Official: China's car industry needs cooperation, government support to boost use of lightweight plastics

Rebecca Kanthor
PLASTICS NEWS CORRESPONDENT

Published: November 25, 2013 2:55 pm ET
Updated: November 25, 2013 3:00 pm ET

Image By: Rebecca Kanthor Cao Du, the executive chairman of the International Green Auto Lightweight Technology Alliance and a research executive at Chinese car maker Chang'An

Related to this story

Topics Sustainability, Automotive

SHANGHAI — The head of a technology alliance focused on making cars in China lighter by replacing metals with plastics is calling on more cooperation between Chinese car companies and more support from the government to fully develop the market.

Cao Du, the executive chairman of the International Green Auto Lightweight Technology Alliance and a research executive at Chinese car maker Chang'An, told a recent industry forum that Chinese companies need to put more pressure on the government and work more closely with each other to share knowledge.

"Lighter cars are the key strategy for China and its automobile industry," he said in a speech to delegates at the International Auto Lightweight Plastics and Innovative Materials Development Forum, held Nov. 19-21 in Shanghai.

But Cao said the government favors the aeronautics industry over the car industry for composites materials research, and he also faulted industry for not sharing enough resources.

"The government is not conscious of the important role that composite plays in making lighter cars," Cao said in an interview with Plastics News.

He added that government-financed institutes do not provide detailed planning and investment in this area.

The technology alliance Cao heads includes global resin suppliers like Rhodia SA, DSM NV and Arkema, along with large Chinese car makers like Chang'An and Geely Holding Group Co. Ltd. The alliance is organized under the Shanghai-based Sino-European Union Chemical Manufacturers Association, which provides administrative support.

Cao is also vice president of Chang'an Automobile Group Co. Ltd.'s Global R&D Center in Chongqing, China.

At the forum, Cao called for original equipment manufacturers to encourage lightweighting and suggested they write a white paper on the subject.

By the end of the forum, he told Plastics News that informal talks between several of the companies resulted in an agreement to form a committee of OEM car makers to work together and share knowledge on lightweighting projects.

Four state-owned car makers plan to put together a proposal to the government to support the formation of this committee within the next few weeks, he said.

Cao said that in the OEM discussions, the group realized, for example, that almost all the participants were working on carbon fiber reinforced plastic hoods.

"We discussed why couldn't we share the technical difficulties and share the workload or share the achievements," Cao said. "That would be better. We haven't figured out the best way but what we discussed is based on the North American experience."

The new committee will work together and make future 5 year plans and assign workloads to different OEMs, he said.

Cao called the agreement a sign that the alliance is seeing greater participation by Chinese OEMs. He said in the past few Chinese OEMs made sample components making more use of plastics.

"This year, however, is different," he said. "Yet to make things happen we must [have] a comprehensive chain of industry. The good news is that some general manufacturers are working with… suppliers and have made some achievements."

He said that while the gap in the use of plastics between Chinese and foreign-made cars remains, with many Chinese cars using 30-40 kg (66-88 lbs.) less plastic per car, it is an optimistic time for the IALTA alliance.

"Clearly, we are lagging behind. Yet I think it is relatively easy for us to bridge gap and this is what we should do now because OEMs are located in China and the materials they use are also from China," he said. "We should replace steel with plastic composites that have been ignored by us in past production."

"Lightweight cars are inevitable," he said. "We must take this road or we will be left behind."

China has led the world in car production for the last five years, and should seize the opportunity to move forward in the technology, he said.

"Not only should the government support lightweight cars but also the whole industry should form a vigorous chain of industry," he said. "When we act as one, we will have greater say and in turn win the government's support."


Comments

Official: China's car industry needs cooperation, government support to boost use of lightweight plastics

Rebecca Kanthor
PLASTICS NEWS CORRESPONDENT

Published: November 25, 2013 2:55 pm ET
Updated: November 25, 2013 3:00 pm ET

Post Your Comments


Back to story


More stories

Image

Dunkin' Donuts looking at PP to replace foam cups

September 19, 2014 3:22 pm ET

Dunkin' Donuts is testing a new polypropylene coffee cup that the company believes could help boost recycling.    More

Image

Plasan investing in capacity, jobs to supply auto market with carbon fiber

September 19, 2014 3:05 pm ET

Growth in the emerging automotive market for carbon-fiber composites has spurred a $29 million investment in a Walker, Mich., factory    More

Image

Toyoda Gosei expanding in Mexico

September 19, 2014 2:33 pm ET

Toyoda Gosei North America Corp. is investing $67 million in a 398,000-square-foot plant in central Mexico to supply the automotive industry with...    More

Exo-s buys injection and blow molder in Mexico, expands footprint

September 19, 2014 2:15 pm ET

Custom molder Exo-s Inc. has bought an injection and blow molding operation in San Juan del Rio, Querétaro, Mexico.    More

Image

Study: 75 percent of Australia's ocean debris is plastic

September 18, 2014 7:48 pm ET

About 75 percent of the trash found in the waters off Australia's beaches is plastic, with most of that coming from local sources rather than sea-born...    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events