Plastics assist designers with Chrysler 200 interior

By Rhoda Miel
News Editor

Published: January 13, 2014 5:15 pm ET
Updated: January 14, 2014 4:52 pm ET

Image By: Chrysler Group LLC Chrysler has replaced the standard shift lever to a rotary dial for the 200. That freed up space in the center console for more storage, as well as an area to pass through long objects from the back to the front of the car.

Related to this story

Topics Automotive, Materials, Design

DETROIT — Chrysler Group LLC’s 2015 200 sedan is intended to be a flagship for the company, showing what is capable in engineering and manufacturing.

That also holds true for its interior, said Klaus Busse head of interior design for Chrysler, noting that it an area where the company is using new developments in production alongside new ideas in design.

“Look at the way we used wood this time,” Busse said during an interview following the 200’s introduction Jan. 13 at the North American International Auto Show in Detroit.

Busse pointed to the curving shape of the wood trim surrounding the instrument cluster.

“It used to be that we could only use wood in simple shapes. This is one complex, free flowing design.”

That design is capable, he said, because of improvements in production and engineering.

Interior suppliers have been developing ways to use natural products — including a thin veneer of wood — as an aesthetic covering which is married to the plastic substrate.

Chrysler’s adoption of it in the 200 allows it to echo what Busse called the “American design language” of allowing materials to show their true face — like the curved plywood in an Eames chair or the aluminum skin of an Airstream trailer.

“But this is very difficult to do,” he said.

For the past few car development cycles, Chrysler has co-located both designers and engineers within the same team, so they can combine their ideas on new projects as quickly and simply as possible

“What that means is that when we having some complication come up, it’s very easy for us to get management together and say: ‘Let’s compare notes here. Let’s see what we can do.”

During the previous model for the 200, Chrysler’s designers and engineers — along with key supplier Faurecia SA — won the 2011 Vehicle Engineering Team Award from the Society of Plastics Engineers for their cooperative work.

The co-location for the 200 and the Dodge Avenger allowed the teams to develop the interiors within 12 months, which is a sprint for the auto industry.

“The decision-making process was greatly sped up,” said Jay Hutchins, director of marketing and product planning for Faurecia North America.

For the 2015 model year of the 200, the combination of engineering and design came to the fore not only for the trim, but within interior packaging.

Chrysler has replaced the standard shift lever to a rotary dial for the 200. That freed up space in the center console for more storage, as well as an area to pass through long objects from the back to the front of the car.

With that space, the materials engineers, design team and suppliers combined ideas for a space that feels far more solid than the storage in the previous models. Busse said the team wanted it to feel as solid as furniture, with firm closures.

Structural plastics along with key soft-touch panels and trim created an expanded space.

“With every car, they always ask you, ‘What did you have to compromise on?’ With this, we didn’t have to fight for anything,” Busse said. “We could share the vision of this car and spend our time on executing our vision, and not fighting.

“At the end of the day, the key is a partnership of engineering and design.”


Comments

Plastics assist designers with Chrysler 200 interior

By Rhoda Miel
News Editor

Published: January 13, 2014 5:15 pm ET
Updated: January 14, 2014 4:52 pm ET

Post Your Comments


Back to story


More stories

Image

Latvian plastics recycler Nordic Plast boosts capacity

September 16, 2014 10:15 am ET

Latvian plastics waste recycler Nordic Plast Ltd. has invested more than 2.5 million euros ($3.2 million) to expand capacity and modernize production ...    More

Image

Increased capacity in the US helps Zeon Chemical supply seals globally

September 16, 2014 9:46 am ET

The automotive industry continues to be one of the driving forces of Zeon Chemicals LP., which specializes in heat-resistant and oil-resistant...    More

Image

ZF finalizes deal to buy TRW, creating another global auto supply giant

September 15, 2014 1:09 pm ET

TRW Automotive Holdings, in a supply chain megadeal that has been in the works since mid-July, said Sept. 15 it has agreed to be acquired by German...    More

Image

Delphi CEO O'Neal stepping down

September 15, 2014 12:05 pm ET

Delphi Automotive plc announced that Rodney O'Neal will retire as CEO and president on March 1, 2015, ending his 43-year career at the global...    More

Image

Sabic, Chinese Academy of Sciences sign five-year development agreement

September 15, 2014 11:54 am ET

Ties between one of the world's biggest oil producers and one of its biggest consumers grew tighter Sept. 12 with the announcement of a five-year agre...    More

Market Reports

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events