Auto suppliers eye presence in Russian market

Nick Gibbs
Automotive News Europe

Published: January 22, 2014 10:48 am ET
Updated: January 22, 2014 10:57 am ET

Related to this story

Topics Automotive, Europe, Automotive parts
Companies & Associations Ford Motor Co., Nissan Motor Corp., Visteon Corp.

DETROIT — Russia's "weak" auto parts industry is expected to improve as Tier 1 suppliers such as Visteon Corp. and Robert Bosch GmbH increase their presence in the market and component makers such as GKN Driveline, TRW Automotive and Getrag consider setting up operations there.

The suppliers are being drawn to Russia by auto makers that hope to capitalize on forecast growth. Russia's new-vehicle sales are expected to rise to 4.4 million by 2020 from 2.9 million last year, according to consultancy Boston Consulting Group. If that happens Russia would pass Germany to become Europe's largest new-car market.

The problem is that only about 25 percent of the parts on locally built cars are produced in Russia. That figure, however, is expected to rise to 30 percent to 35 percent in the next 18 to 24 months, BCG analyst Nikolaus Lang said in an interview. Lang authored a report last summer that singled out local parts sourcing as a big problem in Russia, but he told Automotive News Europe that the situation is getting better: "The localization of international suppliers is improving."

Changes underway

Bosch is building a second automotive parts factory in Russia. The new plant will be based in Samara, the same state as Renault-Nissan-AvtoVAZ's massive Togliatti factory. Bosch said that by 2015, it plans to invest more than $54 million in the new location, where it will make antilock braking systems and alternators, mainly for local customers.

Visteon strengthened its position in Russia last October when it increased its stake to 69 percent from 49 percent in its interior electronics joint venture with Russia's Avtopribor. The move made Visteon a majority shareholder in one of Russia's leading cockpit electronics suppliers, said the company, whose customers include Ford Motor Co. and Renault-Nissan-AvtoVAZ.

Among the suppliers investigating whether to build a factory in Russia is GKN Driveline.

"As the car companies move into Russia, they're looking for companies like GKN to move with them to supply local content," James Voeffray, head of program management and strategy at the driveshaft maker, told Automotive News Europe.

Separately, GKN Driveline CEO Andrew Reynolds Smith said the company would reveal its plan for Russia soon.

Other suppliers are eyeing Russia. Transmission maker Getrag is working on a plan for Russia. "I think we would be able to announce something in the next three years," Getrag CEO Mihir Kotecha told Automotive News Europe.

Safety specialist TRW Automotive also is interested in the market.

"We have no reason not to support manufacturing in Russia," Peter Lake, TRW executive vice president of sales and business development, told Automotive News Europe. "It's just a question of time."

Massive investments

BCG's recent report said that in the last two years, Ford, General Motors, BMW, Renault-Nissan, Toyota, Mazda, Hyundai/Kia, PSA/Peugeot-Citroen, Mitsubishi and Volkswagen/Audi have established or expanded capacity in Russia.

Overall, $10 billion has been committed to manufacturing up until 2020.

"After the crisis in 2009, car makers now believe in the relative stability of market volumes, so that triggers the attention of the suppliers," Lang said.

Car makers are looking to source more parts from Russia to cut costs and to meet a government-mandated target of having 60 percent local content to qualify for reduced import tariffs. Ford is working toward meeting that target.

"We continue our plan to localize materials in Russia to reduce logistics costs," Ford Russia CEO Ted Cannis told Automotive News Europe. "We continue to be pleased with the quality and commitment of our suppliers."

Most individual brands' market share in Russia, however, will never be big enough to commit to building engine or transmission plants in the country.

"In Brazil, where GM, VW and Fiat dominate the market with roughly 1 million cars sold each, they can warrant engine plants. In Russia, with the exception of Renault-Nissan-AvtoVAZ, all the other major OEMs are around 10 percent (market share), and then it's much more difficult to justify," Lang said.

Currently AvtoVAZ, which makes the country's top-selling Lada brand, is the only car maker with engine output in Russia, although VW will add an engine plant near its factory in Kaluga with an annual capacity of 150,000 units starting next year.


Comments

Auto suppliers eye presence in Russian market

Nick Gibbs
Automotive News Europe

Published: January 22, 2014 10:48 am ET
Updated: January 22, 2014 10:57 am ET

Post Your Comments


Back to story


More stories

Image

German auto supplier Benecke-Kaliko to build second plant in China

October 1, 2014 10:24 am ET

German auto supplier Benecke-Kaliko AG is set to build its second Chinese facility, in Changzhou, to produce surface materials for automotive...    More

Image

New Hexcel plant will supply carbon fiber for Airbus A350 XWB

September 30, 2014 2:43 pm ET

Hexcel Corp. is investing $250 million on a new carbon fiber plant in France, with part of the production going into the future Airbus SAS A350 XWB.    More

Image

RJG buys UK training group G&A

September 30, 2014 11:10 am ET

G&A Moulding Technology Ltd., a United Kingdom-based training and consultancy group, has been bought by RJG Inc., the U.S.-based training business.    More

Image

Ohio molder Denbro Plastics moves to new location

September 29, 2014 6:17 pm ET

Logo products injection molder Denbro Plastics Co. has moved to another plant within Toledo, Ohio, to streamline production and improve efficiency.    More

Image

Audacious vandal stuns Taipei Plas

September 29, 2014 4:59 pm ET

Melodrama erupted at the traditionally tranquil Taipei Plas trade show on Sept. 28 when a mysterious intruder flung red paint at the Baumüller Automat...    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events