Cogeneration plant aimed at making Sabic more energy efficient

By Frank Esposito
Senior Staff Reporter

Published: December 3, 2013 3:36 pm ET
Updated: December 4, 2013 5:18 pm ET

Image By: Sabic Innovative Plastics The Mount Vernon plant was opened in 1960 by GE Plastics.

Related to this story

Topics Materials, Sustainability, Materials Suppliers
Companies & Associations Sabic Innovative Plastics

Sabic Innovative Plastics is making a major infrastructure investment at its production site in Mount Vernon, Ind.

Sabic plans to build a cogeneration plant in Mount Vernon that will use natural gas to produce a majority of steam used at the site. Currently, Sabic IP uses coal boilers to generate about 40 percent of the site's steam. The new co-gen plant will address Environmental Protection Agency standards as well as offering an economical and sustainable solution, officials with Pittsfield, Mass.-based Sabic IP said in a Dec. 3 news release.

The firm also is investing in new technology at the Mount Vernon site that will increase the location's production efficiency by 20-30 percent. The new technology will use less steam and electricity and also will improve the site's competitive position, officials said.

The investments are the largest made in Mount Vernon in the last 30 years, plant manager Joe Castrale said in the release. They also "are in-line with our commitment as a business to serving our customers and supporting the communities where we operate," he added.

The new technology is expected to be in place by 2015. No date was provided for the opening of the co-gen plant. The projects are expected to create 150-200 temporary construction jobs.

The co-gen plant is expected to open in 2017. No cost estimate for that plant or for the technology investment was available.

"These investments demonstrate [Sabic IP's] commitment to being the preferred supplier of engineering thermoplastics, while continuing to pursue its ambitious sustainability objectives," manufacturing vice president Mike Walsh said in the release.

The Mount Vernon plant was opened in 1960 by GE Plastics, which was acquired in 2007 by Saudi Basic Industries Corp., the parent company of Sabic IP. The site is Sabic's largest U.S. manufacturing facility, employing 1,200 and producing Lexan-brand polycarbonate as well as other engineering resins and compounds.


Comments

Cogeneration plant aimed at making Sabic more energy efficient

By Frank Esposito
Senior Staff Reporter

Published: December 3, 2013 3:36 pm ET
Updated: December 4, 2013 5:18 pm ET

Post Your Comments


Back to story


More stories

Image

China's plastics industry making a shift

January 27, 2015 3:41 pm ET

China's plastic industry is in the midst of a “profound adjustment” from large-scale and high-speed growth to growth focused on quality,...    More

Image

Citadel opens second compounding facility in China, near Shanghai

January 27, 2015 3:22 pm ET

Citadel Plastics Inc., the American manufacturer of thermoplastic and engineered composite compounds, has opened its second facility in China,...    More

Image

Sales, profit fall at DuPont

January 27, 2015 3:13 pm ET

Materials giant DuPont Co. will use almost all of the proceeds from an upcoming spinoff — one that includes its fluoropolymer and titanium...    More

Image

A. Schulman, Citadel continue buying blitz

January 27, 2015 11:32 am ET

A. Schulman Inc. and Citadel Plastics Inc. — two deal-happy materials firms — were at it again in the second half of 2014.    More

Image

It's becoming a seller's market for plastics firms

January 27, 2015 11:37 am ET

The pace of plastics mergers and acquisitions activity slowed a bit in the second half of 2014 — but market watchers have high expectations for ...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events