California molder adds equipment, pursuing medical market

By Roger Renstrom
Correspondent

Published: December 10, 2013 4:00 pm ET
Updated: December 10, 2013 4:01 pm ET

Related to this story

Topics Medical Injection Molding Molds/Tooling Aerospace
Companies & Associations

A&S Mold and Die Corp. of Chatsworth, Calif., is installing its 47th injection molding machine — a hybrid-servo 950-ton Toshiba with a 250-ounce shot size — in December.

The custom injection molder and mold maker is moving into the market for disposable medical applications.

“We are thinking about building a formal clean room in the near future,” said President Arno Adlhoch. “I still have faith and hope in manufacturing in southern California.”

Adlhoch and his sister, Karen Adlhoch, co-own the business that their late father, Hugo, developed and operated. Arno deals with operations, and Karen handles human resource, legal and accounting functions.

Equipped with a Wittmann robot, the new Toshiba ISGT950WII-S has a special wide platen that is usually used on a 1,450-ton machine.

“We were turning away some business needing a larger press size,” Arno Adlhoch said. “To turn away business is very hard.”

Principally, A&S molds telecommunications racking systems, aircraft armrests, consumer housewares and drip irrigation components.

For an important aircraft program, “we started out machining blank shells for the armrests,” he said. “Our customer does the entire interior of the aircraft. Eventually, we added functions” including the molding of components of high-impact flame-resistant polycarbonate.

A&S gained the capability to process the required traceability paperwork for the U.S. Federal Aviation Administration certification. For that aspect, “we needed to upgrade our systems” in material requirements planning capabilities, Adlhoch said.

The A&S mold shop’s computer numerical control capabilities include a three-axis vertical machining center and a sinker electric discharge machine.

Depending on work load, A&S employs70-100 including four mold makers, and the firm occupies 50,000 square feet.

A&S operates Arburg vertical-capable presses for close-tolerance, insert-molding and smaller requirements starting at a clamping force of 22 tons. The firm has a rotary vertical Engel, numerous Toyos in the 500-ton range and another 950-ton Toshiba that was acquired about a decade ago.

“We have the first large Toyo sold in the States,” he said. Large, in this case, is relative at 145 tons.

Adlhoch projects 2013 sales being 15 percent higher than those in 2012. A&S withholds sales figures.

Hugo Adlhoch was born in Speyer, Germany, and trained as a mold maker apprentice at BASF SE before immigrating to Montreal at age 19. He moved his family to Santa Monica, Calif., and, in 1969 with short-time partner Fred Shapstau, founded a mold shop in Burbank, Calif. The business moved to Chatsworth in the mid-1970s and started injection molding for sampling with the smallest available Arburg. He died in August 2012 at the age of 74.

His son recalls that Hugo Adlhoch used lights-out injection molding before the advent of remote monitoring alerts and fixes. Before leaving the shop for dinner with his family, he would call home and set the phone next to the molding machine. His wife, Brigitte, would place the home phone receiver so the “ka-chunk” sound during each molding cycle was audible. If the ka-chunks stopped, Adlhoch would rush back to the plant to fix the problem.

 


Comments

California molder adds equipment, pursuing medical market

By Roger Renstrom
Correspondent

Published: December 10, 2013 4:00 pm ET
Updated: December 10, 2013 4:01 pm ET

Post Your Comments


Back to story

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 15, 2015 - September 17, 2015Plastics Caps & Closures - September 2015

More Events