Supply-chain collaboration, industry image are auto supply group leader's top tasks

Dustin Walsh
CRAIN’S DETROIT BUSINESS

Published: January 6, 2014 2:50 pm ET
Updated: January 6, 2014 2:52 pm ET

Related to this story

Topics Automotive
Companies & Associations Visteon Corp.

For the past three months, Original Equipment Suppliers Association founder Neil De Koker has been easing the reins of his organization into the hands of its new CEO, Julie Fream.

That transition now is over as Fream leads the organization solo, as of Jan. 1.

Fream, 49, a former Visteon Corp. executive, has held a variety of automotive manufacturing, sales and marketing jobs for the past 30 years.

In 1983, she joined General Motors as a manufacturing engineer, and subsequently worked for Ford Motor Co. and TRW Automotive Inc. as a program manager. She spent 14 years at Visteon, where she eventually managed the global marketing group.

Fream departed Visteon in 2011. Since then, she has served as a trustee of Michigan Technological University and Oakwood Healthcare.

Fream was interviewed by Crain's Detroit Business reporter Dustin Walsh in December to discuss the new role of suppliers and her vision for the OESA.

How did you end up here?

I've been in auto my whole career. I started in the early '80s working for General Motors. That was how I got my start. I actually grew up in Dearborn, and my father is a Ford retiree, so I've always been around vehicles.

For the OESA position, I was actually contacted by a recruiter. I was interested in doing something a little bit different ... finding ways to give back to the community. I had interviewed at other nonprofits, but when this position came along, because it was so tied into my own experience, I felt like this was a great opportunity ... to give back to the industry.

You've held a lot of different roles in the industry. How will those benefit you at the OESA?

I had time in marketing and communications ... a lot of time in sales as well. First of all, my time dealing with the OEs (automakers) and spending time connecting with suppliers and the media, all of that helps because it is all relationship-based. A lot of the work at OESA is relationship-based, and using the relationships I have and expanding them will be a huge part of what I need to do in leading the OESA.

What will be the first initiatives in 2014?

One is ensuring that we hold on to the transparency and the collaboration that has developed in the industry over the past few years through some of our biggest trials. I want to make sure as a trade association we promote this whole supply-chain collaboration and that we're talking about what we need to do to ensure that transparency as we move forward. I also believe we need to work on the image of the industry, to help retain and attract talent to the industry. ... We did our Generation Auto video (contest), and that's just a small beginning in terms of how we need to connect and communicate within the industry about what we do, (and) how challenging, fun and technical our work is.

(We need) to encourage not only young graduates to come, but also to encourage people to stay in the industry after they have a few years of experience.

Is the talent shortage still a problem?

What we're seeing is a real need emerge. There's been this rumbling that there's going to be this shortage of engineers. Now is the time to address that. I don't have all the plans in place at this point, but a huge part of it is going to be collaboration across many of types of organizations. ... I don't think any one organization can do this on its own. The challenge will be to bring the groups of people together ... and find the path that we can all work together on.

Where do universities and education come in?

One of things I personally do is sit on the board of control at Michigan Technological University. The connection and the understanding of the STEM (science, technology, engineering and mathematics) fields and what's happening on the education side in Michigan is something I also take part in. I'd like to begin to bridge that and see what we can do to better connect those.

What's the greatest challenge for the industry in 2014?

Capacity is the issue of the day. The challenge there is we are approaching a point where many suppliers are going to need to add significant investment -- whether that's in capital equipment or building infrastructure. So the transparency that needs to be from the OEs to the suppliers and the suppliers to the other tiers is very critical.

I really believe we have to have the open discussions and dialogue about longer-term plans. If we're not having those discussions more than just, "OK, we need it for the next year or 18 months," then we're going to revert back into a situation where perhaps we have too much capacity the next time the cyclical changes come through the industry.

Are there segments in the industry the OESA is missing?

We need to help some of the smaller suppliers and recognize that 70 percent of our membership is what you might consider smaller suppliers. We have to help them as they look to expand their businesses beyond either the U.S. or North America as they meet the demands of global platforms for these OEs. I think debt is one issue, which is why it's important they understand that the debt they are taking on is backed by long-term contracts. Also, it's the unknown of how to operate in an unknown foreign environment. What are the tax requirements? What are the regulations I have to follow? Educating and providing a way for our members to learn about that is critical.

One of the comments I've made to the team is that, as we look forward 15 years from now, the demographics of our business are going to be very different from now. In essence, the baby boomers will have retired. You're now looking at Gen Y, Gen X, millennials in the business. What does a trade association need to do to support them? These are all the things that OESA needs to look at and plan to look at as we move forward.


Comments

Supply-chain collaboration, industry image are auto supply group leader's top tasks

Dustin Walsh
CRAIN’S DETROIT BUSINESS

Published: January 6, 2014 2:50 pm ET
Updated: January 6, 2014 2:52 pm ET

Post Your Comments


Back to story


More stories

Image

Auto industry on the hunt for new lightweight materials

January 26, 2015 4:03 pm ET

The auto industry is focusing on lightweighting, and this is igniting a race to find new materials that can meet ever-changing performance needs of...    More

Image

Continental builds low-emission interior trim factory in China

January 26, 2015 12:33 pm ET

Benecke-Kaliko AG is making the largest investment in its history to build an environmentally friendly auto interior trim plant in China, prompted by ...    More

Image

Gurit wins carbon fiber auto contract using new processing technology

January 23, 2015 9:22 am ET

Switzerland-based composite materials group Gurit Holding AG has been selected as the supplier for carbon fiber based automotive body panels at a...    More

Image

ACC's 'Roadmap' gaining traction

January 22, 2015 1:56 pm ET

Nearly a year into the launch of the latest effort to promote greater use of plastics in automotive applications, a trade group behind the push says...    More

Image

Auto supplier Cooper-Standard to trim operations in Europe

January 22, 2015 11:08 am ET

Novi, Mich.-based Cooper-Sandard Holdings Inc. said Jan. 21 it plans to consolidate its operations in Europe, including reducing manufacturing in Fran...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events