PS up 6 cents on feedstock prices, stronger demand

By Frank Esposito
Senior Staff Reporter

Published: February 6, 2014 2:26 pm ET
Updated: February 10, 2014 5:24 pm ET

Related to this story

Topics Materials Canada Mexico United States Polystyrene Materials Suppliers
Companies & Associations American Chemistry Council

North American solid polystyrene resin prices continued their recent surge in January, climbing an average of 6 cents per pound.

Regional PET bottle resin prices, however, headed in the other direction, dropping an average of 1 cent per pound in January amidst weak seasonal demand.

The PS hike was tied into higher prices for benzene feedstock, as well as to surprisingly strong demand. Benzene prices closed at $4.84 per gallon in January – up 8 percent from December.

A 9 percent November-December benzene price hike had allowed solid PS prices for December to increase by an average of 4 cents per pound. The 10-cent PS price jump in December-January has taken some buyers and market watchers by surprise, especially since total PS price volatility for 2013 – including increases and decreases – totaled only 16 cents, according to the Plastics News resin pricing chart.

Recent PS price hikes also have been supported by demand growth – something which has been rare in the North American PS market. Regional demand grew 1.1 percent in 2013 – according to the American Chemistry Council in Washington - marking the first increase in PS demand since 2011 and only the second year-on-year demand increase in the last decade.

Higher prices and competition from other resins had reduced regional PS sales – including EPS - from 6.8 billion pounds in 2004 to 5.4 billion pounds in 2012. Solid PS end market growth in 2013 came from the consumer/institutional (up 1.7 percent) and Food Packaging/Food Service (up 1.5 percent) end markets.

North American PS makers now are working to raise prices by another 4 cents per pound for January. Market watchers told Plastics News that recent erosion in spot process for benzene might make it difficult for producers to secure all of that increase.

In PET, cold winter weather in much of the U.S. sapped beverage demand, sending prices down a penny. Lower feedstock prices could send PET bottle resin prices down even further in February, market watchers said.

North American PET demand growth for 2013 was estimated at no higher than 1-2 percent. Recent growth has been limited because of bottle lightweighting and a societal move away from carbonated soft drinks in favor of bottled water — which uses less PET per bottle — and other healthier drinks.

The regional PET market also enjoyed less 2013 volatility when compared to recent years. Total PET price volatility for the year came in at 12 cents.

 


Comments

PS up 6 cents on feedstock prices, stronger demand

By Frank Esposito
Senior Staff Reporter

Published: February 6, 2014 2:26 pm ET
Updated: February 10, 2014 5:24 pm ET

Post Your Comments


Back to story


More stories

Image

PolyOne launches Geon BIO PVC using soy-based materials

April 24, 2015 11:48 am ET

More than a decade of research is paying off for Battelle Memorial Institute in the form of Geon BIO PVC compounds from PolyOne Corp.    More

Image

Study suggests infants at lower risk from BPA exposure than expected

April 23, 2015 4:58 pm ET

A new study shows that newborn babies may have less risk from bisphenol A exposure than originally thought.    More

Image

Braskem and Odebrecht reconsidering West Virginia plastics project

April 23, 2015 2:54 pm ET

Brazilian firms Braskem and Odebrecht have confirmed that they are re-evaluating Project Ascent, the major plastics and petrochemicals project they...    More

Image

DuPont center in India gets LEED Certification

April 23, 2015 1:07 pm ET

DuPont Co.'s Knowledge Center in Hyderabad, India, was awarded LEED certification by the U.S. Green Building Council.    More

Image

SiVance opens new R&D lab

April 23, 2015 12:07 pm ET

Milliken & Co. unit SiVance LLC has opened a new research and development lab for silicone and silane technologies in Gainesville, Fla.    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 15, 2015 - September 17, 2015Plastics Caps & Closures - September 2015

More Events