Environmental group shuts down anti-PVC campaign

By Gayle S. Putrich
Staff Reporter

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: January 23, 2014 7:36 pm ET
Updated: January 23, 2014 7:39 pm ET

Related to this story

Topics Sustainability, Public Policy, Materials

WASHINGTON — An environmental and public health watchdog group known for its campaigns against PVC and phthalates is shuttering its national campaigns to focus on grassroots activism and training.

Over the years the Center for Health, Environment and Justice (CHEJ), based in Falls Church, Va., has turned up the heat on the vinyl industry, with fact sheet, reports and educational campaigns labeling PVC as "the poison plastic" in an effort to get it removed from children's toys, schools and new construction.

Mike Schade, who led CHEJ's charge as campaign coordinator, said that in his eight years with the group, he has seen some of the world's largest companies, including Wal-Mart, Target, Sears and Best Buy create policies to phase out or completely eliminate PVC from their products.

"Another major accomplishment was the release of EPA's landmark study on the non-cancer effects of dioxin, which the [American Chemistry Council] and chemical industry was fighting for over 20 years. We have also supported successful procurement efforts, such as in New York City, reducing government procurement of PVC products," Schade told Plastics News via email. "We've seen a major market movement away from PVC in certain consumer products, from toys and electronics to sneakers, automobiles and packaging."

At the Vinyl Institute, Allen Blakey, vice president for industry and government affairs, notes that while CHEJ has been a formidable opponent, keeping the industry on its toes, the global vinyl market remains healthy.

"There is no meaningful evidence that vinyl is losing market share because of activist pressure, and attack groups have never shown any actual harm from the material. U.S. vinyl production is as high as it's ever been, some 15 billion pounds. What's more, our industry employs more than 350,000 people working in more than 2,900 facilities, and its combined economic value amounts to $54 billion," Blakey said. "I will say one thing about market pressure: it makes companies and products better. Competition among materials, as well as regulation and rising environmental awareness, have helped to focus this industry on studying and mitigating our impacts and improving the material and products."

Today, vinyl products are being certified as low-VOC, recycled, and sustainable, he said.

"Despite decades of pressure from opponents, consumers continue to recognize vinyl's safe, effective uses," Blakey said.

Schade, who is moving on to work with Safer Chemicals Healthy Families (SCHF) and its Mind the Store Campaign, says the work started by CHEJ is not yet complete and will be continued by other organizations as well as at the grassroots level by individuals the refocused CHEJ plans to train.

The building and construction sector has been "been a more challenging sector for our movement to tackle," Schade said, but he believes that industry will soon see change as well.

"New green building specifications adopted by USGBC and the Living Building Challenge will only further accelerate the green building sector away from toxic PVC and phthalates," he said. "The green building sector's move towards transparency, as seen in Pharos and the Health Product Declaration, will also drive the market towards safer PVC-free building materials."


Comments

Environmental group shuts down anti-PVC campaign

By Gayle S. Putrich
Staff Reporter

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: January 23, 2014 7:36 pm ET
Updated: January 23, 2014 7:39 pm ET

Post Your Comments


Back to story


More stories

California lawmakers give final approval to plastic bag ban

August 30, 2014 6:00 am ET

Under the measure, single-use plastic bags will be barred from California retailers, including grocery stores, convenience stores and drug stores, as ...    More

Image

Poor plastic coating prompts cable recall

August 29, 2014 2:10 pm ET

Australia's competition regulator, the Australian Competition and Consumer Commission (ACCC), has ordered a major recall of 2,485 miles of electrical ...    More

Image

EPA fines RI polymer company

August 29, 2014 1:20 pm ET

A Rhode Island polymer manufacturer has reached a $60,000 settlement with the U.S. Environmental Protection Agency (EPA) for violating federal clean...    More

Image

Chinese compounders seek market shares, often at the expense of margins

August 29, 2014 10:02 am ET

China's largest compounder, Kingfa Sci. & Tech. Co. Ltd., as well as its more automotive-focused counterparts Shanghai Pret Composites Co. Ltd. and...    More

Image

Green trend boosts plastic building materials business in China

August 29, 2014 9:42 am ET

The greening of China's domestic building materials market is giving the plastics industry a boost.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events