013 12:06 pm ET
Updated: November 15, 2013 12:07 pm ET

Related to this story

Topics Machinery, Asia

DONGGUAN, CHINA — Japan’s injection molding machinery industry is seeing signs of a rebound because of a weaker yen and stronger demand in both North America and Japan, with production this year possibly topping 15,000 presses, the head of the country’s plastics machinery trade association said.

There are some dark clouds, including a tougher business environment that’s squeezing profit margins, but the industry overall looks poised to see gains in production this year at its factories both in Japan and outside the country, according to Hozumi Yoda, chairman of the Tokyo-based Association of Japan Plastics Machinery.

Japan has one of the world’s largest plastics machinery industries, and typically sells higher-tech – and higher-priced – machines, so a good year could bode reasonably well for worldwide demand.

Yoda projected that production within Japan will hit 12,000 injection molding machines this year, up from 11,500 in 2012, while production in the industry’s factories outside Japan will probably be about 3,600 machines, a sizable increase.

“We see signs of a recovery,” he said, although he added it was a modest uptick. “The auto industry is recovering.”

Yoda, who is also president of Nagoya, Japan-based Nissei Plastic Industrial Co. Ltd, spoke during an interview at the Dongguan International Plastics, Packaging and Rubber Exhibition, or DMP trade fair, held Nov. 13-16 in the southern Chinese city of Dongguan.

Notably, the figures suggest a solid pickup in Japanese press sales in the second half of the year. The first six months of 2013 saw Japan’s industry make 5,300 machines, Yoda said, but projections call for nearly 7,000 in the second half of the year.

The recovery is also helped by gains in some export markets in the first half of the year, particularly to the United States, South Korea, Vietnam and Mexico. On the other hand, China, the largest export market for Japan’s IMM industry, struggled, Yoda said.

In the first half of 2013, Japanese IMM exports to the United States rose almost 60 percent in yen terms, to 9.51 billion yen ($96.1 million), or about 28 percent in dollar terms, compared to the first half of 2012.

The increase to the U.S. was led by strong sales to the automotive and medical industries, and pushed that country to be the second-largest export market for Japan, Yoda said.

Exports to Mexico also jumped, more than doubling in yen terms, to 2.48 billion yen, according to Japanese government statistics in the November issue of The Plastics Times of Japan magazine, provided by Yoda.

Exports also roughly doubled to both South Korea and Vietnam. Overall, the export gains reflect a Japanese yen that has fallen more than 30 percent against the U.S. dollar since late 2011, making Japan’s industry more competitive globally.

Japan exports about 60 percent of its plastics machinery.

For China, exports plummeted from 16.2 billion yen in the first six months of 2012, to 11.5 billion yen this year, however.

Some of that drop could be because Japanese machinery companies are building more factories in China and can therefore meet demand from within the country, but Yoda also said it also reflects caution among Chinese factories and slow sales there.

Exports to Thailand fell way back, less than half of what they were in 2012, dropping that country from the top export destination in 2012 to number three in the first six months of this year.

Yoda said that reflected the end of the rebuilding boom that happened after Thailand’s industry was forced to replace thousands of machines lost in devastating floods in 2011.

Japan’s injection press industry has been rapidly expanding in other countries in recent years in a bid to lower its costs and better compete in emerging markets. Companies have added production in China and Thailand, and last year, in India, when Toshiba Machine Co. Ltd. bought Indian press maker L&T Plastics Machinery Ltd.

Nissei, for example, opened a factory in Thailand this year and is starting to build a second factory in China that will triple its production capacity there when it opens next year, Yoda said.

Still, even with the sales boom, he said Japan’s plastics equipment industry is seeing profit margins suffer. JPMA statistics show that profits for Japan’s plastic machinery makers were down 30 to 50 percent in the six months from April to September this year, he said.

There is more demand within Japan for machinery, helped by more infrastructure spending, but it’s not necessarily translating to higher profits for the industry, he said: “While stock prices may be higher, banks and stock companies make money, but not manufacturers.”

Yoda said he felt that Japanese companies were maintaining their dominant market share in the important all-electric machine market in China, because Japanese machines are only a little more expensive than their Chinese competitors but offer much better performance.

“The Japanese balance of price and performance is very good,” he said.


Comments

Japan's injection press sales see rebound

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: November 15, 2013 12:06 pm ET
Updated: November 15, 2013 12:07 pm ET

Post Your Comments


Back to story


More stories

Image

Trade group lists China's top plastics machinery manufacturers

August 15, 2014 9:58 am ET

The China Plastic Machine Industry Association has unveiled its latest rankings of the top 25 plastics machinery suppliers in China as well as...    More

Image

Wittmann Battenfeld adding machining center in Austria

August 15, 2014 9:42 am ET

Austrian injection molding and auxiliary equipment machinery company Wittmann Battenfeld GmbH is already increasing capacity of the new assembly hall ...    More

Image

Euromap designs machine energy efficiency label

August 15, 2014 9:38 am ET

A European trade group has designed a new standardized label that shows the energy efficiency class of plastics processing machinery.    More

Image

Italian machinery companies combine forces to market in North America

August 14, 2014 2:48 pm ET

A trio of Italian plastic machinery companies has formed a network and is retaining Alliance Automation LLC to market their products in the United...    More

Image

LCY halts PP production; politicians resign following fatal blasts

August 11, 2014 4:45 pm ET

LCY Chemical Corp. has halted polypropylene production in the wake of propylene gas explosions that killed 30 in Taiwan on July 31.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events