Auto suppliers eye presence in Russian market

Nick Gibbs
Automotive News Europe

Published: January 22, 2014 10:48 am ET
Updated: January 22, 2014 10:57 am ET

Related to this story

Topics Automotive, Europe, Automotive parts
Companies & Associations Ford Motor Co., Nissan Motor Corp., Visteon Corp.

DETROIT — Russia's "weak" auto parts industry is expected to improve as Tier 1 suppliers such as Visteon Corp. and Robert Bosch GmbH increase their presence in the market and component makers such as GKN Driveline, TRW Automotive and Getrag consider setting up operations there.

The suppliers are being drawn to Russia by auto makers that hope to capitalize on forecast growth. Russia's new-vehicle sales are expected to rise to 4.4 million by 2020 from 2.9 million last year, according to consultancy Boston Consulting Group. If that happens Russia would pass Germany to become Europe's largest new-car market.

The problem is that only about 25 percent of the parts on locally built cars are produced in Russia. That figure, however, is expected to rise to 30 percent to 35 percent in the next 18 to 24 months, BCG analyst Nikolaus Lang said in an interview. Lang authored a report last summer that singled out local parts sourcing as a big problem in Russia, but he told Automotive News Europe that the situation is getting better: "The localization of international suppliers is improving."

Changes underway

Bosch is building a second automotive parts factory in Russia. The new plant will be based in Samara, the same state as Renault-Nissan-AvtoVAZ's massive Togliatti factory. Bosch said that by 2015, it plans to invest more than $54 million in the new location, where it will make antilock braking systems and alternators, mainly for local customers.

Visteon strengthened its position in Russia last October when it increased its stake to 69 percent from 49 percent in its interior electronics joint venture with Russia's Avtopribor. The move made Visteon a majority shareholder in one of Russia's leading cockpit electronics suppliers, said the company, whose customers include Ford Motor Co. and Renault-Nissan-AvtoVAZ.

Among the suppliers investigating whether to build a factory in Russia is GKN Driveline.

"As the car companies move into Russia, they're looking for companies like GKN to move with them to supply local content," James Voeffray, head of program management and strategy at the driveshaft maker, told Automotive News Europe.

Separately, GKN Driveline CEO Andrew Reynolds Smith said the company would reveal its plan for Russia soon.

Other suppliers are eyeing Russia. Transmission maker Getrag is working on a plan for Russia. "I think we would be able to announce something in the next three years," Getrag CEO Mihir Kotecha told Automotive News Europe.

Safety specialist TRW Automotive also is interested in the market.

"We have no reason not to support manufacturing in Russia," Peter Lake, TRW executive vice president of sales and business development, told Automotive News Europe. "It's just a question of time."

Massive investments

BCG's recent report said that in the last two years, Ford, General Motors, BMW, Renault-Nissan, Toyota, Mazda, Hyundai/Kia, PSA/Peugeot-Citroen, Mitsubishi and Volkswagen/Audi have established or expanded capacity in Russia.

Overall, $10 billion has been committed to manufacturing up until 2020.

"After the crisis in 2009, car makers now believe in the relative stability of market volumes, so that triggers the attention of the suppliers," Lang said.

Car makers are looking to source more parts from Russia to cut costs and to meet a government-mandated target of having 60 percent local content to qualify for reduced import tariffs. Ford is working toward meeting that target.

"We continue our plan to localize materials in Russia to reduce logistics costs," Ford Russia CEO Ted Cannis told Automotive News Europe. "We continue to be pleased with the quality and commitment of our suppliers."

Most individual brands' market share in Russia, however, will never be big enough to commit to building engine or transmission plants in the country.

"In Brazil, where GM, VW and Fiat dominate the market with roughly 1 million cars sold each, they can warrant engine plants. In Russia, with the exception of Renault-Nissan-AvtoVAZ, all the other major OEMs are around 10 percent (market share), and then it's much more difficult to justify," Lang said.

Currently AvtoVAZ, which makes the country's top-selling Lada brand, is the only car maker with engine output in Russia, although VW will add an engine plant near its factory in Kaluga with an annual capacity of 150,000 units starting next year.


Comments

Auto suppliers eye presence in Russian market

Nick Gibbs
Automotive News Europe

Published: January 22, 2014 10:48 am ET
Updated: January 22, 2014 10:57 am ET

Post Your Comments


Back to story


More stories

Image

Ascend targets nylon for auto applications, opening propylene monomer unit in Texas

April 18, 2014 10:57 am ET

Materials firm Ascend Performance Materials Inc. is in full operation at its new nylon 6/6 compounding line in Florida and will break ground by the...    More

Dutch company launching $100 million PP, PE recycling plant

April 18, 2014 10:42 am ET

Quality Circular Polymers is building a new plastics recycling operation in Geleen, the Netherlands' Chemelot industrial chemical site, with a...    More

Spain's Cristian Lay Group buys two materials units of bankrupt LSB

April 17, 2014 11:11 am ET

Spanish industrial conglomerate Cristian Lay Group has purchased two of the bankrupt Spanish PET packaging group La Seda de Barcelona.    More

Image

German auto supplier Dr. Schneider opens second US plant

April 17, 2014 12:57 pm ET

Dr. Schneider Kunststoffwerke GmbH, a German supplier of plastic interior auto parts, has opened a $29 million manufacturing plant in Russell Springs,...    More

Image

Using social media to answer consumer questions about plastics

April 17, 2014 10:59 am ET

Plastic packaging was stoutly defended on a recent Q&A session on social media site Twitter, run jointly by the British Plastics Federation and scienc...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events