As toolmaking in China changes, Cosmos moves factory, focuses on technology

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: December 6, 2013 12:36 pm ET
Updated: December 6, 2013 12:55 pm ET

Image By: Cosmos Tooling Solution Ltd. Cosmos Tooling moved into its Shaoguan, China, factory in May.

Related to this story

Topics Molds/Tooling, China

Cosmos Tooling Solution Ltd., an American-Chinese joint venture mold maker, has a problem common to many factories in China’s coastal manufacturing zones: keeping good staff in a place with rapidly rising wages and a transient workforce.

So it came up with a not-very-common solution. It picked up and moved its factory from Dongguan, a major mold making center with thousands of tool shops, 120 miles north to the smaller city of Shaoguan, where there are only a handful of similar firms.

The company settled into its new 20,000-square-foot factory in May. The move to Shaoguan, in northern Guangdong province, puts it in unfamiliar territory for a foreign-invested operation, away from the international supply chain and safety net clustered around Dongguan and neighboring Guangzhou and Shenzhen.

But general manager Hercules Shum said the company sees the 6 million Chinese yuan ($985,000) investment as giving it an advantage in dealing with worker churn, one of its big challenges.

Shaoguan is a city of 3.5 million people, overwhelmingly local residents, while Dongguan’s population of 8.2 million, according to city statistics, includes 6.3 million migrant residents who travel from elsewhere in China to work in its factories and businesses.

“The biggest reason for us to relocate is the loyal, stable, skilled workforce,” Shum said. “When we were at Dongguan, people come and go and no one wants to stay or work long term. Even when we provided all kinds of incentives to our staff, we could not keep them for long.”

There’s another, more personal, reason for choosing Shaoguan. Shum was born there, and his grandfather was a government official in Shaoguan in the 1940s, before he eventually died in prison during the country’s tumultuous Cultural Revolution.

Shum’s own father migrated to Hong Kong more than 30 years ago and eventually was able to bring his family, including Shum, there. But now the family is returning, and Shum has become a member of a Shaoguan city advisory board.

Cosmos is a small mold shop by Chinese standards, with about 70 employees and $2.5 million to $3 million in annual sales. Shum said that’s the way the company wants it.

The company is owned by Shum, three other Hong Kong investors and executives at two U.S. companies in Michigan, Wakefield-based mold maker Extreme Tool and Engineering Inc. and Swartz Creek-based mold designer Future Engineering Inc.

They say they prefer to focus on upgrading people and equipment rather than becoming a thousand-employee workshop.

China’s rising costs, while still much less than in the United States, are changing the game, Shum said. Adding to that, running labor intensive businesses will become more difficult as a long-term result of the one-child policy, Shum said.

At the same time, the company is facing more competition from manufacturing in the United States, known as reshoring, Shum said in a late November interview. Business slowed some in 2012, and the company thinks that’s part of the reason.

“In the old days we competed mostly with Chinese mold makers, but now we compete more with American mold makers,” Shum said. “Manufacturing is going back to the States.”

So Cosmos needs to continue its focus on being more efficient, he said. When the company started in 2008, it had 120 employees and $1.5 million sales. Since then, it’s cut its workforce almost in half and nearly doubled sales, he said.

It spends a lot more time on mold design before it cuts any steel. It buys more expensive, automated Japanese equipment, and takes steps it says are less common in China, like 100 percent inspection of electrodes in a mold.

It’s trying to adopt practices common in the factory of its partner, Extreme Tool. Extreme President Mike Zacharias is the largest shareholder in Cosmos, and provides guidance in how the company can automate, Shum said.

“Mike shared with us what happened with mold making in the U.S. in the last 15 years,” Shum said. “He said ‘I was there 15 years ago. I know how tough it will be.’ We want to be as efficient as an American shop.”

Cosmos is overwhelmingly export-oriented, although in an interview in 2010, Zacharias and other company executives said they saw potential selling molds to domestic Chinese companies.

That has not developed as quickly as they’d hoped, Shum said, because the local market will not pay the higher prices of export molds. That could take five years to change, so the company remains focused on the international market, Shum said.

In the meantime, the company will continue to work on being lean.

“We never want a big operation,” he said. “The mold making we are doing is very different from other mold making shops.”


Comments

As toolmaking in China changes, Cosmos moves factory, focuses on technology

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: December 6, 2013 12:36 pm ET
Updated: December 6, 2013 12:55 pm ET

Post Your Comments


Back to story


More stories

Image

Hasco gets into augmented reality

October 17, 2014 6:00 am ET

Mold makers may be used to seeing cores and pins on the exhibition stand of a supplier — but not augmented reality that looks like it comes...    More

Image

China's Jushi to decide on US plant

October 13, 2014 3:04 pm ET

After two years of deliberations, Chinese fiberglass manufacturer Jushi Group Co. Ltd. is one step closer to opening a new factory on foreign soil.    More

Image

Linear takes additive manufacturing to new levels in tools, prototyping

October 10, 2014 4:20 pm ET

Additive manufacturing was a natural fit for Linear Mold & Engineering Inc.    More

Image

Kiefel boosts exposure to auto industry with tooling acquisition

October 9, 2014 10:07 am ET

German machinery company Kiefel GmbH, part of the Brückner group, has acquired Czech-based SWA sro, a company which provides compression, foaming and ...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events